VigorPro 5510 - Router Draytek - Free user manual and instructions
Find the device manual for free VigorPro 5510 Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Draytek |
| Model | VigorPro 5510 |
| Product Type | Router |
| Dimensions | 44.5 x 33 x 8.9 cm (17.5 x 13 x 3.5 in) |
| Weight | 6.0 kg (13.2 lbs) |
| Power Supply | AC 100-240V, 50-60Hz |
| WAN Ports | 4 x Gigabit Ethernet (configurable) |
| LAN Ports | 8 x Gigabit Ethernet |
| VPN Support | IPSec, PPTP, L2TP, SSL VPN |
| Firewall Features | SPI, DoS/DDoS protection, content filtering |
| Load Balancing | Outbound and inbound load balancing |
| Wireless (if equipped) | Not applicable (wired model) |
| Management | Web-based, CLI, SNMP, centralized management |
| Maintenance | Keep in dry, dust-free environment; clean with soft cloth |
| Safety | Operate in well-ventilated area; avoid water exposure |
| Spare Parts & Repairability | Contact Draytek support; limited repair options |
| General Information | Firmware upgradeable via web interface |
Frequently Asked Questions - VigorPro 5510 Draytek
How to reset the VigorPro 5510 to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds until the ACT LED blinks rapidly. The router will reboot with factory settings.
What is the default IP address to access the web interface?
The default IP address is 192.168.1.1 with username admin and password admin.
How to configure VLANs on the VigorPro 5510?
Go to LAN >> VLAN Setting in the web interface. Configure VLAN membership for each port. You can assign up to 4094 VLAN IDs.
Can I use the VigorPro 5510 as a VPN server?
Yes, it supports IPSec, PPTP, L2TP, and SSL VPN protocols. Configure under VPN and Remote Access menu.
How to update the firmware?
Download the latest firmware from Draytek website. In the web interface, go to System Maintenance >> Firmware Upgrade, upload the file, and reboot.
What is the maximum throughput for VPN connections?
The VigorPro 5510 can handle up to 500 Mbps IPSec throughput, depending on encryption settings.
How to set up load balancing across multiple WAN connections?
Configure WAN interfaces under WAN >> Internet Access, then enable Load Balancing in the same section. You can set weighting or failover.
Does the VigorPro 5510 support IPv6?
Yes, IPv6 is supported. Enable under LAN >> IPv6 and configure parameters as needed.
How to troubleshoot no internet connection?
Check LED indicators on WAN ports. Verify WAN settings (PPPoE, DHCP, static). Use Diagnostics >> Ping from the router to test connectivity.
Is there a command-line interface available?
Yes, you can access via Telnet (default port 23) or SSH (default port 22). Enable under System Maintenance >> Management.
User questions about VigorPro 5510 Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual VigorPro 5510 - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorPro 5510 by Draytek.