JGB697EEHES - Cooker GE - Free user manual and instructions
Find the device manual for free JGB697EEHES GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Range |
| Brand | GE |
| Model | JGB697EEHES |
| Fuel Type | Natural Gas (convertible to LP) |
| Oven Capacity | 5.0 cu ft |
| Number of Burners | 5 |
| Cooktop Configuration | Sealed gas burners with electronic ignition |
| Oven Features | Self-cleaning, broiler, bake, convection optional |
| Width | 30 inches |
| Depth | 26.5 inches |
| Height | 47.25 inches (with backguard) |
| Weight | 195 lbs |
| Power Supply | 120V/60Hz for ignition and oven control |
| Gas Connection | 1/2" NPT male, rear center |
| Control Type | Knobs for burners, electronic oven thermostat |
| Oven Cleaning | Self-clean cycle with lock feature |
| Safety Features | Flame failure device on all burners, oven door lock during self-clean |
| Storage | Lower storage drawer |
| Color | Stainless steel or black (depends on variant) |
| Warranty | 1 year parts and labor |
Frequently Asked Questions - JGB697EEHES GE
How do I convert the range from natural gas to LP?
To convert to LP gas, you must replace the burner orifices and adjust the air shutters. Refer to the installation manual for specific kit and instructions. Always have a qualified technician perform the conversion.
Why won't the oven ignite?
Check that the gas supply is on and the oven control is set properly. Ensure the igniter is glowing. If the igniter does not glow, it may be faulty and need replacement. Also, check the oven door switch and safety valve.
How do I use the self-cleaning cycle?
Remove all oven racks and accessories. Close the oven door securely. Press the self-clean button and select the desired cleaning time (usually 3-4 hours). The oven door will lock automatically. After the cycle, wait for the oven to cool before opening.
What should I do if the oven temperature is inaccurate?
The oven thermostat may need calibration. Use an oven thermometer to test. To adjust, press the bake button and hold for 5 seconds until calibration mode appears, then adjust up or down by 10 degrees increments.
How do I clean the cooktop burners?
Remove the burner caps and grates. Wash them in warm soapy water. Do not immerse the burner base. Clean the burner ports with a soft brush. Dry thoroughly before reassembly.
Can I use aluminum foil on the bottom of the oven?
No, do not line the oven bottom with foil as it can restrict airflow and damage the oven. Use a drip pan on a lower rack for spills.
How do I replace the oven light bulb?
Turn off power to the range. Remove the glass cover by twisting or prying it off. Replace with a 40-watt appliance bulb. Do not use standard household bulbs.
Why is the igniter clicking continuously?
Continuous clicking usually indicates a wet or dirty igniter, or a burner cap not properly seated. Clean the igniter and burner cap, ensure they are dry. If the problem persists, the igniter module may be faulty.
How do I level the range?
Use a bubble level on the oven floor. Adjust the front leveling legs by turning them clockwise or counterclockwise. For rear adjustment, you may need to tilt the range slightly. Ensure all four feet touch the floor.
What does the error code F11 mean on the display?
Error code F11 indicates a communication failure between the oven control board and the display. Try resetting the range by turning off the circuit breaker for 30 seconds. If it recurs, a technician may need to replace the control board.
User questions about JGB697EEHES GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual JGB697EEHES - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JGB697EEHES by GE.