225C5QSB - Monitor PHILIPS - Free user manual and instructions

Product Type	LED Monitor
Screen Size	21.5 inches (54.6 cm)
Resolution	1920 x 1080 (Full HD)
Aspect Ratio	16:9
Panel Type	IPS
Refresh Rate	60 Hz
Response Time	5 ms (Gray to Gray)
Brightness	250 cd/m²
Contrast Ratio	1000:1 (Static)
Viewing Angle	178° (Horizontal/Vertical)
Inputs	VGA, DVI, HDMI
Audio	Built-in speakers (2 x 2W)
Power Consumption	20W (Typical), 0.5W (Standby)
Weight (with stand)	3.5 kg (7.7 lbs)
Dimensions (with stand)	579 x 437 x 228 mm
VESA Mount	100 x 100 mm
Cleaning Instructions	Use a soft dry cloth; avoid chemicals
Safety Feature	Ventilation slots; do not block
Spare Parts	Power cable, VGA cable available
Repairability	Designed for professional repair only

Frequently Asked Questions - 225C5QSB PHILIPS

How do I connect the monitor to my computer?

Connect the VGA or HDMI cable from your computer to the corresponding port on the monitor. Ensure both devices are turned off before connecting.

What is the recommended resolution for this monitor?

The optimal resolution is 1920 x 1080 at 60 Hz. Use the monitor's On-Screen Display (OSD) to adjust if needed.

How do I clean the screen?

Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol, ammonia, or abrasive cleaners. Gently wipe in a circular motion.

Why is there no sound from the built-in speakers?

Ensure the audio cable is connected to the monitor's audio input. Check that the volume is not muted and is turned up in both the monitor OSD and your computer settings.

Can I mount this monitor on a wall?

Yes, the monitor is VESA mount compatible (100 x 100 mm). Use a VESA-compatible wall mount kit and follow the instructions provided with the kit.

How do I adjust the brightness and contrast?

Press the Menu button on the monitor to open the OSD. Navigate to 'Picture' settings to adjust brightness and contrast. Use the arrow buttons to adjust values.

What do I do if the screen flickers?

Check the cable connections and ensure they are tight. Try a different cable or port. Also, verify that the refresh rate is set to 60 Hz in your display settings.

Does this monitor have a blue light filter?

Yes, it includes a LowBlue mode. Access it through the OSD menu under 'Picture' or 'Color' settings to reduce eye strain.

How do I reset the monitor to factory settings?

Press the Menu button, go to 'Setup' or 'OSD Settings', and select 'Reset' or 'Factory Reset'. Confirm the action.

What is the power consumption in standby mode?

The monitor consumes less than 0.5 Watts in standby mode. For full power saving, turn off the monitor or unplug it when not in use.

USER MANUAL 225C5QSB PHILIPS

Modern CRT monitor with abstract purple and orange swirling wallpaper, mounted on a stand (no visible text or symbols)

www.philips.com/welcome

Fl Käyttöopas 1

Waste Electrical and Electronic Equipment - WEEE

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product.

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.

All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials.

Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative.

Taking back/Recycling Information for Customers

Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities.

From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company.

Your display is manufactured with high quality materials and components which can be recycled and reused.

To learn more about our recycling program please visit: http://www.philips.com/sites/philipsglobal/about/sustainability/ourenvironment/productrecyclingservices.page.

2. Nayton asennus

2. Näytön asennus

2.1 Asennus

Symbol of a hand holding a paper airplane within a circle, crossed out by a diagonal line (no text or symbols present)

Isometric line drawing of a rectangular electronic device with a handle and internal components (no text or symbols)

2. Nayton asennus

Malli 225C5QSB, 225C5QSW:

① Vaihtovirta/tasavirtatulo
2 VGA-tulo
3 DVI-D-tulo
4 Kensington-varkaudenestolukko

Malli 225C5QHSB, 225C5QHSW:

Line drawing of a monitor with a stand and a labeled 'PHILIPS' component (no text or symbols on the device itself)

graph TD
    A["∅"] --> B["7"]
    A --> C["6"]
    D["✓"] --> E["5"]
    D --> F["4"]
    G["⊕"] --> H["2"]
    I["∅/OK"] --> J["1"]

Malli 225C5QSB, 225C5QSW:

Malli 225C5QHSB, 225C5QHSW:

Line drawing of a computer monitor with a magnified inset showing a circular icon containing a stylized '回' (no text or symbols on the monitor itself)

1. Kuvan optimointi
   

Color (Väri) -valikko

3. Kuvan optimointi

Color wheel diagram with a grid background and scale bar, no text or symbols present

3. Kuvan optimointi

Options (Valinnat) -valikko

3. Kuvan optimointi

This product is designed for both you and the planet!

