KCC24SS - Kitchen sink CDA - Free user manual and instructions

Product Type	Kitchen Sink
Brand	CDA
Model	KCC24SS
Material	Stainless Steel
Finish	Satin/Satin Brushed
Installation Type	Undermount
Number of Bowls	1 (Single Bowl)
Overall Dimensions (W x D x H)	24 x 18 x 10 inches
Bowl Dimensions (W x D x H)	22 x 16 x 9 inches
Depth	10 inches
Drain Hole Size	3.5 inches
Number of Faucet Holes	1 (pre-drilled)
Cutout Template Included	Yes
Included Accessories	Mounting clips, drain assembly
Weight	12 lbs
Warranty	Limited Lifetime
Certifications	cUPC, IAPMO
Care Instructions	Clean with mild soap and water; avoid abrasive cleaners

Frequently Asked Questions - KCC24SS CDA

How do I install the CDA KCC24SS kitchen sink?

The sink is designed for undermount installation. Use the included cutout template to mark the countertop, cut the hole, apply silicone sealant, and secure the sink with mounting clips. Detailed instructions are in the manual.

What type of drain is compatible?

The sink has a standard 3.5-inch drain hole. Most kitchen sink drains fit, but we recommend using the included drain assembly for best results.

Can I use this sink with a garbage disposal?

Yes, the single bowl depth and drain size are compatible with standard garbage disposal units. Ensure proper support for the disposal weight.

What is the best way to clean the stainless steel sink?

Use mild dish soap and a soft cloth. Rinse thoroughly and dry to avoid water spots. Avoid harsh chemicals, steel wool, or abrasive pads that can scratch the surface.

Does the sink come with a warranty?

Yes, CDA offers a limited lifetime warranty against manufacturing defects. Keep your receipt and register online for full coverage.

What are the dimensions of the sink bowl?

The single bowl measures approximately 22 inches wide, 16 inches front-to-back, and 9 inches deep.

Is the sink pre-drilled for a faucet?

The sink has one pre-drilled hole for a faucet. If you need more holes, you can drill additional holes using a carbide bit, or choose a deck-mounted faucet.

Can I mount this sink as a drop-in?

The CDA KCC24SS is designed for undermount installation only. For a drop-in installation, consider our top-mount models.

What accessories are included in the box?

The package includes the sink basin, mounting clips, cutout template, drain assembly, and installation screws. Faucet and garbage disposal are sold separately.

How do I remove scratches from the sink?

Light scratches can be buffed with a non-abrasive stainless steel polish or a fine grit pad. For deep scratches, contact CDA customer service.

USER MANUAL KCC24SS CDA

Stainless Steel Sinks

Use and Maintenance

|C|D|A|

Taking Care of your Sink

Your CDA sink is manufactured using material developed specifically to withstand the rigours of everyday kitchen use. However, we advise you to follow these precautions to keep the sink in pristine condition:

• Do not use a plastic washing-up bowl in the sink as grit and other particles may become embedded in the bowl and scratch or erode the sink surface. CDA specifically recommend the use of wire sink-baskets and drainer-racks to help protect your sink. Take care to not cut the plastic coating on these accessories with sharp cutlery or the edges of pans, etc.
• Do not use neat bleach or other harsh cleaning agents on the metal sink waste as this may cause tarnishing. This is especially important if the waste is of the brass/brass finish type.
• Avoid dropping heavy or sharp objects into the sink as they may scratch or damage the surface.
• The surface of the sink can be affected by certain chemicals e.g. neat bleach, nail polish remover, paint stripper, solvents, brush cleaner and insecticides. If any of these substances come into contact with the sink, wipe off immediately with a dry cloth, wash with mild detergent and rinse with water.
• Do not use abrasive liquids, powders or steel pads to clean the sink as they will damage the sink surface and make it more susceptible to staining. The sink may be cleaned with a dilute bleach solution.
• In hard-water areas, a limescale deposit may build up on the sink. The limescale may become stained by coloured foods such as coffee or red wine. If this occurs, we recommend use of a mild limescale remover.
• Particularly stubborn organic stains can be removed effectively by soaking the sink in a biological washing-powder solution, dishwasher powder solution or diluted bleach.
• If the sink comes into contact with acidic materials, rinse immediately with plenty of water and wipe with a soft dry cloth.
• Do not leave rusty objects in contact with the sink. Rust can cause staining, cracking or even permanent damage to the sink surface.
• To avoid staining of the surface do not leave food or other materials with corrosive properties such as juices, salt, vinegar, mustard etc. on the sink for a long time.
• After using the sink, rinse it clean with warm soapy water and rinse with clean water before wiping dry.
  • During installation, protect from scratches, scuffs and other damage.
  • Do not overtighten or strain plumbing fittings.
• The moulding and edges of the sink must be absolutely level so water flows off the drainer.

Important Information about your Sink

Although stainless steel sinks are built to last a lifetime, consumers are almost always concerned about three specific natural occurrences that may appear on their new sink.

Scratching

Stainless steel is NOT scratch resistant and is susceptible to scratching through normal wear. Scratches are most prevalent when the sink is brand new but through continual use, scratches will become more uniform and less apparent over time.

Rust spots

Rust coloured spots which may appear on a new sink do not indicate that the sink itself is rusting. The appearance of these spots is attributed to external factors most commonly related to ferrous particles which come through the water supply following the installation of new pipe work. These particles are not visible to the eye until they start to rust and are likely to appear in the first six to twelve months of use. Cleaning may remove the rust stain but not eliminate the cause. It is however important to avoid the use of steel wool which will exacerbate the problem.

Water staining

Limescale deposits and ‘rainbow’ discolouration which may appear on a stainless steel surface are solely due to environmental factors and not inherent faults within the product. Through continuous use and regular cleaning, these effects will disappear.

You Guarantee is Valid Providing that

• The product has been installed by a suitably qualified person.
• Installation has been carried out in accordance with instructions and current legislation.
• Proof of purchase can be produced.
• The product has been used for domestic purposes only.
- The product has not been tampered with or repair attempted or modified by any unauthorised person.
- All products have been installed in accordance local water by laws and any building regulations in force

You Guarantee does not Cover

• Damage by misuse, neglect or transit.
• Use of parts not used or recommended by CDA.
• Routine maintenance, general wear and tear and installation faults.
• Products used for commercial or professional purposes.

Your sink is guaranteed against defects in materials and/or workmanship for 5 years.

At the discretion of CDA, should a fault arise the sink may be repaired or replaced and agreed refitting may be reimbursed on receipt on a faulty sink/part, once they have been inspected and deemed faulty.