EATDG2767CW - Tumble drier Element - Free user manual and instructions
Find the device manual for free EATDG2767CW Element in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Model | EATDG2767CW |
| Brand | Element |
| Load Capacity | 7 kg |
| Drying Technology | Condenser |
| Energy Rating | B |
| Annual Energy Consumption | 504 kWh |
| Noise Level | 65 dB(A) |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 38 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2000 W |
| Number of Drying Programs | 12 |
| Key Programs | Cotton, Synthetics, Delicates, Quick Dry, Wool, Eco |
| Anti-Crease Function | Yes |
| Delay Start | Up to 24 hours |
| Filter Indicator | Yes |
| Water Tank Capacity | 3.5 L |
| Condenser Self-Cleaning | No |
| Drum Material | Stainless Steel |
| Child Lock | Yes |
| Hose Drain Option | Yes |
Frequently Asked Questions - EATDG2767CW Element
How do I clean the lint filter?
Open the dryer door, pull out the lint filter located at the bottom of the opening, remove the lint by hand or with a soft brush, rinse under running water if necessary, dry thoroughly, and reinsert.
What does the 'Clean Condenser' indicator mean?
It reminds you to clean the condenser unit. Open the lower flap, unlock the condenser cover, pull out the condenser, rinse it with a shower head or under running water, drain excess water, and reinsert.
Can I install the dryer in a small room?
Yes, but ensure proper ventilation. The dryer releases warm moist air; if using as a condenser, the water is collected in a tank. Avoid installing in a frost-prone area.
How do I use the delay start function?
Select the desired drying program, press the 'Delay Start' button repeatedly to set the delay time (1-24 hours), then press 'Start/Pause'. The dryer will start after the set delay.
What does 'Anti-Crease' do?
After the drying cycle ends, the drum rotates intermittently for up to 2 hours to prevent creases from forming if you don't unload immediately.
Why is my drying cycle taking too long?
Possible causes: overloaded drum, clogged lint filter, dirty condenser, low room temperature, or fabric type (e.g., heavy cotton). Try reducing load and cleaning filter/condenser.
How do I drain the water tank externally?
You can connect a drain hose (not supplied) to the back of the dryer. Open the drain hose connector cap, attach a hose (inner diameter 15 mm), and route to a floor drain. The water will then drain automatically.
What is the maximum load for different fabrics?
Cotton: 7 kg (full load), Synthetics: 3.5 kg, Delicates: 2 kg, Wool: 1 kg. Overloading reduces drying efficiency and may cause damage.
How often should I clean the condenser?
Clean the condenser every 30 drying cycles or when the 'Clean Condenser' indicator appears. Frequent cleaning maintains drying performance.
Does the dryer have a child lock?
Yes. To activate, press and hold the 'Child Lock' button (usually combined with another button) for 3 seconds. A lock icon appears. Repeat to deactivate.
User questions about EATDG2767CW Element
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual EATDG2767CW - Element and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EATDG2767CW by Element.