TLD 3703 - Television TELEFUNKEN - Free user manual and instructions
Find the device manual for free TLD 3703 TELEFUNKEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Television |
| Screen Size | 37 inches (94 cm) |
| Resolution | 1920 x 1080 (Full HD) |
| Refresh Rate | 60 Hz |
| Dimensions (with stand) | 34.6 x 22.4 x 8.7 inches (88 x 57 x 22 cm) |
| Weight (with stand) | 16.5 lbs (7.5 kg) |
| Power Consumption (typical) | 120 W |
| Standby Power Consumption | < 0.5 W |
| Inputs | 2 x HDMI, 1 x USB 2.0, 1 x VGA, 1 x Composite, 1 x Antenna |
| Outputs | 1 x Digital Audio (Optical), 1 x Headphone Jack |
| Sound System | 2 x 8W Speakers, Dolby Audio |
| Smart TV | No |
| VESA Mount Compatible | Yes (200 x 200 mm) |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use harsh chemicals. |
| Safety | Place on stable surface; ensure ventilation; do not block vents. |
| Spare Parts and Repairability | Contact Telefunken service for replacement parts; power cord and remote available. |
| General Information | Model: TLD 3703, Brand: Telefunken, Category: Television |
Frequently Asked Questions - TLD 3703 TELEFUNKEN
The TV won't turn on. What should I check?
First, ensure the power cord is firmly plugged into the wall outlet and the TV. Try a different outlet. If still no power, the fuse may be blown. Contact support.
No picture but sound is working.
Check the input source is correct. Press the 'Source' button on the remote. Also ensure the brightness and contrast settings are not set to minimum.
Remote control is not responding.
Replace the batteries in the remote. Check for obstructions between remote and TV sensor. If still not working, try resetting the remote by removing batteries and pressing any button for 10 seconds.
How do I connect external speakers?
Use the digital audio output (optical) or the headphone jack with an appropriate adapter. Go to Sound settings in the menu to select external audio.
The screen has a flickering image.
Check the refresh rate setting in the picture menu. Try a different source (e.g., HDMI vs. antenna). If flicker persists, there may be a backlight issue – contact service.
How to perform a factory reset?
Go to Settings > System > Factory Reset. Enter the PIN if prompted (default 0000). Confirm to restore default settings. All customizations will be lost.
Why is the TV showing 'No Signal'?
Ensure the connected device (cable box, game console) is powered on. Check the cable connection. Use the Source button to cycle through inputs until you find the active one.
Can I mount this TV on a wall?
Yes, the TV is VESA compatible (200 x 200 mm). Use a suitable wall mount and follow the instructions. Ensure the wall can support the TV's weight (16.5 lbs).
How do I clean the screen?
Turn off and unplug the TV. Use a soft, dry microfiber cloth to gently wipe the screen. Do not spray liquid directly. For stubborn stains, slightly dampen the cloth with water.
There is sound from the TV but no video from HDMI.
Try a different HDMI cable or port. Ensure the source device output is set to HDMI. If using a laptop, try pressing Win + P and selecting 'Duplicate' or 'Extend'.
User questions about TLD 3703 TELEFUNKEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual TLD 3703 - TELEFUNKEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TLD 3703 by TELEFUNKEN.