MBP33S-4 - Baby monitor MOTOROLA - Free user manual and instructions

Product Type	Baby Monitor
Brand	Motorola
Model	MBP33S-4
Parent Unit Display	2.8" color LCD
Camera Resolution	VGA (640x480)
Night Vision	Infrared LED, automatic
Two-Way Talk	Yes, built-in microphone and speaker
Temperature Sensor	Yes, displays room temperature
Range (Outdoor)	Up to 300 meters
Power Source (Parent Unit)	Rechargeable Li-ion battery (included) and AC adapter
Power Source (Camera)	AC adapter (included)
Battery Life	Up to 10 hours
Audio Monitoring	VOX mode (voice activated) and continuous
Connectivity	2.4 GHz FHSS wireless
Dimensions (Parent Unit)	12.5 x 7.5 x 3.5 cm
Weight (Parent Unit)	150 g
Dimensions (Camera)	10 x 8 x 6 cm
Weight (Camera)	100 g
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquids.
Safety Compliance	CE, RoHS
Warranty	1 year manufacturer warranty
Included Accessories	Camera, parent unit, 2 AC adapters, user manual

Frequently Asked Questions - MBP33S-4 MOTOROLA

How do I pair the camera with the parent unit?

Press and hold the PAIR button on the camera for 3 seconds. Then go to the parent unit menu and select 'Pair'. The units will sync automatically. If unsuccessful, ensure both are powered on and within close range.

What is the maximum operating range?

The outdoor range is up to 300 meters in open area. Walls and obstacles reduce the range. For best performance, avoid large metal objects and Wi-Fi interference.

How does the night vision work?

The camera has built-in infrared LEDs that automatically activate in low light. The parent unit displays black-and-white image. Ensure no obstacles block the IR lights.

Can I talk to my baby through the monitor?

Yes, press and hold the TALK button on the parent unit to speak. The sound transmits to the camera's speaker. Release to listen again.

How long does the battery last on the parent unit?

The rechargeable battery lasts up to 10 hours under normal use. Battery life varies with screen brightness, VOX settings, and transmission distance.

What do I do if the screen shows 'No Signal'?

First, check that the camera is powered on and within range. Then, try to re-pair the units. If the issue persists, move the camera closer and check for interference from other wireless devices.

How do I adjust the volume and brightness?

Use the + and - buttons on the side of the parent unit to adjust volume. Press the MENU button and select Brightness to adjust screen brightness.

Is the monitor suitable for multiple cameras?

The MBP33S-4 comes with one camera. It may not support additional cameras. Check the user manual for expansion compatibility.

What is VOX mode?

VOX (Voice Activated) mode keeps the parent unit in low-power standby and activates the screen only when the camera detects sound. This saves battery.

How do I clean the devices?

Unplug both units. Use a soft, dry cloth to wipe surfaces. Do not use water, cleaning agents, or abrasive materials. Keep the camera lens clean with a microfiber cloth.

USER MANUAL MBP33S-4 MOTOROLA

Motorola logo featuring a stylized white 'M' inside a black circle with the word 'motorola' below (no additional text or symbols)

MODELS: MBP33S, MBP33S-2, MBP33S-3, MBP33S-4

QUICK START GUIDE

For a full explanation of all features and instructions, please refer to the User's Guide.

1. Setting up your Digital Video Baby Monitor

A. Connecting power supply for the Baby Unit

Illustration of a portable electronic device with cables and a mounted antenna (no text or symbols)

Connect the small plug of the power adapter to the Baby Unit and the other end to the electrical outlet. Only use the enclosed adapter (5V DC/600mA). Ensure the ON/OFF switch is at "ON" position.

B. Installing the battery pack for the Parent Unit

Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment.

C. Fastening the cover for the Parent Unit

Small cross head or Flat end screw driver

D. Connecting power supply for the Parent Unit

Diagram of a connected electrical device with cables and a separate panel (no text or symbols visible)

Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed adapter (5V DC / 600mA). Recommend charging at least 16 hours before first use.

WARNING:

STRANGULATION HAZARD: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away) from the crib. Do not use with an extension cord. Only use the AC Adapters provided.

2. Basic operation of the keys

Parent Unit
	ON/OFF button Press and hold to switch on/off the Unit.
	UP/DOWN buttons Press to adjust menu settings or volume level.
	LEFT/RIGHT buttons	Press to access different menu options or brightness level.
	MENU button Press to open menu options or exit.
OK	OK button Press to confirm a selection.
	VIDEO button Press to turn on/off the LCD display.
	TALK button Press and hold to talk to your baby.
Baby Unit
ON/OFF switch		Push power switch to the right to switch on the Unit. Push power switch to the left to switch off the Unit.

3. General Information

If your product is not working properly...

1. Read this Quick Start Guide or the User's Guide.
2. Contact Customer Service:

US and Canada 1-888-331-3383

Email: [e-mail]

motorola

Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners.

© 2014 Motorola Mobility LLC. All rights reserved.

Printed in China

EN_US Version 7.0