TCO Development works for sustainable IT - manufacture, use and recycling of IT products

reflecting environmental, social and economic responsibility.

TCO Certified is a third party verified program, where every product model is tested by an accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for ICT products worldwide.

Some of the Usability features of TCO Certified Displays:

• Visual Ergonomics for image quality is tested to ensure top performance and reduce sight and strain problems. Important parameters are Resolution, Luminance, Contrast, Reflection and Colour characteristics
• Products are tested according to rigorous safety standards at impartial laboratories
  • Electric and magnetic fields emissions as low as normal household background levels
  • Workload ergonomics to ensure a good physical environment

Some of the Environmental features of TCO Certified Displays:

• Production facilities have an Environmental Management System (EMAS or ISO 14001)
- Low energy consumption to minimize climate impact
- Restrictions on Chlorinated and Brominated flame retardants, plasticizers, plastics and heavy metals such as cadmium, mercury and lead (RoHS compliance)
- Both product and product packaging is prepared for recycling
• The brand owner offers take-back options

Corporate Social Responsibility

- The brand owner demonstrates the product is manufactured under working practices that promote good labour relations and working conditions.

The Criteria Document can be downloaded from our web site. The criteria included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user and environmentally friendly direction. Our ICT product labeling system began in 1992 and is now requested by users and ICT-manufacturers all over the world.

For displays with glossy bezels, the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.

For more information, please visit: www.tcodevelopment.com

Technology for you and the planet

(Only for selective models)

6. Saadostietoja

Lead-free Product

Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community's stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.

EPEAT

(www.epeat.net)

The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA.

EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products.

Benefits of EPEAT

Reduce use of primary materials Reduce use of toxic materials

Avoid the disposal of hazardous waste EPEAT'S requirement that all registered products meet ENERGY STAR's energy efficiency specifications, means that these products will consume less energy throughout their life.

CE Declaration of Conformity

This product is in conformity with the following standards

• EN60950-1:2006+A11:2009+A1:2010+A12:2011 (Safety requirement of Information Technology Equipment).
• EN55022:2010(Radio Disturbance requirement of Information Technology Equipment).
  • EN55024:2010 (Immunity requirement of Information Technology Equipment).
  • EN61000-3-2:2006+A1:2009+A2:2009 (Limits for Harmonic Current Emission).
• EN61000-3-3:2008 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable.
  • 2006/95/EC (Low Voltage Directive).
  • 2004/108/EC (EMC Directive).
  • 2009/125/EC (ErP Directive, EC No. 1275/2008 Implementing Directive for Standby and Off mode power consumption)

And is produced by a manufacturing organization on ISO9000 level.

• ISO9241-307:2008 (Ergonomic requirement, Analysis and compliance test methods for electronic visual displays).
• GS EK1-2000:2011 (GS mark requirement).
• prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display).
- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields).
- TCO CERTIFIED (Requirement for Environment Labeling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions.

6. Saadöstietoja

Energy Star Declaration

(www.energystar.gov)

As an ENERGY STAR ^® Partner, we have determined that this product meets the ENERGY STAR ^® guidelines for energy efficiency.

Note

We recommend you switch off the monitor when it is not in use for a long time.

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

FCC Declaration of Conformity

Declaration of Conformity for Products Marked with FCC Logo,

United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Commission Federale de la Communication (FCC Declaration)

EN 55022 Compliance (Czech Republic Only)

This device belongs to category B devices as described in EN 55022, unless it is specifically stated that it is a Class A device on the specification label. The following applies to devices in Class A of EN 55022 (radius of protection up to 30 meters). The user of the device is obliged to take all steps necessary to remove sources of interference to telecommunication or other devices.

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251.

North Europe (Nordic Countries) Information

Placering/Ventilation

WARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÄTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

S∅RG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.

Paikka/llmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTÖ VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.

BSMI Notice (Taiwan Only)

符合乙類資訊產品之標準

The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is the lower the energy it consumes.

On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year.

Note

The EU Energy Label will be ONLY applied on the models bundling with HDMI and TV tuners.

China RoHS

The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products produced and sold for China market have to meet China RoHS request.

Simple diagram with a black rectangle inside a rounded rectangle, no text or symbols present.

Simple geometric diagram with a black rectangle inside a larger rounded square (no text or symbols)

8.4 MHL FAQs