PXCLTS-182U - Hedge trimmers Ozito - Free user manual and instructions
Find the device manual for free PXCLTS-182U Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Hedge Trimmer |
| Brand | Ozito |
| Model | PXCLTS-182U |
| Battery Voltage | 18 V |
| Battery Type | Lithium-ion (compatible with Ozito PX series) |
| Blade Length | 55 cm (21.7 in) |
| Blade Material | High-carbon steel, laser-cut |
| Max Cutting Thickness | 20 mm (0.8 in) |
| Tooth Gap | 20 mm |
| No-Load Speed | 2600 spm |
| Weight (without battery) | 2.4 kg (5.3 lbs) |
| Dimensions (L x W x H) | 100 x 22 x 18 cm (39.4 x 8.7 x 7.1 in) |
| Handle Design | Rear wrap-around grip with soft rubber |
| Safety Features | Dual switch operation, blade guard, hand guard |
| Cutting Angle | Rotating rear handle (0° to 90°) |
| Power Source | Battery-powered (battery and charger not included) |
| Recommended Use | Medium to large hedges, shrubs |
| Maintenance | Regular blade cleaning and oiling; replace blade if damaged |
| Warranty | 5 years (subject to conditions) |
| Package Contents | Hedge trimmer, blade cover, user manual |
Frequently Asked Questions - PXCLTS-182U Ozito
What type of battery does the Ozito PXCLTS-182U use?
The Ozito PXCLTS-182U uses an 18V lithium-ion battery from the Ozito Power X Change (PX) range. The battery and charger are sold separately.
Can I use other Ozito batteries with this hedge trimmer?
Yes, any Ozito PX series 18V battery is compatible. Ensure it is fully charged for optimal performance.
What is the maximum cutting thickness?
The hedge trimmer can cut branches up to 20 mm (0.8 inches) in thickness. For thicker branches, use a pruning saw.
How do I change the blade?
First remove the battery. Unscrew the blade retaining bolts (usually 2-3 screws) and carefully lift off the old blade. Install the new blade, ensuring alignment with the drive mechanism, then tighten screws to the specified torque (typically 5-7 Nm). Consult the manual for exact instructions.
Why is the hedge trimmer not cutting properly?
Possible causes: dull blade, low battery, or debris stuck between teeth. Clean the blade, check battery charge, and sharpen the blade if necessary. Avoid cutting branches thicker than recommended.
How should I clean the hedge trimmer after use?
Remove the battery. Clean the blade with a stiff brush and mild soapy water. Dry thoroughly. Apply light oil (e.g., WD-40 or silicone spray) to the blade to prevent rust. Do not immerse in water.
Is the hedge trimmer suitable for left-handed users?
Yes, the rear handle rotates 90° for comfortable use in various positions. The dual-switch safety system requires both hands, but orientation can be adjusted to suit left- or right-handed users.
What safety gear should I wear when using this hedge trimmer?
Always wear safety goggles, gloves, ear protection, and sturdy footwear. Do not wear loose clothing or jewelry. Use the trimmer in dry conditions and never overreach.
Can I use this hedge trimmer for shaping topiaries?
Yes, the lightweight design and rotating handle allow for precise shaping. For fine detail work, consider using the blade guard as a guide. Take small cuts to avoid damaging the plant.
How do I store the hedge trimmer?
Remove the battery and clean the trimmer. Attach the blade guard. Store in a dry, frost-free place out of reach of children. Recharge the battery periodically if not in use for long periods.
User questions about PXCLTS-182U Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hedge trimmers in PDF format for free! Find your manual PXCLTS-182U - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PXCLTS-182U by Ozito.