AXSUB-CH5 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXSUB-CH5 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer |
| Size | 12 inches (30.5 cm) |
| Power Handling (RMS) | 500 Watts |
| Power Handling (Peak) | 1000 Watts |
| Impedance | 4 Ohms Dual Voice Coil (DVC) |
| Frequency Response | 20 Hz - 200 Hz |
| Sensitivity | 88 dB @ 1W/1m |
| Mounting Depth | 6.5 inches (16.5 cm) |
| Mounting Diameter | 11.3 inches (28.7 cm) |
| Recommended Enclosure Volume (Sealed) | 1.0 cu. ft. (28.3 liters) |
| Recommended Enclosure Volume (Ported) | 1.5 cu. ft. (42.5 liters) |
| Voice Coil Configuration | Dual 4 Ohm |
| Woofer Cone Material | Injection Molded Polypropylene |
| Surround Material | Rubber |
| Basket Material | Stamped Steel |
| Net Weight | 12.5 lbs (5.7 kg) |
| Terminal Type | Nickel-Plated Push Terminals |
| Overall Dimensions (Diameter x Depth) | 12.5 x 7.2 inches |
| Warranty | 1 Year Limited |
| Compliance | CE, RoHS |
Frequently Asked Questions - AXSUB-CH5 AXESS
What is the power handling of the AXSUB-CH5 subwoofer?
The AXSUB-CH5 handles up to 500 Watts RMS and 1000 Watts peak power. Ensure your amplifier matches these ratings to avoid damage.
What is the impedance configuration?
This subwoofer features dual 4 ohm voice coils, allowing wiring in series (8 ohms) or parallel (2 ohms) for system flexibility.
What enclosure size is recommended?
For best performance, use a sealed enclosure with 1.0 cu. ft. or a ported enclosure with 1.5 cu. ft. of internal airspace.
How do I wire the dual voice coils?
Connect the coils in series for an 8 ohm load: positive of one coil to negative of the other. For parallel (2 ohms): connect both positives and negatives together. Ensure amplifier stability.
What is the mounting depth?
The mounting depth is 6.5 inches. Verify your enclosure or mounting location has sufficient clearance behind the magnet.
Can I use this subwoofer in a home theater system?
While designed for car audio, it can be used at home with a suitable amplifier and enclosure. However, it may not match dedicated home subwoofer performance.
How do I break in the subwoofer?
Play music at low to moderate volume for 10-20 hours to loosen the suspension. Avoid full power until break-in is complete to prevent damage.
What tools are needed for installation?
Basic tools: screwdriver, wire strippers, crimp connectors, multimeter (for impedance check), and mounting hardware. Consider professional installation if unsure.
Is the subwoofer compatible with any amplifier?
Use an amplifier that can deliver 500W RMS at the chosen impedance (2 or 8 ohms). Ensure the amp is stable at low impedance if wiring to 2 ohms.
What is the warranty period?
The subwoofer comes with a 1-year limited warranty against defects in materials and workmanship. Keep your purchase receipt for claims.
User questions about AXSUB-CH5 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXSUB-CH5 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXSUB-CH5 by AXESS.