7370APM - Subwoofer GENELEC - Free user manual and instructions
Find the device manual for free 7370APM GENELEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Active Subwoofer |
| Driver Size | 12 inches |
| Amplifier Power | 400 W (Class D) |
| Frequency Response | 19 Hz – 120 Hz (±2 dB) |
| Crossover Frequency | Adjustable 50–120 Hz |
| Maximum SPL | ≥ 110 dB SPL (peak) |
| Input Connectors | XLR (balanced), RCA (unbalanced) |
| Output Connectors | XLR (pass-through) |
| Phase Control | 0°/180° switch |
| Auto Power Off | Yes (adjustable) |
| Protection Features | Overload, short-circuit, thermal |
| Dimensions (H x W x D) | 550 x 462 x 465 mm (21.7 x 18.2 x 18.3 in) |
| Weight | 26 kg (57.3 lb) |
| Mains Voltage | 100–240 V AC, 50/60 Hz |
| Power Consumption | 400 W (max), < 0.5 W standby |
| Placement | Floor or dedicated stand |
| Enclosure Type | Vented (bass reflex) |
| Cabinet Material | Painted MDF with composite baffle |
| Grille | Metal mesh (removable) |
| Intended Use | Studio monitoring, home theater |
| Operating Temperature | 0–35 °C (32–95 °F) |
| Storage Temperature | -30–70 °C (-22–158 °F) |
| Cleaning | Wipe with a damp cloth; avoid solvents |
| Spare Parts & Repairability | Contact Genelec service for parts |
Frequently Asked Questions - 7370APM GENELEC
How do I connect the subwoofer to my studio monitors?
Use balanced XLR cables from your audio interface/subwoofer output to the subwoofer's input, then from the subwoofer's output to your monitors. Ensure the crossover frequency is set appropriately (e.g., 80 Hz).
Where should I place the subwoofer for best bass response?
Place it on the floor, ideally in the front half of the room. Avoid corners to prevent excessive boominess. Use the subwoofer crawl technique to find the optimal position.
How do I adjust the phase?
If the subwoofer and monitors are not in the same horizontal plane, you may need to flip the phase switch to 180° to cancel phase cancellation. Listen to a bass track and toggle to see which setting gives fuller bass.
What crossover frequency should I use?
For typical studio monitors, a crossover around 80 Hz is recommended. Adjust based on your monitors' low-frequency response (e.g., 60–100 Hz).
Can I daisy-chain multiple subwoofers?
Yes, you can connect multiple subwoofers using the XLR pass-through outputs. Ensure all subwoofers are set to the same crossover and phase settings.
How do I enable auto power off?
The subwoofer has an auto power off feature that can be set via a switch on the rear panel. Choose between 'Auto' and 'On' for continuous operation.
What does the overload LED indicate?
The red overload LED indicates that the amplifier is being driven beyond its safe limit. Reduce the volume or input level to prevent distortion and potential damage.
Can I use this subwoofer with home theater systems?
Yes, it works well with home theater receivers via the LFE (RCA) input. Set the receiver's crossover to 80–120 Hz and adjust phase accordingly.
How do I clean the subwoofer?
Wipe the cabinet with a damp, lint-free cloth. Do not use any solvents or abrasive cleaners. The metal grille can be removed and vacuumed gently.
Where can I find spare parts or get repairs?
Contact Genelec customer support or an authorized service center for genuine replacement parts and authorized repairs. Do not attempt to open the unit yourself.
User questions about 7370APM GENELEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual 7370APM - GENELEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7370APM by GENELEC.