KPC-DN6360NU - Surveillance Camera KT&C - Free user manual and instructions

Product Type	Surveillance Camera
Brand	KT&C
Model	KPC-DN6360NU
Resolution	2 Megapixels (1920x1080)
Night Vision	Up to 30m IR range
Lens	2.8mm fixed lens
Field of View	106° horizontal
Power Supply	PoE (IEEE 802.3af) or DC 12V
Power Consumption	Max 5W
Dimensions	160 x 70 x 70 mm
Weight	0.45 kg
IP Rating	IP67 (weatherproof)
Operating Temperature	-30°C to 60°C
Video Compression	H.265 / H.264
Motion Detection	Built-in
Audio Support	1-way audio via built-in microphone
Storage	MicroSD card slot (up to 128GB)
Network	10/100 Mbps Ethernet (RJ45)
Compatibility	ONVIF Profile S
Mounting	Wall or ceiling mount bracket included
Cleaning	Wipe lens with dry soft cloth; use mild soap for housing
Safety	Disconnect power before cleaning; do not disassemble
Spare Parts	Contact KT&C for replacement brackets or cables
Reparability	Limited user-serviceable parts; refer to qualified technician

Frequently Asked Questions - KPC-DN6360NU KT&C

How do I reset the KPC-DN6360NU camera to factory defaults?

Press and hold the reset button on the camera for about 10 seconds until the LED blinks. The camera will reboot with factory settings.

What is the maximum resolution of this camera?

The camera supports up to 1920x1080 at 30 fps.

Does the camera support Power over Ethernet (PoE)?

Yes, the KPC-DN6360NU is PoE compatible (IEEE 802.3af). You can use a PoE switch or injector to power it via the Ethernet cable.

How do I access the camera remotely via mobile app?

Download the KT&C viewing app (e.g., KTC Viewer) from the app store. Add the camera by scanning the QR code on the device and follow the setup wizard.

Can I use a microSD card for local recording?

Yes, the camera has a microSD card slot supporting cards up to 128GB for continuous or event-based recording.

What is the night vision range?

The built-in IR LEDs provide night vision up to 30 meters (98 feet) in complete darkness.

Is the camera weatherproof?

Yes, the camera has an IP67 rating, making it suitable for outdoor use in rain, dust, and extreme temperatures.

How do I clean the camera lens?

Use a dry, soft microfiber cloth to gently wipe the lens. For the housing, a damp cloth with mild soap can be used. Avoid solvents.

The camera is not connecting to the network. What should I check?

Ensure the Ethernet cable is securely connected, the PoE switch is powered, and the camera is within range of your router. Try a different cable or port.

What is the field of view of the lens?

The fixed 2.8mm lens provides a 106° horizontal field of view, ideal for wide-area coverage.

USER MANUAL KPC-DN6360NU KT&C

Two industrial optical cameras with visible lens and control knobs (no text or symbols)

Thank you for choosing our high quality camera. Before attempting to connect or operate, please read and follow these instructions.

CAUTIONS CAUTIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense."

WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Caution - Any changes or modifications in construction of this devies which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CAUTION

1. A regulated DC12V 500mA power supply is recommended for use with this camera for the best picture and the most stable operation. An unregulated power supply can cause damage to the camera. When unregulated power supply is applied, product warranty will be out of subject.
2. It is recommended that the camera is used with a monitor that has a CCTV quality 75 video impedance level. If your monitor is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reflective light, which may cause smear on the picture and possible damage to the CCD 5. Do not remove the serial sticker for the warranty service.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

-

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this product, or their local government office, for details of where and how they can take item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. Household users should contact either the retailer where they for disposal.

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK), NO USER SERVICING TO

NOT REMOVE COVER(OR BACK). QUALIFIED SERVICE PERSONNEL

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instruction in the literature accompanying the appliance.

