Pyle PPHP1028 - Karaoke

PPHP1028 - Karaoke Pyle - Free user manual and instructions

Find the device manual for free PPHP1028 Pyle in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PPHP1028 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypePortable BT PA and Karaoke Speaker System
BrandPyle
ModelPPHP1028
Speaker ConfigurationDual 10" woofers, 1 x 2" tweeter
RMS Power Output60W
Recommended Power Output240W
Impedance4 Ohm
Bluetooth Version5.0
Wireless Range50 ft
Bluetooth Network NamePYLEUSA
Audio InputsBluetooth, USB, TF card, 3.5mm Aux, 6.5mm Mic, FM Radio
Digital Audio File SupportMP3, WMA, FLAC, WAV, APE
Maximum USB Flash Support64GB
Battery Type12.8V/4000mAh, 51.2Wh Lithium Iron Phosphate
Battery Working Time2-8 hours (varies with volume)
Charging Time6-8 hours
Power Supply110/220V AC
Product Dimensions (L x W x H)13" x 13.2" x 39"
Item Weight28 lbs
Construction MaterialWood, Polypropylene, ABS
Included AccessoriesWireless microphone, power cord, remote control
Special FeaturesDynamic LED lights, mic priority, echo & mic volume controls, recording function, bass/treble controls, extendable handle
ProtectionOvercharge and over-discharge protection
Remote Control BatteriesRequires 2 x AAA (not included)
Microphone BatteriesRequires 2 x AA (not included)

Frequently Asked Questions - PPHP1028 Pyle

How do I pair my phone via Bluetooth?
Press the MODE button on the speaker or remote to select Bluetooth mode. On your device, search for PYLEUSA and connect. A 'Ding' sound confirms successful pairing.
What is the battery life and charging time?
Battery working time is 2-8 hours depending on volume. Full recharge takes 6-8 hours. Use the supplied charging cable and ensure battery switch is ON.
Can I use a wired microphone?
Yes, plug a 6.5mm microphone into the dedicated input. Adjust MIC VOL and ECHO controls for optimal karaoke performance.
How do I use the recording function?
Short press the Recording Button on the control panel to start recording. Short press again to save and play. Press and hold to play saved recordings.
What audio sources can I play through the speaker?
You can stream via Bluetooth, play from USB or TF card (up to 64GB), connect via 3.5mm AUX or 6.5mm mic, or listen to FM radio.
How do I operate the remote control?
The remote requires 2 AAA batteries (not included). Use MODE to switch inputs, Play/Pause, volume +/- , EQ, and number buttons to select songs or FM frequencies.
Can I connect two speakers together?
Yes, press and hold the Play/Pause button for TWS function to pair two compatible Pyle speakers for stereo sound.
What should I do if there is no sound?
Check that the power cord is plugged in, the power switch is ON, and volume is turned up. Ensure audio cables are properly connected and the correct input is selected.
How do I adjust sound settings?
Use the Bass and Treble control knobs on the panel to tailor the sound. Echo and Mic Volume knobs adjust microphone effects.
Is the speaker suitable for outdoor use?
Yes, it is designed for indoor/outdoor use with a rugged molded cabinet and extendable handle. However, avoid wet locations or rain to prevent damage.

User questions about PPHP1028 Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Karaoke in PDF format for free! Find your manual PPHP1028 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PPHP1028 by Pyle.

USER MANUAL PPHP1028 Pyle

Pyle PPHP1028 - 1
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs

Visit Our Website

Pyle PPHP1028 - 2
SCAN ME
PyleUSA.com

PYLE

PyleUSA.com

Pyle PPHP1028 - PyleUSA.com - 1

natural_image Black electronic device with glowing blue and red wave patterns, no visible text or symbols

PPHP1028
Portable BT PA and Karaoke Speaker System

USER GUIDE

READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN THIS OWNER'S MANUAL FOR FUTURE REFERENCE.

