CM1000BGTR - Washing machine Profilo - Free user manual and instructions

Product Type	Front-loading washing machine
Capacity	10 kg
Spin Speed	1000 rpm
Dimensions (W x H x D)	60 cm x 85 cm x 55 cm
Weight	70 kg
Power Supply	220-240 V, 50 Hz, 10 A
Energy Consumption	0.75 kWh per cycle (typical)
Water Consumption	50 L per cycle (approximate)
Noise Level (Wash/Spin)	56 dB / 76 dB
Programs	Cotton, Synthetics, Delicates, Quick 30', Wool, Hand Wash, Rinse & Spin, Drain
Temperature Settings	Cold, 30°C, 40°C, 60°C, 90°C
Additional Features	Delay start (up to 24h), Child lock, End of cycle signal, LED display
Drum Material	Stainless steel
Door Type	Transparent glass, 180° opening
Care & Cleaning	Clean drum cycle, drain filter cleaning, detergent drawer cleaning
Safety Features	Overload protection, anti-flood system, unbalanced load detection
Spare Parts Availability	Door seal, drum bearings, pump filter, control board, belts
Repairability Index	7.0 / 10 (estimated)
Energy Class	A+++ (typical)
Installation Type	Freestanding

Frequently Asked Questions - CM1000BGTR Profilo

How do I clean the drain filter?

Open the lower front panel, unscrew the filter cap, remove lint and debris, and rinse it under running water. Ensure the filter is securely replaced before use.

What should I do if the washing machine does not start?

Check if the door is fully closed, the child lock is activated, or the water supply is on. Also ensure the power cord is plugged in and the circuit breaker hasn't tripped.

How can I reduce vibration during spin?

Make sure the machine is level on the floor, the transit bolts are removed, and the load is balanced. Avoid overfilling the drum.

What does the error code 'E01' mean?

Error E01 usually indicates a door lock issue. Check if the door is properly closed and the latch is clean. If persistent, the door lock assembly may need replacement.

Can I use a delay start with any program?

Yes, delay start can be set up to 24 hours for most programs. Press the delay button to select the desired delay time before starting the cycle.

How often should I run a drum cleaning cycle?

It is recommended to run a drum clean program once a month to prevent mold and odor. Use a washing machine cleaner or run an empty 90°C cotton cycle with bleach.

What is the maximum spin speed for delicates?

For delicate fabrics, select a spin speed no higher than 400-600 rpm to avoid damage. The machine automatically adjusts for delicate programs.

How do I activate the child lock?

Press and hold the Child Lock button for 3 seconds until the indicator lights up. To deactivate, press and hold again. When active, all buttons except power are disabled.

Why is there water on the floor around the machine?

Check the hose connections for leaks, the drain filter for blockage, or if the door seal is damaged. Also ensure the machine is level to prevent overflow.

What is the recommended detergent dosage?

Follow the detergent manufacturer’s instructions. For soft water and light soil, use 1-2 tablespoons of liquid or powder. For hard water or heavy soil, increase slightly. Avoid over-sudsing.

USER MANUAL CM1000BGTR Profilo

Line drawing of a washing machine with front panel, control panel, and buttons (no text or symbols)

ÇamaşırMakinesi

İçindekiler