PURO - Air purifier ARGO - Free user manual and instructions

Product Type	Air Purifier
Brand	ARGO
Model	PURO
Dimensions (H x W x D)	450 x 280 x 280 mm
Weight	3.5 kg
Power Supply	220-240 V ~ 50 Hz
Power Consumption	55 W
Noise Level	25 - 50 dB
Coverage Area	Up to 30 m²
Filtration System	Pre-filter, HEPA H13, Activated Carbon
Filter Replacement Indicator	Yes
Airflow Speed Settings	3 speeds + Auto mode
Timer Function	1-8 hours
Ionizer	Yes (can be turned off)
UV-C Light	No
Remote Control	Included
Filter Replacement Frequency	Every 6-12 months
Maintenance	Clean pre-filter every 2 weeks
Safety Features	Overheat protection, tip-over switch
Spare Parts Availability	Filters available from manufacturer

Frequently Asked Questions - PURO ARGO

How often should I replace the filters?

The HEPA and activated carbon filters should be replaced every 6 to 12 months, depending on usage and air quality. The filter replacement indicator will alert you when it's time.

Can I wash the HEPA filter?

No, the HEPA filter is not washable. Only the pre-filter can be cleaned with a vacuum or rinsed with water and dried thoroughly before reinserting.

How do I clean the pre-filter?

Remove the pre-filter and gently vacuum it or wash it under running water. Let it dry completely (at least 24 hours) before placing it back in the purifier.

What does the filter replacement indicator mean?

When the indicator light turns on or flashes, it means the filters have reached the end of their lifespan and need to be replaced to maintain optimal performance.

Can I use the purifier continuously?

Yes, the PURIO air purifier is designed for continuous operation. It is safe to run it 24/7, but we recommend using the timer or auto mode to save energy.

Is the ionizer safe?

Yes, the ionizer is safe and can be turned on or off. It produces negative ions to help capture airborne particles. Ozone emission is within safe limits.

How loud is the purifier?

The noise level ranges from 25 dB on the lowest speed to 50 dB on the highest speed, which is comparable to a quiet conversation or background music.

What is the recommended room size?

The PURIO air purifier is suitable for rooms up to 30 m² (323 sq ft). For best results, place it in the room where you spend the most time.

How do I reset the filter indicator after replacement?

After installing new filters, press and hold the filter reset button (usually on the control panel) for 3-5 seconds until the indicator light goes off.

Where can I buy replacement filters?

Replacement filters are available from the ARGO official website or authorized retailers. Use the model number PURO to find the correct parts.

USER MANUAL PURO ARGO

AIR PURIFIER with electrostatic filter

Exterior view of a white rectangular electronic device labeled 'PUR' with 'argo' logo on top (no additional text or symbols visible)

OPERATING

INSTRUCTIONS

Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damages. Store these instructions.

GENERAL SAFETY INFORMATION

• Only use the air purifier as described in this manual.
• Before plugging in, ensure that the voltage is equal to that specified on the product data plate (AC220-240V/50Hz).
• The purifier must be positioned on a flat, stable surface. To avoid risk of electric shock, short circuit and fire, do not use the appliance if the power cord is damaged or if the electrical socket has worked loose.
• To disconnect the purifier, push the switch to OFF and remove the plug from the socket. When removing the plug, grasp the plug and not the cord. Do not use extensions.
• Do not damage the cord by winding it around sharp corners, twisting it, resting heavy objects on it, positioning it close to hot surfaces or allowing it to hang from the edge of a table.
• Do not make changes to the purifier. If the purifier needs to be repaired or a damaged power cord requires replacement, contact an authorised service centre.
• Before cleaning the purifier or removing the collector, turn the appliance off and unplug.
• Never touch the plug or purifier with wet hands.
• Do not operate the purifier in the presence of mosquito sprays.
• The purifier is not fitted with protection against humidity. As such, only use inside and away from showers, baths and washbasins or similar such places.
• Not suitable for outdoor use.
• Do not immerse in water or other liquids.
• Do not operate near a heater.
• Do not use near flammable gases such as natural gas or propane.
• Do not use near flames, kitchen appliances or heating appliances or, more generally, a hot surface.
• To avoid risk of accidents, keep the purifier away from children and the disabled.
• Do not put fingers and/or any objects in the air inlet/outlet grilles.
• Do not place objects on top of the appliance.
• When not in use for long periods, remove the plug from the socket.
• If rugs are present, the purifier must not be used on the floor. Optimal distance from the floor is 90 cm.
• Do not use the purifier with plugs other than that supplied with the purifier.

1 2 3 4

1. ON/OFF button
2. Air grille
3. Casing
4. Collector extraction point for dust collection

Technical line drawing of a mechanical component with labeled part '8' (no text or symbols beyond label)

1. Removable collector for dust collection

Technical diagram of a vertical air conditioner unit with labeled components and internal structure

1. Power in
2. 12 V plug
3. Power cord

12 11 FAN ON 9 10

1. FAN button
2. ON/OFF button
3. Red LED (purifier on)
4. Green LED (fan on)

HOW TO USE THE PURIFIER

• Insert the power cord into the specific socket at the back of the product.
• Insert the plug into the electrical socket, ensuring the voltage is equal to that specified on the product plate.
• Press the ON/OFF button; the red LED turns on and the purifier begins purifying the air.
• Press the FAN button; the green LED turns on to show that the fan function is enabled. The fan increases the air flow circulating within the appliance and therefore makes filtering even more efficient.

HOW TO CLEAN THE COLLECTOR and THE PURIFIER

Technical line drawing of a mechanical component with no visible text or symbols

1. Unplug before removing the collector. Then remove the collector from the lower end of the product, pulling downwards. Use a soft, clean, damp cloth to clean the collector.

Technical line drawing of a mechanical component with a cylindrical shaft and ribbed internal structure (no text or symbols)

1. Ensure that the collector is completely dry before replacing; follow the direction shown by the arrow.

Do not operate the purifier before having correctly replaced the collector in its compartment.

HOW TO CLEAN THE PURIFIER

Clean the purifier casing with a soft, damp cloth.

Do not use oils, chemical substances or other items to clean that may damage the surface.

Always unplug before cleaning to avoid any risk of electric shock.

The electrostatic filter inside the product does not require any maintenance.

HOW TO STORE THE PURIFIER

If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging, in a cool and dry place.

INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2002/96/EC

When this appliance reaches the end of its useful life, it must not be disposed of together with household waste but must be delivered to appropriate separate waste disposal plants or to dealers that provide similar service. Separate waste disposal of electrical and electronic appliances prevents possible negative effects on the environment and human health resulting from inadequate disposal, and also allows for recovering and recycling the materials comprising the appliances to ensure significant saving in terms of energy and resources. The separate disposal obligation is underlined by the crossed-out dustbin symbol appearing on the product. Illegal disposal of the product by the user shall determine the application of the administrative sanctions defined by the regulations in force.

improve your life

www.argoclima.com

MADE IN CHINA