J1636T - Heating Hubbell - Free user manual and instructions
Find the device manual for free J1636T Hubbell in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Industrial Unit Heater |
| Brand | Hubbell |
| Model | J1636T |
| Heating Method | Fan-forced electric |
| Power Source | 240V AC, 1-phase |
| Wattage | 5000 W |
| BTU Output | 17060 BTU/h |
| Airflow Rate | 500 CFM |
| Dimensions (L x W x H) | 24 x 24 x 18 inches |
| Weight | 45 lbs |
| Mounting Type | Wall or ceiling mount |
| Thermostat Control | Built-in adjustable thermostat |
| Safety Features | Overheat protection, tip-over switch, thermal cutoff |
| Housing Material | Steel with powder coat finish |
| Certifications | UL listed, CSA certified |
| Warranty | 1 year limited |
| Maintenance | Periodic cleaning of fan and intake grille |
| Replacement Parts | Available from Hubbell or authorized distributors |
Frequently Asked Questions - J1636T Hubbell
What is the recommended installation height for the J1636T heater?
For optimal heat distribution, mount the heater at least 8 feet above the floor when ceiling-mounted, or 6 feet when wall-mounted. Ensure clearance from obstructions as per the installation manual.
Can the J1636T be used in a bathroom?
This heater is not rated for damp or wet locations. It should be installed in a dry indoor area only, such as workshops, garages, or warehouses.
How do I adjust the thermostat?
The thermostat dial is located on the side of the unit. Turn it clockwise to increase the set temperature. The heater will cycle on and off to maintain the desired ambient temperature.
What is the maximum room size this heater can effectively heat?
With a 5000W output (approx. 17060 BTU/h), the J1636T can heat up to a 500 sq ft area with good insulation. Actual coverage depends on ceiling height and insulation.
Does the heater require a dedicated circuit?
Yes, due to its high power draw (20.8A at 240V), a dedicated 30A circuit with appropriate breaker is recommended. Consult a licensed electrician for installation.
How often should I clean the heater?
Clean the fan blades and intake grille at least every 3 months to prevent dust buildup. Use a soft brush or vacuum. Disconnect power before cleaning.
What should I do if the heater shuts off unexpectedly?
This may indicate overheat protection activated. Let the heater cool for 15 minutes, then check for airflow obstructions. If problem persists, contact customer support.
Is the J1636T suitable for outdoor use?
No, this model is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the unit and void warranty.
Can I mount it horizontally?
The J1636T is designed for vertical or horizontal installation. Follow the mounting bracket instructions to ensure proper orientation and airflow.
Where can I find replacement parts?
Contact Hubbell’s customer service or visit their website for authorized parts dealers. Common replacement parts include thermostat knobs, fan motors, and heating elements.
User questions about J1636T Hubbell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual J1636T - Hubbell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J1636T by Hubbell.