DOD Chthonic Fuzz - Effect pedal DIGITECH - Free user manual and instructions

USER MANUAL DOD Chthonic Fuzz DIGITECH

Placement of the DOD Chthonic Fuzz:

The Cthonic Fuzz is designed to be first in the chain. This will allow it to interact with the guitar pickups and volume control.

Rolling off the guitar volume just a tiny bit will yield the best results, and rolling it back to 7 or 8 will allow the Chthonic to clean-up to a nice overdrive. Rolling the guitar volume to 5 will yield sparkling clean tones.

This sensitivity also makes the Chthonic react to the capacitance of longer cables, so try to keep the cable to the input to the Chthonic as short as possible. Also avoid having any pedals before the Chthonic as the buffer will affect the tone.

Setup of the DOD Chthonic Fuzz:

Start with all the controls at 12:00, their midpoint. Then adjust to taste. If the result is too extreme, then turn the Fuzz and Lustre controls down to a lower setting.

All settings will be heavily dependent on the output level of your instrument, your amplifier and playing style.

[CHTHONIC FUZZ] RECOMMENDED SETTINGS FOR DIFFERENT PICKUPS

	CLEAN		CRUNCH		LEAD