AC-P09MA/W - Air conditioner DEXP - Free user manual and instructions

Product Type	Portable Air Conditioner
Model	AC-P09MA/W
Brand	DEXP
Cooling Capacity	9000 BTU/h (approx.)
Power Supply	220-240V ~ 50Hz
Power Consumption (Cooling)	Approx. 1000W
Refrigerant Type	R410A
Air Flow Rate	Approx. 350 m³/h
Noise Level (Indoor Unit)	Approx. 55 dB(A)
Dimensions (W x D x H)	Approx. 430 x 350 x 680 mm
Net Weight	Approx. 24 kg
Functions	Cooling, Fan, Dehumidification
Control Type	Remote control and manual panel
Timer	Yes, 24-hour timer
Sleep Mode	Yes
Self-Diagnosis	Yes, error code display
Drainage Method	Continuous drainage or bucket for condensation
Installation Type	Window kit for exhaust hose (included)
Filter Type	Washable mesh filter
Filter Cleaning Interval	Every 2 weeks (recommended)
Safety Features	Overheat protection, auto restart
Energy Efficiency Class	A (approx.)
Accessories Included	Remote control, exhaust hose, window sealing kit, manual

Frequently Asked Questions - AC-P09MA/W DEXP

How do I install the exhaust hose for the DEXP AC-P09MA/W?

Attach the hose to the back of the unit and extend it to the window. Use the included window sealing kit to ensure a tight seal. Make sure the hose is not bent or kinked.

How often should I clean the air filter?

Clean the washable mesh filter every 2 weeks under normal usage. More frequent cleaning may be needed in dusty environments.

Why is my air conditioner not cooling properly?

Check if the filter is dirty, the exhaust hose is blocked, or the room is too large for the unit. Also ensure the unit is set to cooling mode.

Do I need to empty the water tank?

In high humidity, the internal tank may fill up. The unit has a continuous drainage option – attach a hose to the drain port. Otherwise, empty the bucket manually when indicated.

Can I use the air conditioner without the exhaust hose?

No. The exhaust hose must be vented to the outside to remove hot air. Using it without the hose will not cool the room and may damage the unit.

What does the error code E1 mean?

Error code E1 usually indicates a sensor malfunction. Turn off the unit, unplug it, wait 5 minutes, and restart. If the error persists, contact a service technician.

How do I use the timer function?

Press the Timer button on the remote or panel. Set the desired time (0-24 hours) using +/- buttons. The unit will start or stop after the set time.

What is the recommended window opening size for installation?

The window kit accommodates vertical or horizontal openings from about 50 cm to 120 cm. Exact dimensions are in the manual.

Can I use an extension cord?

No, using an extension cord is not recommended as it can cause voltage drops or overheating. Plug directly into a grounded wall outlet.

How do I switch between cooling and fan mode?

Press the Mode button on the remote or panel until the desired mode (Cool, Fan, or Dry) is selected.

USER MANUAL AC-P09MA/W DEXP

Technical line drawing of a mechanical device with a 50 cm dimension label (no text or symbols on the device itself)

Комплектация

Diagram showing a mechanical assembly or mounting process with two views of a component, one before and one after (no text or symbols present)

Line drawing of a window with a coiled air tube inserted into the air gap (no text or symbols)

Стационарный монтаж

Three hand-drawn illustrations of pipe fittings with no text or symbols

Подключение дренажа

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.