7071A - Subwoofer GENELEC - Free user manual and instructions
Find the device manual for free 7071A GENELEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Subwoofer |
| Brand | Genelec |
| Model | 7071A |
| Driver Size | 10 inches (254 mm) |
| Amplifier Power | 250W RMS |
| Frequency Response | 25 Hz – 120 Hz (-3 dB) |
| Crossover Frequency | 80 Hz (adjustable 50-100 Hz) |
| Maximum SPL | 120 dB peak |
| Input Connectors | XLR balanced (female) |
| Output Connectors | XLR balanced (male) for satellite speakers |
| Phase Switch | 0°/180° |
| Level Control | Yes, adjustable |
| Enclosure Type | Sealed enclosure |
| Protection | Limiter circuit, thermal protection |
| Dimensions (H x W x D) | 540 x 480 x 480 mm (approx.) |
| Weight | 33 kg (72.8 lbs) |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | Idle 20W, max 300W |
| Room Response Adjustment | Yes, via rear panel controls |
| Usage | Professional studio monitoring |
| Maintenance | Clean with dry cloth, avoid liquids |
| Safety | Do not expose to rain or moisture; ensure proper ventilation |
Frequently Asked Questions - 7071A GENELEC
How do I connect the Genelec 7071A to my studio monitors?
Connect the XLR output of your audio interface to the input of the subwoofer. Then connect the subwoofer's output to your studio monitors using XLR cables. This allows the subwoofer to filter the low frequencies and send the rest to the monitors.
What is the recommended crossover setting on the 7071A?
The recommended crossover frequency is typically 80 Hz. Adjust according to your monitors' low-frequency extension. For most studio monitors, 80 Hz provides a seamless blend.
How do I adjust the level of the subwoofer?
Use the Level control knob on the rear panel. Start at the minimum setting and gradually increase until the bass blends well with your monitors without being overpowering.
Can I use the 7071A with a home theater system?
Yes, the 7071A can be used in home theater setups if your AV receiver has a subwoofer output. Use a cable adapter (RCA to XLR) if needed, but ensure the signal is line-level.
What is the warranty period for the Genelec 7071A?
Genelec typically offers a 2-year warranty for active speakers and subwoofers. Check your local dealer for specific terms.
How do I clean the 7071A subwoofer?
Use a soft dry cloth to wipe the cabinet. Do not use water, solvents, or abrasive cleaners. Keep the driver and vents free of dust.
Why is there no sound from the subwoofer?
Check power and cable connections. Ensure the level control is not at minimum and the signal source is active. Also verify the crossover settings and that the phase switch is correct.
Can I mount the 7071A on a stand?
The 7071A is designed for floor placement. It does not have mounting points for stands. For optimal performance, place it on a solid floor or a dedicated subwoofer platform.
What is the phase switch on the 7071A used for?
The phase switch (0°/180°) aligns the subwoofer's output with your main monitors. Use the setting that gives the strongest bass at your listening position, typically 0° for most setups.
Is it possible to daisy-chain multiple 7071A subwoofers?
Yes, you can daisy-chain via the XLR outputs. Connect the output of the first sub to the input of the second. However, for consistent bass, consider using a dedicated bass management system.
User questions about 7071A GENELEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual 7071A - GENELEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7071A by GENELEC.