DX-16E220NA16 - Television Dynex - Free user manual and instructions
Find the device manual for free DX-16E220NA16 Dynex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED TV |
| Brand | Dynex |
| Model | DX-16E220NA16 |
| Screen Size | 16 inches (diagonal) |
| Display Resolution | 1366 x 768 (720p HD) |
| Refresh Rate | 60 Hz |
| Dimensions (Without Stand) | 15.1 x 9.8 x 2.8 inches |
| Weight (Without Stand) | 5.7 lbs |
| Power Supply | 120V AC, 60 Hz |
| Power Consumption | 30W (typical) |
| Inputs | 1 x HDMI, 1 x USB, 1 x Composite AV, 1 x Coaxial RF |
| Outputs | 1 x Headphone Jack |
| Tuner | ATSC (Digital) / NTSC (Analog) |
| Speakers | 2 x 3W |
| VESA Mount | 75 x 75 mm |
| Remote Control | IR remote included |
| Stand Type | Tabletop stand included |
| Wall Mountable | Yes |
| Energy Star Certified | Yes |
| Included Accessories | Remote control, user manual, stand base, power cord |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety Notice | Keep away from water and heat sources. Do not block ventilation slots. |
Frequently Asked Questions - DX-16E220NA16 Dynex
How do I connect an external device like a DVD player to my Dynex DX-16E220NA16 TV?
Use an HDMI cable or composite AV cable (red/white/yellow). Connect to the corresponding inputs on the back of the TV. Then press the Input button on the remote to select the correct source.
What type of remote control does the DX-16E220NA16 use?
It uses a standard infrared (IR) remote. Point the remote directly at the sensor on the TV. Replace the batteries when the remote stops working.
How do I perform a channel scan on my Dynex TV?
Press the Menu button, go to Channel or Antenna settings, and select Auto Scan or Auto Tuning. The TV will search for available over-the-air channels.
Can I mount this TV on the wall?
Yes, the DX-16E220NA16 supports VESA 75 x 75 mm wall mounts. Ensure the mount can support the TV's weight (about 5.7 lbs).
What should I do if there is no sound from the TV?
First, check that the volume is not muted and is turned up. Then, verify the audio output settings in the menu. If using external speakers, ensure they are properly connected and powered. Also, try a different HDMI cable.
How do I clean the TV screen safely?
Turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. Do not spray any liquid directly on the screen. For stubborn smudges, slightly dampen the cloth with water.
Why is my TV screen displaying a 'No Signal' message?
This means the TV is not receiving a signal from the selected input. Ensure your device is powered on and connected correctly. Try pressing the Input button to cycle through sources. If using an antenna, check the antenna connection and perform a channel scan.
Does the Dynex DX-16E220NA16 have a USB port? What can I use it for?
Yes, it has one USB port on the back. You can use it to connect a USB flash drive to play music, photos, or videos supported by the TV's media player (check user manual for supported formats).
How do I reset the TV to factory settings?
Press Menu on the remote, navigate to Settings or System, and select Factory Reset. Confirm the action. This will erase all personal settings and return the TV to its original state.
The remote control is not working. What can I do?
Check that the batteries are fresh and installed correctly. Remove any obstacles between the remote and the TV. Try pressing the Power button directly on the TV. If the TV works, the remote may need replacement.
User questions about DX-16E220NA16 Dynex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual DX-16E220NA16 - Dynex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DX-16E220NA16 by Dynex.