CS85 - Loudspeaker Audac - Free user manual and instructions

Product Type	Built-in Ceiling or Wall Speaker
Brand	Audac
Model	CS85
Nominal Power	40 W
Sensitivity (1W/1m)	94 dB
Maximum SPL (40W/1m)	101.8 dB
Impedance	8 Ohm
Line Transformer Taps	1.5W (6600 Ohm), 3W (3300 Ohm), 6W (1600 Ohm)
Frequency Response	40 Hz - 20 kHz
Dimensions (Diameter x Depth)	275 x 90 mm
Cut-out Diameter	240 mm
Weight	1.4 kg
Mounting Method	4 screws with clamps (spring-loaded)
Color	White (RAL 9010)
Grille Included	Yes, with anti-drop gums
Safety Wire Attachment	Recommended for high mounting
Polarity Wiring	Red: Negative (Common), Black: Positive
Recommended Use	Indoor installation only
Maintenance	Clean with dry cloth
Spare Parts Available	Grille and mounting screws

Frequently Asked Questions - CS85 Audac

What is the required cut-out diameter for the Audac CS85?

The cut-out diameter is 240 mm. You can use the carton from the box as a template.

How should I connect the speaker to the amplifier?

Connect the speaker cable to the socket at the back. Match the impedance by plugging one wire into the common socket (red, negative) and the other into the socket of the desired power tapping (black, positive). Ensure the total rated input of all speakers does not exceed the amplifier's output.

What is the power handling of the Audac CS85?

The nominal power handling is 40 Watts.

Can the Audac CS85 be used outdoors?

No, it is designed for indoor use only. Avoid exposure to solvents, acids, smoke, and heaters to prevent damage.

Does the speaker come with a grille?

Yes, a grille is included. It has gums on the sides to prevent it from falling off.

How do I install the Audac CS85?

Cut a 240 mm hole, insert the speaker, tighten the 4 screws to clamp it, attach a safety wire for high mounting, then place the grille.

What are the line transformer tap settings?

The taps are 1.5W (6600 Ohm), 3W (3300 Ohm), and 6W (1600 Ohm).

What is the frequency response of the CS85?

The frequency response is 40 Hz to 20,000 Hz.

How much does the Audac CS85 weigh?

It weighs 1.4 kg.

Can the CS85 be mounted on a wall?

Yes, it is designed for both ceiling and wall mounting.

USER MANUAL CS85 Audac

PROFESSIONAL AUDIO EQUIPMENT

Built-in Ceiling or Wall Speaker CS85

User Manual & Installation Guid

AUDAC PROFESSIONAL AUDIO EQUIPMENT

User Manual & Installation Guide

© AUDAC

http://www.audac.be

[e-mail]

Before connecting or installing this product, first read these instructions carefully

Warning

• Use only the correct amplifier output voltage and impedance, exceeding these limits could cause fire or other failures.
• Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles.
• Only install the speaker in locations that can structurally support the weight of the speaker. Not doing this may result in the speaker falling down.
• Do not use any other method than specified to mount the speaker. If extreme force is applied to the speaker, it could fall down.
• Attach a safety wire to the speaker when the speaker is mounted high above the ground. Failure in doing so could cause the speaker to fall down for any reason.
• Avoid mounting the speaker in locations exposed to constant vibrations. The mounting points can be damaged by excessive vibrations, potentially causing the speaker to fall down.

Caution

• Avoid electric shocks: switch off the amplifier power when connecting the speaker.
• Avoid installing the speaker in locations exposed to solvents, acids, smoke and heaters, as excessive exposure to these factors could result in speaker failure, fire or electric shock.
• Do not operate the speaker for an extended period of time at distorted sound. This could cause (irreparable) damage to the speaker.
• Do not stand or sit on, nor hang down from the speaker, as this may cause failure of the speaker.

Installation

• Make a hole with a diameter of 240mm. This is very easy when you use the carton that is inside of the box.
  • Take the grille from the speaker and put the speaker in the hole.
• Tighten the screws of the speaker so that the speaker will be clasped on the ceiling or wall.
• Inside of the box, you can find gums. Put these gums on the sides of the grille. Then put the grille on the speaker. The gums on the sides of the grille will prevent the grille from falling down.

Connections

Impedance

- Plug the speaker cable into the socket at the back of the speaker. Make sure to match the impedance. Always plug one cable into the common socket and the other cable into the socket of the desired power tapping.

Cable

- Be sure that you use the following polarities for your speaker cable when using several speakers in the same location.

Red : Negative or common

Black : Positive

- The total rated input of all connected speakers may not exceed the amplifiers output.

Specifications

Nominal Power 40 Watt

SPL (1W/1m) 94 dB

SPL (40W/1m) 101.8 dB

Impedance 8 Ohm

Line transformer impedance 1600 Ohm/6W 3300 Ohm/3W 6600 Ohm/1.5W

Frequency Response 40-20000 Hz

Dimensions (Diameter x Depth) 275x90 mm

Cut-out Diameter 240 mm

Weight 1.4 Kg

Mounting 4 Screws with clamp

Color White RAL9010