R 545 C - Heating ZIBRO - Free user manual and instructions

Product Type	Portable Electric Heater (Convector)
Brand	Zibro
Model	R 545 C
Heating Principle	Convection
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	2000 W (max)
Heating Levels	2 (1000 W / 2000 W)
Thermostat	Adjustable, built-in
Safety Features	Overheat protection, tip-over switch
Dimensions (W x H x D)	43 cm x 35 cm x 14 cm
Weight	3.5 kg
Construction Material	Metal body, plastic grille
Color	White / Silver
Controls	Rotary knob for power and thermostat
Indicators	Power on LED
Heating Area	Up to 25 m²
Noise Level	< 40 dB (no fan)
Additional Features	Frost protection mode, carry handle
Maintenance	Clean with dry cloth; do not immerse
Accessories Included	User manual, no feet (built-in stand)
Spare Parts Availability	Contact Zibro service center
Energy Efficiency Class	Not rated (estimated C)

Frequently Asked Questions - R 545 C ZIBRO

How do I set the desired temperature on the Zibro R 545 C?

Turn the thermostat knob clockwise to increase the temperature setting. The heater will automatically cycle on/off to maintain the set temperature.

What should I do if the heater does not turn on?

Check that the power cord is plugged into a working outlet and the power switch is set to an on position. Also, ensure the tip-over switch is not activated (place the heater on a flat, stable surface).

Can the R 545 C be used in a bathroom?

No, this heater is not designed for wet or humid areas. Keep it away from water sources to avoid electrical shock.

How do I clean the heater?

Disconnect the heater from the power supply and let it cool down. Use a soft dry cloth to wipe the exterior. Do not use water or cleaning agents, and do not insert objects into the vents.

Is there an overheat protection feature?

Yes, the Zibro R 545 C is equipped with an automatic overheat protection that shuts off the heater if it exceeds safe operating temperature. It will automatically restart once cooled down.

What is the maximum heating area for this model?

The R 545 C is suitable for rooms up to approximately 25 m², depending on insulation and ambient temperature.

Can I leave the heater unattended overnight?

It is recommended not to leave the heater unattended for extended periods. Always ensure it is placed on a non-flammable surface and away from curtains or furniture.

How do I activate the frost protection mode?

Set the thermostat to the lowest setting (usually indicated by a frost symbol). The heater will maintain a minimum temperature to prevent freezing, but will not heat the room fully.

Why does the heater make a clicking sound?

Clicking sounds are normal and are caused by the expansion and contraction of the metal parts as the heater heats up and cools down.

Where can I purchase spare parts for the Zibro R 545 C?

Spare parts such as knobs or switches can be ordered from authorized Zibro service centers or through the manufacturer's website.

USER MANUAL R 545 C ZIBRO

Active CO + temp control

DECLARATION OF CE CONFORMITY

to directive 89/336/CEE "ElectroMagnetism Compatibility" (EMC)

We declare that the product

Identification of the article	:	Kerosene heater
Brandname	:	Zibro Kamin
Type	:	R 545 C + CO , R 845 C + CO
Producer	:	Toyotomi Co Ltd

is conform to the following specified harmonised standards

EN 55014 (93), EN 60555 (87) and EN 50082-1 (92) for household electrical appliances

based on tests which are realised by the laboratory

Name company	:	PVG-International bv
Name undersigned	:	P.J. van Vugt
Function undersigned	:	Managing Director
Address company	:	Nieuwe Hescheweg 115342 EB Oss, Netherlands
Activities company	:	Importer

Place, date and signature:

Oss, May 21, 1997

Diagram of a mechanical device with two views showing internal components (no text or symbols)

Duw even later de veiligheidsknop in (fig.3).

R 845 C + CO

Illustration of a hand holding a rotary dial with three circular buttons, no text or symbols present

1

Illustration of a hand pressing a button on a mechanical component (no text or symbols)

2

Technical line drawing of a mechanical component with no visible text or symbols

3

Technical line drawing of a mechanical assembly with no visible text or symbols

4

Illustration of hands operating a mechanical device with no visible text or symbols

5

Hand holding a gear with motion arrows indicating rotational direction (no text or symbols)

6

Distributed in Europe by: PVG INTERNATIONAL B.V.

HOLLAND

PVG International B.V.

Nieuwe Hescheweg 11/P.O.Box 96

5342 EB OSS

/5340 AB OSS

tel: [phone]

fax: [phone]

POLSKA

PVG Polska sp. z. o. o.

UI. Polanska 68

26-800 BIALOBRZEGI

tel: [phone]

fax: [phone]

BELGIUM

PVG Belgium NV/SA

Industrielaan 55

2900 SCHOTEN

tel: [phone]

fax: [phone]

DENMARK

PVG International B.V.

Rønkaergardvej 20

6100 HADERSLEV

tel: [phone]

fax: [phone]

DEUTSCHLAND

PVG International B.V.

Nieuwe Hescheweg 11

5342 EB OSS (die Niederlande)

tel: [phone]

fax: [phone]

UNITED KINGDOM

RK Marketing

Birch Bank

Upton Magna

SHREWSBURY SHROPSHIRE SY4 4TZ

tel: [phone]

fax: [phone]

FRANCE

PVG France SARL