Features:

  • Dual 10" High-Performance Speakers
    • Rugged, Molded Cabinet Design
  • Bluetooth for Wireless Streaming
    • 3.5mm Auxiliary Input
    • Mic Priority for Clear Vocals
    • Built-in Rechargeable Battery with LED Indicator
  • Includes Wireless Handheld Microphone
  • Multiple Input Options Including Bluetooth, USB/ TF, 3.5mm Auxiliary Input, 6.5mm Microphone input, and FM Radio
  • User-Friendly Controls for Volume and Playback
    • LED Display for Clear Visibility of Settings
  • 6.5mm Microphone input
    • Dynamic LED Lights Synced with Music
  • Extendable Handle for Easy Transport
  • Echo and Mic Volume Controls for Karaoke
  • Mic Recording Function
    • Bass and Treble Controls
  • Ideal for Parties, Picnics, and Outdoor Events
  • Connects to External Audio Devices
    • Overcharge and Over-Discharge Protection
  • Suitable for Indoor/Outdoor Use

Bluetooth Wireless Streaming:

• Built-in Bluetooth Receiver for Wireless Music Streaming
- Easy and Quick Pairing Setup
- Works with Today's Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Network Name: PYLEUSA
- Bluetooth Version: 5.0
- Wireless Range: 50 ft.

What's in the Box:

  • PA Speaker System
    • (1) Wireless Microphone
  • Power Cord
  • Remote Control

Technical Specs:

  • Construction Material: Wooden+ Polypropylene +ABS
  • Recommended Power Output: 240W
  • RMS Power: 60W
  • Sound System: 10" -inches Woofer x 2 + 2" -inch Tweeter x 1
  • Impedance: 4 Ohm
  • Microphone Battery Operated, Requires AA x 2 Batteries, Not Included
  • USB Interface Type: 2.0
    • Digital Audio File Support: MP3, MWA, FLAC, WAV, APE
    • Maximum USB Flash Support: 64G
  • Remote Control Battery Operated, Requires AAA x 2 Batteries, (Not included).
  • Battery Type: 12.8V/4000mAh, 51.2Wh Lithium Iron Phosphate Battery
  • Battery Working Time: 2-8 hours (Vary with volume)
  • Item Weight: 28 lbs.
    • Power Cord Length: 4.92 ft.
    • Power Supply: 110/220V
  • Product Dimension (L x W x H): 13" x 13.2" x 39" –inches

IC warning

- English:

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.

- French:

California Prop 65 Warning

WARNING:

This product contains "Lead and lead compounds" which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.

For more info go to: www.P65warnings.ca.gov

Pyle PPHP1028 - WARNING: - 1

PRECAUTIONS

To prevent operational problems or serious damage to the speaker unit, please follow these precautions:

  1. Pull out the power cord from the end of the plug. Do not pull the wire.
  2. The speaker should be kept away from other heat sources.
  3. Do not attempt to open the internal speaker unit or change the circuitry as this may cause damage to the unit or an electrical shock.
  4. If you are not going to use the unit for a long period of time, pull out the plug and store it in a cool, dry place.
  5. Ensure the speaker is properly ventilated and kept in a dry location. It is recommended that the speaker be kept about 4 inches away from any wall or object.

WARNING: Do not use this speaker in any wet location, in the rain, or a location with high moisture. Do not place any liquids or other objects on the speaker as this may cause an accidental short.

WIRELESS BLUETOOTH CONNECTION

You can connect your compatible wireless devices such as a cellphone or computer to listen to your audio tracks from this speaker.

  1. Press the MODE button on the speaker or press the MODE button on the remote control to enter wireless mode, indicated on the LED display.
  2. Using the native controls on your device, select the correct signal in your settings to pair, and once successful, you will hear a "Ding" on the speaker.

WIRED MICROPHONE INSTRUCTIONS

  1. Plug in the microphone and turn it on.
  2. Adjust the microphone volume knob (MIC VOL) for proper volume.
  3. Adjust the echo depth to the proper position.
  4. Now you can start using your microphone.