COMPONENTS

HIGH PERFORMANCE DSP COLOR CAMERA
AUTO IRIS LENS CONNECTION PLUG
C-MOUNT ADAPTOR RING
OPERATION MANUAL

NAME AND FUNCTION

FRONT

C-MOUNT ADAPTOR BING

BACK

①. MENU BUTTON
②. UP BUTTON
③. DOWON BUTTON
④. LEFT BUTTON
⑤. RIGHT BUTTO ®. POWER LED
⑥. POWER LED (The LED will turn on when power is supplied)
⑦ VIDEO OUT JACK (BNC)
(Used to connect an external video monitor)
⑧. POWER TERMINAL
(Used to connect a DC12V power source)
(Options : AC 24V / DC12V)

INSTALLATION

• LENS CONNECTION
Lenses are sold separate. Lenses such as an auto ins lens, CS-Mount lens and C-Mount lens can be used.

When using an auto iris lens

.Please peel off about 8mm of the outer skin of the auto iris lens cable

[Non-Text]

1. Please peel off about 2mm of the outer skin of the insulated conductor inside the lens cable.

1. Please remove the cover of the auto iris lens connection plug and solder the lens cable ti the connector pin in the plug.

*PIN ASSIGNMENT OF THE LENS CONNECTOR

DC auto iris lens Pin 1: DAMP-(CTL-) Pin 2: DAMP+(CLT+) Pin 3: DRV+ Pin 4: DRV-(GND)

1. Please replace the auto iris lens connection plug cover and take off the CCD protection cap and than attach the auto iris lens to the camera by screwing it in clockwise.

2. Please insert the connection plug that is

connected to the auto iris lens cable into the auto lens connector, which is located on the side of the camera

Installation of C-Mount Lens

• MONITOR CONNECTION

* As the connecting method varies with instruments, refer to the
manual supplied with the instrument. * Only connect the cable when the no
* Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.

OSD MANUAL

MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU
LENS	MANUAL
	AUTO	TYPE DC
		MODE	AUTO,OPEN,CLOSE
		SPEED 000 ~ 255
		RETURN
SHUTTER / AGC	AUTO	HIGH LUMINANCE	MODE SHUT,AUTO IRIS, SHUT+AUTO IRIS
			BRIGHTNESS 000 ~ 255
		LOW LUMINANCE	MODE AGC,OFF
			BRIGHTNESS x0.25,x0.50,x0.75,x1.00
		RETURN
	MANUAL	MODE SHUT+AGC
		SHUTTER	1/50(PAL),1/100(NTSC)1/60(NTSC),1/120(PAL)1/250,1/500,1/10001/2000,1/4000,1/10000
		AGC 6,12,18,24,30,36,42,44.8
		RETURN
WHITE BAL	ATW	SPEED	000 ~ 255
		DELAY CNT 000 ~ 255
		ATW FRAME x0.50,x1.30,x1.50,x2.00
		ENVIRONMENT	INDOOR,OUTDOOR
		RETURN
	PUSH
	USER1	B-GAIN 000 ~ 255
		R-GAIN 000 ~ 255
		RETURN
	USER2	B-GAIN	000 ~ 255
		R-GAIN	000 ~ 255
		RETURN
	ANTI CR
	MANUAL	LEVEL	NTSC: 30 ~ 115PAL: 28 ~ 134
		RETURN
	PUSH LOCK
BACK LIGHT	OFF,BLC,HLC
PIC ADJUST	MIRROR	OFF,ON
	BRIGHTNESS	000 ~ 255
	CONTRAST	000 ~ 255
	SHARPNESS	000 ~ 255
	HUE	000 ~ 255
	GAIN	000 ~ 255
	RETURN
ATR	ON	LUMINANCE	LOW,MID,HIGH
		CONTRAST	LOW,MIDLOW,MID,MIDHIGH,HIGH
		RETURN
	OFF
MOTION DET	ON	DETECT SENSE	000 ~ 255
		BLOCK DISP	OFF,ON,ENABLE (CONTROLLER)
		MONITOR AREA	ON,OFF
		AREA SEL	1/4, 2/4, 3/4, 4/4
			TOP	NTSC:000 ~ 244 / PAL: 000 ~ 288
			BOTTOM	NTSC:000 ~ 244 / PAL: 000 ~ 288
			LEFT	NTSC:000 ~ 474 / PAL: 000 ~ 468
			RIGHT	NTSC:000 ~ 474 / PAL: 000 ~ 468
		RETURN
	OFF
NEXT
EXIT
SAVE ALL

*SHUT+IRIS: Both the Shutter and the Mechanical Iris are automatically adjusted according to brightness.
*Auto Iris(Default): The Shutter stays at the manually selected value and only the Mechanical Iris adjusts to brightness.

