CDW 55-267 CW - Dishwasher LERAN - Free user manual and instructions

Product Type	Dishwasher
Brand	LERAN
Model	CDW 55-267 CW
Width	60 cm
Height	85 cm
Depth	60 cm
Weight	45 kg
Power Supply	220-240 V, 50 Hz
Power Consumption	1900 W
Energy Class	A+
Water Consumption per Cycle	12 L
Number of Place Settings	12
Noise Level	44 dB(A)
Programs	6 (Eco, Intensive, Normal, Quick, Glass, Rinse)
Features	Electronic control, delay start, salt and rinse aid indicators
Safety	Child lock, anti-flood system
Maintenance	Clean filter regularly, use dishwasher salt and rinse aid
Spare Parts Availability	From authorized service centers

Frequently Asked Questions - CDW 55-267 CW LERAN

How should I install the dishwasher?

Ensure the installation area is level and close to water inlet and drain. Connect the inlet hose to a cold water supply with a 3/4 inch thread. The drain hose must be securely attached to a waste pipe with a minimum height of 40 cm. Electrical connection should be to a grounded socket. Refer to the manual for detailed step-by-step instructions.

What type of detergent should I use?

Use detergent specifically designed for dishwashers, available in powder, gel, or tablet form. We recommend using high-quality detergent for optimal cleaning. Always follow the dosage instructions on the detergent package and adjust based on water hardness.

Why is there water left in the bottom of the dishwasher after a cycle?

A small amount of water may remain in the sump area to keep the seals moist. If there is excessive water, check the filter for blockages, ensure the drain hose is not kinked, and verify the pump is working. You can also run a rinse cycle to clear any debris.

What do the error codes on my LERAN CDW 55-267 CW mean?

Common error codes include: E1 (water inlet issue), E4 (overflow), E8 (heating problem), and E9 (drain error). For specific codes, refer to the manual. In most cases, turning the dishwasher off and on resets the error. If it persists, contact customer support.

How do I clean the filter?

Turn off the dishwasher and remove the lower rack. Rotate the coarse filter counterclockwise and lift it out. Rinse both the coarse and fine filters under running water. Use a soft brush if needed. Reassemble in reverse order. Clean the filter every month or as needed.

Can I put plastic items in the top rack?

Yes, plastic items should be placed on the top rack as it is further from the heating element. Ensure they are dishwasher-safe and not too lightweight to avoid tipping. Avoid placing plastics directly above the lower spray arm.

How do I adjust the water hardness setting?

The LERAN CDW 55-267 CW has a water softener. Refer to the manual to locate the hardness setting (usually via buttons). Measure your water hardness using a test strip (typically in °dH). Set the level accordingly (e.g., level 2 for soft water). This ensures efficient use of salt.

Why are my dishes not drying properly?

Ensure rinse aid is filled and the dispenser is set correctly. Use the extra dry option if available. Open the door slightly after the cycle to let steam escape. Also check that dishes are not overloaded and that the heating element is functional.

How do I reset the dishwasher?

Hold the Start/Reset button for 3-5 seconds until the display shows '0' or the program cancels. Alternatively, turn off the power at the wall socket, wait 1 minute, and turn it back on. This clears most temporary errors.

What is the energy consumption per cycle?

Approximately 1.05 kWh per cycle on the Eco program. Actual consumption depends on the program selected and usage conditions. The dishwasher is rated A+ for energy efficiency.

USER MANUAL CDW 55-267 CW LERAN

graph LR
    A["SALT"] --> B["Inside"]
    B --> C["Outside"]
    C --> D["Washing"]

graph LR
    A["Person mixing shell"] --> B["Salt with salt container"]
    B --> C["Add salt to container"]
    C --> D["Heating salt in container"]
    D --> E["Heating shell with salt"]

Technical line drawing of a kitchen appliance interior with no visible text or symbols

Illustration of a hand pressing down on a device panel with buttons and indicators (no text or symbols)

Illustration of a hand using a tool to press down a device with icons and a star symbol (no text or labels)

Illustration of a hand pressing down on a device with control buttons and a scroll wheel (no text or symbols)

graph LR
    A["Hand pointing to pointing"] --> B["Cher 5 секунд"]
    B --> C["Washing machine with brush drop"]
    C --> D["Water washing machine with brush drop"]
    D --> E["Hand gesture pressing down"]

Line drawing of hands using a tool to clean or wash a cup on a kitchen sink (no text or symbols)

3

Diagram showing a hand holding a tool with arrows indicating motion or force direction (no text or symbols present)

4

Illustration of a hand using a tool to press or install a mechanical component on a flat surface (no text or symbols)

Illustration of hands cleaning a kitchen sink with a tool, no text or symbols present

Line drawing of hands holding a pipe fitting (no text or symbols)

Line drawing of a mechanical valve assembly (no text or symbols)

Technical line drawing of a mechanical assembly with a magnified inset showing a tool inserted into a spring (no text or symbols)