CHARGING THE BATTERY

  1. A full recharge takes 6-8 hours.
  2. Please use the supplied charging cable to charge the speaker.
  3. When using your unit while it is plugged into an external power source, ensure the battery switch is ON.
  4. To protect the lifespan of the built-in battery, be sure to fully charge your unit on the same day the battery runs out. Not charging your unit right away can affect the performance of the battery.

CONTROL PANEL FUNCTIONS

  1. Power Switch
  2. LED Light Switch
  3. 3.5mm AUX Input Jack
  4. Micro SD Slot
  5. USB Port
  6. Display Screen: Battery charging indication on the LED display: flashing while charging, stops flashing when fully charged.
  7. Mode Button: Short press to select BT/FM/AUX/SD/USB mode.
  8. Previous
  9. Play/Pause: Press and hold for TWS function.

  10. Next

  11. Microphone Priority Button

  12. Recording Button: Short press to start recording, and short press again to save and play the recording. Press and hold to play recording files, and press and hold again to quit recording.

  13. AC Power Cable Charging Port

  14. 6.5mm Microphone Input Jack

  15. Master Volume Control

  16. Treble Volume Control Knob

  17. Bass Volume Control Knob

  18. Microphone Echo Control Knob

  19. Microphone Volume Control Knob

  20. Extra DC 12V Input

5 4 USB Micro 3D Memory Card Bins VOLUME 15 VOL 16 MODE 7 8 9 10 11 M.PRI 12 REC 13 AUX 14 MIC R 15 TREBLE 16 BAS8 17 ECNO 18 MIC.VOL 19 POWER LED 88 1 2 A0 INPUT DC12V INPUT 13 20 + - + - - + - + - - PYLE PyleUSA.com

REMOTE CONTROL FUNCTIONS
MODE VOL VOL- E/Q 1 2 3 4 5 6 7 8 9 0 12 PYLE® PyleUSA.com

  1. Power: Used to turn on/off the MP3 player power.
  2. MODE: Used to switch between AUX/USB/BT/Radio.
  3. Mute button
  4. Short press to switch to USB mode. In FM mode, press and hold to automatically search for and save radio stations.
  5. USB/SD mode: Next song / press and hold for fast forward.

FM mode: Short press to select the next saved radio station/press and hold to fast forward frequency to search for a station.

  1. USB/SD mode: Previous song / press and hold for fast backward.

FM mode: Short press to select the previous saved radio station/press and hold for fast backward frequency to search for a station.

  1. EQ solution
  2. Repeat song
  3. Increase volume
  4. Decrease volume
  5. Play/Pause: In FM mode, press to select a saved radio station.
  6. Choose song number directly/In FM mode, choose FM frequency directly.

TROUBLESHOOTING

Fault Possible Cause Solution
No Function Light and/or No Sound1. Electrical cord is not connected.2. Speaker power button is not turned on.3. Volume is not loud enough.1. Insert the plug into an electrical outlet.2. Turn on the power switch.3. Press and hold CH+ to increase the volume.
Function Light ON but No Sound1. Media cables are not connected correctly.2. Audio signal is not transmitted to Speaker.1. Turn off the power, check the input cables to ensure proper audio cables are connected to relevant input plugs.2. Check all audio input signals to the speaker.

If the problem still exists, please refer to the appointed service agent or a professional technician for assistance. Do not attempt to open the speaker cover as this will void the speaker warranty.

FCC INFORMATION

WARNING:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference.

  1. This device must accept any interference received, including interference that may cause undesired operation.

Register Product

Thank you for choosing PyleUSA. By registering your product, you ensure that you receive the full benefits of our exclusive warranty and personalized customer support.

Complete the form to access expert support and to keep your PyleUSA purchase in perfect condition.

Pyle PPHP1028 - Register Product - 1

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PPHP1028

Category : Karaoke