MAIN MENU	1st Sub MENU	2nd Sub MENU	3rd Sub MENU	4th Sub MENU
PRIVACY	ON	AREA SEL	1/4, 2/4, 3/4, 4/4
			TOP	NTSC:000 ~ 244 / PAL: 000 ~ 288
			BOTTOM	NTSC:000 ~ 244 / PAL: 000 ~ 288
			LEFT NTSC:000 ~ 474 / PAL: 000 ~ 468
			RIGHT	NTSC:000 ~ 474 / PAL: 000 ~ 468
		COLOR	1 ~ 8
		TRANSP	0.00, 0.50, 0.75, 1.00
		MOSAIC	OFF, ON
		RETURN
	OFF
DAY/NIGHT	AUTO	BURST	OFF, ON
		DELAY CNT 0 ~ 255
		DAY > NIGHT	0 ~ 255
		NIGHT > DAY	0 ~ 255
		RETURN
	COLOR
	BW
NR	NR MODE	OFF, Y.C.Y/C
	C LEVEL	000 ~ 015
	Y LEVEL	000 ~ 015
	RETURN
CAMERA ID	ON	EDIT MODE
		RETURN
	OFF
LANGUAGE	ENGLISH, 日本語, DEUTSCH, FRANCAIS, Русский, PORTUGUÊS, ESPAÑOL, 中文
CAMERA RESET
BACK
EXIT
SAVE ALL

*Important Note : - Any changes made to the camera settings must be saved prior to exiting the OSD menu. Else all changes will be discarded. - By changing the lens option in the OSD from MANUAL to AUTO will automatically change the SHUTTER/AGC setting from AUTO IRIS to SHUT+AUTO IRIS.(Default:AUTO IRIS)

SPECIFICATION

Signal Format	NTSC	PAL
Image Device	1/3"SONY EXview HAD CCD II
Scanning System	2 : 1 Interlace
Scanning Frequency	15.734KHz(H), 59.94Hz(V)	15.625KHz(H), 50Hz(V)
Total Pixels	1020(H) X 508(V)	1020(H) X 596(V)
Effective Pixels	976(H) X 494(V)	976(H) X 582(V)
Electronic Shutter	1/60 ~1/100,000sec	1/50 ~1/100,000sec
H.Resolution	750TV Lines
S/N Ratio	More than 50dB(AGC OFF)
Min.Illumination	0.05Lux(Color) / 0.003Lux(BW) (30IRE@F1.4)
Sync System	Internal
Gamma r= 0.45
Video Output Level	1.0 Vp-p Composite(75Ω)
OSD	Built in
BLC	OFF / BLC / HLC
2DNR	OFF / ON (Level adjustable)
ATR	OFF / ON (Level adjustable)
Function	MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
White Balance	ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH-LOCK
Privacy Masking	4 Zones
Motion Detection	4 Zones
Day & Night(ICR)	AUTO / COLOR / BW
Language	ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH / CHINESE
Operating Temperature	14°F~122°F(-10°C~+50°C)

Storage Temperature		-4°F~140°F(-20°C~+60°C)
Humidity		Less than 80%
Dimension		58(W) x 58(H) x 70.5(D)
Power Consumption	DC12V	DC12V(±10%), Max. 110mA
	DUAL	AC24V(±10%), Max. 2.5W DC12V(±10%), Max. 160mA
Lens		MANUAL / DC

Specifications and designs are subject to change for improving the functionality of this product without notice.

DIMENSIONS Unit(mm)