VP2020 - Router ATEN - Free user manual and instructions
Find the device manual for free VP2020 ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | ATEN |
| Model | VP2020 |
| Dimensions (W x D x H) | 200 x 150 x 30 mm |
| Weight | 0.3 kg |
| Power Supply | 5V DC, 2A |
| Ethernet Ports | 4 x LAN 10/100/1000 Mbps, 1 x WAN |
| Wireless Standards | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Security | WEP, WPA, WPA2, MAC address filtering |
| VPN Support | PPTP, L2TP, IPSec |
| Firewall | SPI firewall, DoS protection |
| DHCP Server | Yes |
| Quality of Service (QoS) | Yes |
| Antenna Type | 2 x external fixed antennas |
| LED Indicators | Power, WAN, LAN, WLAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids or sprays. |
| Safety Precautions | Keep away from water and heat sources. Unplug during lightning storms. |
| Spare Parts & Repairability | No user-serviceable parts inside. Contact authorized service for repairs. |
| General Information | Designed for small office/home office networking. Includes setup wizard and web-based management. |
Frequently Asked Questions - VP2020 ATEN
How do I reset the ATEN VP2020 router to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds until the power LED blinks. Release the button; the router will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1 with username admin and password admin (or blank). Change these immediately for security.
How can I update the firmware on my VP2020?
Download the latest firmware from the ATEN website. Log into the web interface, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Why is my wireless connection dropping frequently?
Possible causes: interference from other devices, outdated firmware, or incorrect channel settings. Try changing the wireless channel or updating the firmware. Also ensure the router is placed away from metal objects and other electronics.
Can I use the VP2020 as a wireless repeater?
Yes, the VP2020 supports WDS (Wireless Distribution System) or repeater mode. Configure it via the web interface under Wireless Settings. Note that performance may be reduced.
How do I configure parental controls on this router?
Log into the web interface, go to Access Control > Parental Control. You can block specific websites or set time limits for devices. Save the settings to apply.
What security protocols are supported?
The router supports WEP, WPA, and WPA2. For best security, use WPA2-AES with a strong passphrase. You can also enable MAC address filtering.
How many devices can connect simultaneously?
The VP2020 can handle up to 32 wireless devices simultaneously. For wired connections, it has 4 LAN ports.
The power LED is not lighting up. What should I do?
Check that the power adapter is securely connected to the router and plugged into a working outlet. Try a different outlet. If the issue persists, the adapter may be faulty; contact ATEN support.
How do I set up a guest network?
Log into the web interface, go to Wireless Settings > Guest Network. Enable it, set a SSID and password, and choose isolation if you want guests to have no access to the main network.
User questions about VP2020 ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual VP2020 - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VP2020 by ATEN.
