Festo

SIEN-M12B-PO-S-L - Sensor Festo - Free user manual and instructions

Find the device manual for free SIEN-M12B-PO-S-L Festo in PDF.

📄 2 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Festo SIEN-M12B-PO-S-L - page 1
1 / 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Inductive Proximity Sensor
Model SIEN-M12B-PO-S-L
Brand Festo
Housing Style Threaded barrel, M12 x 1
Dimensions (Diameter x Length) 12 mm x 50 mm (approx.)
Weight Approx. 40 g
Supply Voltage 10 ... 30 VDC
Max. Load Current 200 mA
Output Type PNP, normally open (NO)
Sensing Distance 4 mm (flush mountable)
Switching Frequency Up to 1 kHz
Electrical Connection M12 connector, 4-pin
Protection Class IP67
Ambient Temperature Range -25°C to +70°C
Housing Material Brass, nickel-plated
Active Surface Material PBT
Certification UL Listed (IND. CONT. EQ.)
Safety Warning Not to be used as a safety device
Maintenance No maintenance required; keep surface clean
Cleaning Wipe with dry cloth; do not use solvents
Repair Non-repairable; replace unit if defective
Spare Parts No spare parts available; order new sensor
Manufacturer Festo SE & Co. KG, Esslingen, Germany

Frequently Asked Questions - SIEN-M12B-PO-S-L Festo

What is the operating voltage of the Festo SIEN-M12B-PO-S-L?
The sensor operates on a supply voltage of 10 to 30 VDC.
What is the maximum load current?
The maximum load current is 200 mA.
Can this sensor be used as a safety device?
No, the sensor is not intended for safety-related applications. It must not be used as a safety device.
What is the sensing distance of this sensor?
The typical sensing distance is 4 mm when flush mounted.
What is the output configuration?
The output is PNP normally open (NO).
How do I connect the sensor?
The sensor has an M12 connector (4-pin). Refer to the wiring diagram in the manual for pin assignment.
What is the protection rating?
The sensor is rated IP67, suitable for dusty and wet environments.
How should I clean the sensor?
Clean the surface with a dry, soft cloth. Do not use solvents or abrasive cleaners.
What should I do if the sensor is not working?
Check the supply voltage and wiring. Ensure the sensing distance is not exceeded. If faulty, replace the unit as it is not repairable.
Where can I find the user manual?
The manual is available for free download in PDF format on notice-facile.com.

User questions about SIEN-M12B-PO-S-L Festo

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Sensor in PDF format for free! Find your manual SIEN-M12B-PO-S-L - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SIEN-M12B-PO-S-L by Festo.

USER MANUAL SIEN-M12B-PO-S-L Festo

Festo SIEN-M12B-PO-S-L - 1

10 ... 30 VDC

200 mA max.

Festo SE & Co. KG

Postfach

73726 Esslingen

Ruiter Strasse 82

73734 Esslingen

++49 (0) 711/347-0

Festo SIEN-M12B-PO-S-L - 2

LISTED

IND. CONT. EQ.

11RZ

For use in class 2 circuits

Festo SIEN-M12B-PO-S-L - 3

en Warning, Do not use as a safety device!

Electric voltage! Switch off voltage prior to working on electrics.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Festo

Model : SIEN-M12B-PO-S-L

Category : Sensor