ESR150H - Router ENGENIUS - Free user manual and instructions
Find the device manual for free ESR150H ENGENIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | ESR150H |
| Brand | EnGenius |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 150 Mbps |
| Antennas | 2 x 5 dBi external |
| Ports | 4 x 10/100 LAN, 1 x 10/100 WAN |
| Security | WEP, WPA/WPA2-PSK, WPA2-Enterprise |
| Dimensions (W x D x H) | 7.1 x 5.9 x 1.3 inches |
| Weight | 0.5 lbs (225 g) |
| Power Supply | 12V DC, 1A |
| Power Consumption | 10W max |
| Mounting | Wall-mountable with included bracket |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, WAN, LAN, WLAN |
| Reset Button | Yes, recessed |
| Management | Web-based GUI, SNMP |
| Compliance | FCC, CE, RoHS |
| Included Accessories | Power adapter, Ethernet cable, quick start guide |
Frequently Asked Questions - ESR150H ENGENIUS
How do I reset the EnGenius ESR150H to factory defaults?
Press and hold the Reset button (located on the back panel) for at least 10 seconds using a paper clip until the LEDs blink. Release and wait for the router to reboot.
What is the default IP address of the ESR150H?
The default IP address is 192.168.1.1. You can access the web interface by typing this into your browser.
How do I change the Wi-Fi password?
Log into the web interface (192.168.1.1), go to Wireless > Security, enter a new passphrase, and click Apply.
Can the ESR150H be used as a repeater?
Yes, it supports Wireless Distribution System (WDS) mode. Configure WDS in the web interface under Wireless > WDS.
What is the maximum number of connected devices?
The router typically supports up to 32 simultaneous wireless clients, but performance may vary.
How do I update the firmware?
Download the latest firmware from EnGenius support, log into the web interface, go to Management > Firmware, select the file, and click Upgrade.
Is the ESR150H compatible with VPN passthrough?
Yes, it supports PPTP, L2TP, and IPSec passthrough for VPN connections.
What security encryption options are available?
The router supports WEP, WPA-PSK, WPA2-PSK, and WPA2-Enterprise (with RADIUS).
How do I enable guest network?
Go to Wireless > Guest Network in the web interface, enable it, set the SSID and security, then apply.
What should I do if I forget my router login password?
Perform a factory reset using the reset button. This will restore the default username and password (admin/admin).
User questions about ESR150H ENGENIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual ESR150H - ENGENIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESR150H by ENGENIUS.