VigorPro 5300VSn - Router Draytek - Free user manual and instructions
Find the device manual for free VigorPro 5300VSn Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multi-WAN VPN Router |
| Dimensions | 220 x 150 x 44 mm |
| Weight | 1.2 kg |
| Power Supply | 12V DC, 2A |
| Power Consumption | 15W (typical) |
| Interfaces | 4x WAN (10/100/1000), 4x LAN (10/100/1000), 2x USB |
| VPN Support | IPSec, PPTP, L2TP, SSL VPN, up to 200 tunnels |
| Firewall Features | Stateful Packet Inspection, DoS/DDoS protection, Content Filtering |
| Wireless | Not built-in |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 0% to 90% non-condensing |
| Certifications | CE, FCC |
| Package Contents | Router, Power Adapter, Quick Start Guide, Ethernet Cable |
| Warranty | 2 years |
| Maintenance and Cleaning | Clean with a dry, soft cloth. Do not use liquids or solvents. |
| Safety | Use only the provided power adapter. Ensure adequate ventilation. Keep away from water. |
| Spare Parts and Repairability | Power adapter available from Draytek. Repairs should be performed by authorized service centers. |
| General Information | Brand: Draytek, Model: VigorPro 5300VSn, Category: Router |
Frequently Asked Questions - VigorPro 5300VSn Draytek
How do I perform a factory reset on the VigorPro 5300VSn?
To factory reset, locate the reset button on the back panel. Use a paperclip to press and hold the button for 10 seconds until the LEDs flash. The router will reboot with default settings. Default IP is 192.168.1.1, username: admin, password: admin.
How do I configure a VPN tunnel?
Log into the web interface (192.168.1.1). Go to VPN and Remote Access > IPSec. Click Add and enter tunnel name, remote gateway, pre-shared key, and local/remote subnets. Apply settings. Ensure firewall rules allow VPN traffic.
How to update firmware?
Download the latest firmware from Draytek's website. In the web interface, go to System Maintenance > Firmware Upgrade. Browse to the downloaded file and click Upgrade. Do not power off during upgrade.
How to set up VLANs?
In the web interface, go to LAN > VLAN. Enable VLAN and create VLAN IDs. Assign ports to VLANs. Configure IP subnets for each VLAN. Apply changes. Ensure inter-VLAN routing is enabled if needed.
What is the default IP and login credentials?
Default IP address is 192.168.1.1. Username: admin, Password: admin. It is recommended to change the password immediately after first login.
How to change the admin password?
Log into the web interface. Go to System Maintenance > Administrator Password. Enter the current password, then new password twice. Click Apply. Write down the new password.
How to enable QoS for prioritizing traffic?
In the web interface, go to Bandwidth Management > QoS. Enable QoS and configure classification rules (e.g., prioritize VoIP or video). Set bandwidth limits for each class. Apply settings.
How to enable the firewall?
The firewall is enabled by default. To customize, go to Firewall > General Settings. Ensure Enable Firewall is checked. You can add rules under Filter Setup to block or allow traffic.
How to troubleshoot 'No Internet' connection?
Check WAN cable connection. Log into router and verify WAN status (IP address received). Ping external IP (8.8.8.8) from router diagnostics. If ping fails, check ISP settings. Ensure DNS is configured. Try rebooting the modem and router.
How to configure multiple WAN connections?
This router supports up to 4 WAN ports. Connect each ISP to WAN ports. In web interface, go to WAN > Internet Access. Configure each WAN interface with appropriate settings (PPPoE, static IP, etc.). Enable load balancing or failover under Load Balancing.
User questions about VigorPro 5300VSn Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual VigorPro 5300VSn - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorPro 5300VSn by Draytek.