CP7SS - Kitchen sink CDA - Free user manual and instructions

Product Type	Kitchen Sink
Brand	CDA
Model	CP7SS
Material	Stainless Steel
Warranty	5 years against defects in materials and workmanship
Installation Requirements	Must be installed by a suitably qualified person in accordance with instructions and current legislation
Care - General	Rinse with warm soapy water and wipe dry after use
Care - Avoid	Abrasive powders, steel pads, neat bleach, harsh chemicals, plastic washing-up bowls
Care - Stains	Soak in biological washing powder solution or diluted bleach for organic stains
Care - Limescale	Use mild limescale remover in hard water areas
Care - Rust Spots	Clean with mild detergent; avoid steel wool; may appear due to ferrous particles in water supply
Care - Scratches	Stainless steel is not scratch resistant; scratches become less apparent over time
Precautions - Acidic Materials	Rinse immediately with plenty of water
Precautions - Rusty Objects	Do not leave rusty objects in contact with sink
Precautions - Food Residue	Do not leave corrosive materials like juices, salt, vinegar for long
Accessories	Recommended: wire sink-baskets and drainer-racks

Frequently Asked Questions - CP7SS CDA

How should I clean my CDA stainless steel sink?

After use, rinse the sink with warm soapy water and then rinse with clean water before wiping dry. For stubborn organic stains, soak the sink in a biological washing powder solution, dishwasher powder solution, or diluted bleach. Avoid abrasive liquids, powders, or steel pads.

Are scratches normal on a new stainless steel sink?

Yes, stainless steel is not scratch resistant. Scratches are most noticeable when the sink is new, but with continual use, they become more uniform and less apparent over time.

How can I remove limescale deposits?

In hard-water areas, limescale may build up. Use a mild limescale remover to clean it. Limescale can become stained by colored foods like coffee or red wine; in that case, the remover should help.

What causes rust spots on a new sink?

Rust-colored spots are usually caused by ferrous particles from new pipe work that come through the water supply. They are not visible until they rust. Cleaning may remove the stain, but avoid steel wool which worsens the problem.

Can I use bleach or harsh chemicals on the sink?

Avoid neat bleach or harsh cleaning agents on the sink waste as it may cause tarnishing, especially on brass/brass finish types. For the sink surface, you may use a dilute bleach solution, but wipe off any contact with substances like nail polish remover, paint stripper, etc. immediately with a dry cloth.

How can I prevent damage to my sink?

Do not use plastic washing-up bowls as grit may scratch the surface. Use wire sink-baskets and drainer-racks for protection. Avoid dropping heavy or sharp objects, and do not leave rusty objects or corrosive foods (juices, salt, vinegar) on the sink for long.

What is the warranty on the CDA CP7SS sink?

The sink is guaranteed against defects in materials and/or workmanship for 5 years. The warranty is valid if installed by a suitably qualified person, used for domestic purposes only, and not tampered with.

Is the sink scratch resistant?

No, stainless steel is not scratch resistant. It is susceptible to scratching through normal wear, but scratches will become less apparent over time.

How do I remove stubborn organic stains?

Soak the sink in a biological washing powder solution, dishwasher powder solution, or diluted bleach. This is effective for removing organic stains like coffee or red wine.

Can I use a plastic washing-up bowl in the sink?

No, CDA advises against using a plastic washing-up bowl because grit and particles can become embedded and scratch the sink surface. Instead, use wire sink-baskets and drainer-racks.

USER MANUAL CP7SS CDA

Stainless Steel Sinks

Use and Maintenance

|C|D|A|

Taking Care of your Sink

Your CDA sink is manufactured using material developed specifically to withstand the rigours of everyday kitchen use. However, we advise you to follow these precautions to keep the sink in pristine condition:

• Do not use a plastic washing-up bowl in the sink as grit and other particles may become embedded in the bowl and scratch or erode the sink surface. CDA specifically recommend the use of wire sink-baskets and drainer-racks to help protect your sink. Take care to not cut the plastic coating on these accessories with sharp cutlery or the edges of pans, etc.
• Do not use neat bleach or other harsh cleaning agents on the metal sink waste as this may cause tarnishing. This is especially important if the waste is of the brass/brass finish type.
• Avoid dropping heavy or sharp objects into the sink as they may scratch or damage the surface.
• The surface of the sink can be affected by certain chemicals e.g. neat bleach, nail polish remover, paint stripper, solvents, brush cleaner and insecticides. If any of these substances come into contact with the sink, wipe off immediately with a dry cloth, wash with mild detergent and rinse with water.
• Do not use abrasive liquids, powders or steel pads to clean the sink as they will damage the sink surface and make it more susceptible to staining. The sink may be cleaned with a dilute bleach solution.
• In hard-water areas, a limescale deposit may build up on the sink. The limescale may become stained by coloured foods such as coffee or red wine. If this occurs, we recommend use of a mild limescale remover.
• Particularly stubborn organic stains can be removed effectively by soaking the sink in a biological washing-powder solution, dishwasher powder solution or diluted bleach.
• If the sink comes into contact with acidic materials, rinse immediately with plenty of water and wipe with a soft dry cloth.
• Do not leave rusty objects in contact with the sink. Rust can cause staining, cracking or even permanent damage to the sink surface.
• To avoid staining of the surface do not leave food or other materials with corrosive properties such as juices, salt, vinegar, mustard etc. on the sink for a long time.
• After using the sink, rinse it clean with warm soapy water and rinse with clean water before wiping dry.
  • During installation, protect from scratches, scuffs and other damage.
  • Do not overtighten or strain plumbing fittings.
• The moulding and edges of the sink must be absolutely level so water flows off the drainer.

Important Information about your Sink

Although stainless steel sinks are built to last a lifetime, consumers are almost always concerned about three specific natural occurrences that may appear on their new sink.

Scratching

Stainless steel is NOT scratch resistant and is susceptible to scratching through normal wear. Scratches are most prevalent when the sink is brand new but through continual use, scratches will become more uniform and less apparent over time.

Rust spots

Rust coloured spots which may appear on a new sink do not indicate that the sink itself is rusting. The appearance of these spots is attributed to external factors most commonly related to ferrous particles which come through the water supply following the installation of new pipe work. These particles are not visible to the eye until they start to rust and are likely to appear in the first six to twelve months of use. Cleaning may remove the rust stain but not eliminate the cause. It is however important to avoid the use of steel wool which will exacerbate the problem.

Water staining

Limescale deposits and ‘rainbow’ discolouration which may appear on a stainless steel surface are solely due to environmental factors and not inherent faults within the product. Through continuous use and regular cleaning, these effects will disappear.

You Guarantee is Valid Providing that

• The product has been installed by a suitably qualified person.
• Installation has been carried out in accordance with instructions and current legislation.
• Proof of purchase can be produced.
• The product has been used for domestic purposes only.
- The product has not been tampered with or repair attempted or modified by any unauthorised person.
- All products have been installed in accordance local water by laws and any building regulations in force

You Guarantee does not Cover

• Damage by misuse, neglect or transit.
• Use of parts not used or recommended by CDA.
• Routine maintenance, general wear and tear and installation faults.
• Products used for commercial or professional purposes.

Your sink is guaranteed against defects in materials and/or workmanship for 5 years.

At the discretion of CDA, should a fault arise the sink may be repaired or replaced and agreed refitting may be reimbursed on receipt on a faulty sink/part, once they have been inspected and deemed faulty.