107B10 - Monitor PHILIPS - Free user manual and instructions
Find the device manual for free 107B10 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CRT Monitor |
| Model | 107B10 |
| Brand | Philips |
| Screen Size | 17 inches (43.2 cm) diagonal |
| Display Type | Shadow mask CRT |
| Dot Pitch | 0.25 mm |
| Maximum Resolution | 1280 x 1024 @ 60 Hz |
| Recommended Resolution | 1024 x 768 @ 85 Hz |
| Horizontal Scan Range | 30 - 70 kHz |
| Vertical Refresh Range | 50 - 160 Hz |
| Input Signal | Analog RGB (D-sub 15-pin) |
| Power Consumption (On) | 85 W (typical) |
| Power Consumption (Standby) | < 10 W |
| Power Consumption (Off) | < 5 W |
| Weight (net) | 16.5 kg |
| Dimensions (W x H x D) with stand | 410 x 420 x 420 mm |
| On-Screen Display (OSD) | Yes, with multiple languages |
| Anti-Glare Coating | Yes |
| Energy Star Compliant | Yes |
| Plug & Play | DDC1/2B compatible |
| Cleaning | Use a soft, dry cloth. Do not use abrasive cleaners. |
| Safety | Complies with MPR-II and TCO standards |
| Spare Parts Availability | Limited; contact Philips support for availability |
| Repairability | Repairs should be performed by qualified technicians only |
Frequently Asked Questions - 107B10 PHILIPS
How do I clean the screen of my Philips 107B10 monitor?
Use a soft, dry cloth to gently wipe the screen. If needed, slightly dampen the cloth with water. Do not use alcohol, ammonia, or abrasive cleaners.
What is the maximum resolution supported by the Philips 107B10?
The maximum resolution is 1280 x 1024 at a refresh rate of 60 Hz. The recommended resolution for optimal clarity is 1024 x 768 at 85 Hz.
How do I adjust the display settings like brightness and contrast?
Use the On-Screen Display (OSD) buttons located on the front panel of the monitor. Press the Menu button to access settings, then navigate with the arrow buttons.
Why does my screen flicker, and how can I fix it?
Flickering is often caused by a low refresh rate. Set your refresh rate to 85 Hz or higher in your computer's display settings. Lower rates (like 60 Hz) may cause visible flicker.
How do I connect the monitor to my computer?
Use the included VGA cable (D-sub 15-pin) to connect the monitor to your computer's VGA port. Ensure the cable is securely tightened on both ends.
What should I do if the screen is not displaying anything?
Check the power cable and ensure the monitor is turned on. Verify the VGA cable is connected properly. Also check that the computer is outputting a supported resolution. Try pressing the Degauss button if available.
How can I degauss my monitor?
Degaussing removes magnetic interference that causes color issues. Use the Degauss option from the OSD menu or press the dedicated Degauss button if present. The monitor will emit a brief humming sound and the screen will shake; this is normal.
Is the Philips 107B10 Energy Star compliant?
Yes, it is Energy Star compliant. When not in use, the monitor enters low-power modes (Standby and Off) to save energy.
What are the physical dimensions and weight of the monitor?
With the stand, dimensions are approximately 410 mm wide, 420 mm high, and 420 mm deep. The net weight is about 16.5 kg.
Where can I find spare parts or service for my monitor?
Spare parts are limited. Contact Philips support or an authorized service center. Repairs involving internal components should only be performed by qualified technicians to avoid electrical hazards.
User questions about 107B10 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual 107B10 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 107B10 by PHILIPS.