J166T - Heating Hubbell - Free user manual and instructions
Find the device manual for free J166T Hubbell in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Baseboard Heater |
| Model | J166T |
| Brand | Hubbell |
| Power Consumption | 1500 W (5000 BTU/hr) |
| Voltage | 240 V AC, 60 Hz |
| Current Draw | 6.25 A |
| Heating Element | Sealed steel sheathed |
| Thermostat | Built-in adjustable thermostat |
| Safety Features | Overheat protection, thermal cut-off switch |
| Dimensions (L x H x D) | 36 in x 8 in x 3.5 in (91.4 cm x 20.3 cm x 8.9 cm) |
| Weight | 10 lb (4.5 kg) |
| Installation | Hardwired, wall mounted |
| Finish | Baked enamel, white |
| Recommended Room Size | Up to 150 sq ft (14 sq m) |
| Noise Level | Quiet convection operation |
| Maintenance | Vacuum dust, wipe with damp cloth |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - J166T Hubbell
How do I install the Hubbell J166T heater?
Installation requires hardwiring to a 240V circuit. Turn off power at the breaker, mount the heater on the wall using the provided brackets, connect wires (black to line, white to neutral, green to ground), and secure the cover. Consult a licensed electrician if unsure.
Can I use the J166T with a thermostat?
Yes, the J166T has a built-in adjustable thermostat. You can also connect it to a wall-mounted line-voltage thermostat if desired.
What is the recommended clearance for the heater?
Maintain at least 12 inches (30 cm) clearance in front of the heater and 6 inches (15 cm) from curtains or furniture. Do not block the air intake or outlet.
How do I clean the heater?
Turn off power and allow the heater to cool. Use a vacuum with a brush attachment to remove dust from the fins and interior. Wipe the exterior with a damp cloth. Do not use liquid cleaners inside.
Is the heater safe to leave unattended?
Yes, the J166T includes overheat protection and a thermal cut-off switch. However, always follow general safety guidelines and keep flammable materials away.
Does the heater produce a burning smell when first used?
It is normal for new heaters to emit a slight odor during the first few uses as manufacturing oils burn off. Ensure adequate ventilation. The smell should dissipate after a few hours.
What size room will the J166T heat?
The heater is suitable for rooms up to 150 sq ft (14 sq m) with standard insulation. Actual performance depends on room layout and insulation.
Can I paint the heater?
It is not recommended to paint the heater as paint can affect heat distribution and safety. The factory finish is durable and designed for optimal performance.
How do I adjust the thermostat?
Turn the knob on the heater to the desired temperature setting. A click indicates the heater is activating. Wait a few minutes for the room to reach temperature.
What should I do if the heater stops working?
First, check the circuit breaker. If the heater has overheated, allow it to cool and reset the thermal cut-off by turning the thermostat to off and back on. If it still fails, contact Hubbell customer service.
User questions about J166T Hubbell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual J166T - Hubbell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J166T by Hubbell.