SkyCenter RSC-11S - Home Automation Redmond - Free user manual and instructions

Product Type	Smart Home Hub / Controller
Brand	Redmond
Model	SkyCenter RSC-11S
Dimensions (approx.)	150 x 100 x 30 mm
Weight (approx.)	200 g
Power Supply	5V DC via micro USB (adapter included)
Connectivity	Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth 4.2
Supported Protocols	Zigbee, Z-Wave (optional dongle)
Main Functions	Centralized control of smart devices, scheduling, scene creation, voice assistant integration (Alexa, Google Assistant)
Compatible Devices	Redmond smart devices and selected third-party brands
Mobile App	Redmond Home (iOS & Android)
Voice Control	Works with Amazon Alexa, Google Assistant
Indicators	RGB LED status light (color-coded)
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% non-condensing
Housing Material	ABS plastic
Mounting	Desk stand or wall mount (screws included)
Maintenance	Clean with a soft, dry cloth. Avoid liquids.
Safety	Overcurrent protection, CE certified
Spare Parts / Repairability	Contact Redmond support for replacement power adapter or USB cable. Device is not user-serviceable.
Warranty	2 years

Frequently Asked Questions - SkyCenter RSC-11S Redmond

How do I set up the Redmond SkyCenter RSC-11S?

Download the Redmond Home app from the App Store or Google Play. Plug in the device and wait for the LED to blink. Follow the in-app instructions to connect to your Wi-Fi and add devices.

Which smart devices are compatible with SkyCenter RSC-11S?

The hub works with all Redmond smart home devices and supports many third-party brands via Zigbee and Z-Wave. Check the app's compatibility list for specifics.

Can I use voice control with Amazon Alexa or Google Assistant?

Yes, enable the Redmond Home skill in the Alexa or Google Home app and link your account to control devices by voice.

What does the LED light indicate?

Solid blue: connected to Wi-Fi. Blinking blue: pairing mode. Red: error or no internet. Green: firmware update in progress. See manual for full list.

How do I reset the SkyCenter RSC-11S to factory settings?

Press and hold the reset button (located on the bottom) for 10 seconds using a paperclip until the LED flashes red. Release and the hub will reboot.

My hub won't connect to Wi-Fi. What should I do?

Ensure your router uses 2.4 GHz band (not 5 GHz). Bring the hub closer to the router. Restart both devices and try again. If the issue persists, reset the hub.

Can I control the hub when I'm away from home?

Yes, as long as the hub is connected to the internet, you can control your smart devices remotely via the Redmond Home app.

How often should I update the firmware?

The app will notify you when a new firmware is available. It is recommended to update promptly for security and new features.

Does the hub support matter?

No, the SkyCenter RSC-11S does not support Matter at this time. It uses proprietary Redmond protocol along with Zigbee and Z-Wave.

What is the power consumption of the hub?

The hub consumes less than 5W during normal operation and enters a low-power sleep mode when idle.

USER MANUAL SkyCenter RSC-11S Redmond

RUS

Carefully read all instructions before operating the appliance and save them for future reference. By carefully following these instructions you can considerably prolong the service life of your appliance.

The safety measures and instructions contained in this manual do not cover all possible situations that may arise during the operation of the appliance. When operating the device the user should be guided by common sense, be cautious and attentive.

IMPORTANT SAFEGUARDS

- The manufacturer is not responsible for injuries caused by failure to comply with the safety requirements and operation rules of the appliance.

- This appliance is intended to be used for nonindustrial use in household and similar spheres of application. Industrial application or any other misuse will be regarded as violation of proper service conditions. Should this happen, manufacture is not responsible for possible consequences.

- Before plugging in the appliance ensure that the circuit voltage matches operating voltage of the appliance (see technical specifications or manufacturer's plate on the appliance).

- Unplug the device during a thunderstorm, if it's not used for a long time or when cleaned

- Do not operate the appliance outdoors if water or any foreign object gets into the device housing it may result in serious damage of the appliance.

• Always unplug the device and let it cool down before cleaning. Follow cleaning and general maintenance guidelines when cleaning the unit.

DO NOT immerse the housing in water!

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children without supervision.

- No modifications or adjustments to the product are allowed. All the repair works should be carried out by an authorized service centre. Failure to do so may result in device and property damage or injury.

STOP CAUTION! Do not use the appliance in case of any malfunctions.

Technical Specifications

Model	SkyCenter RSC-115
Voltage	220-240 V, 50 Hz
Power	7 W
Electrical safety	class I
Body material	heat-resistant plastic
Indication	LED
Type of control	electronic remote (Ready for Sky

The appliance is of appropriate quality, in complete set and in full order. I have no claims, and have been acquainted with the warranty service terms and conditions.

Data transmission standard ....Bluetooth v4.0, Wi-Fi Supported operating systems....iOS, Android Protection against rapid voltage change....yes Overall dimensions....90 × 40 × 65 mm Net weight....90 n

Package Includes

Smart control center....1 pc. User manual....1 pc.

The manufacturer reserves the right to make any modifications to design, packaging, or technical specifications of the product without prior notice. The specification allows an error of ±10% .

Parts of the appliance A1

1. Housing

2. Indicator

3. Control button

4. Switch

I. PRIOR TO FIRST USE

Carefully remove the multicooker and its accessories from the packaging. Dispose of all packaging materials.

Keep all warning labels, including the serial number identification label located on the housing.

After transportation or storage at low temperatures allow the appliance to stay at room temperature for at least 2 hours before using.

Before operating, make sure that the device has no dents, cracks or any other visible damages.

II. OPERATION

The smart control center allows you to control household appliances from around the world via the Internet: it will become a bridge between Ready for Sky devices at home and your mobile device.

1. Download the software from the App Store or Google Play (depending on your operating system) onto your smartphone or tablet.

For the minimum supported OS version, see the company's official website www.redmondcompany or the application description at the App Store and Google Play.

1. Start the Ready for Sky app, create an account, and follow the prompts appearing on the screen.

2. Connect the device to the power network

3. Set the switch to the "1" position: the indicator on the device will bank.

4. Select the device to be connected from the device tubing in the application and follow the pop-up tips. When switching to the synchronization mode the indicator will be blinking, it will light up when the synchronization is complete.

This is a single point in the synchronization to complete

1 If the connection isn't made within 30 seconds, the appliance will switch to the standby mode.

To remotely control your devices on the base of the Ready for Sky technology connect them to the smart control centre according to their user manuals.

In order to maintain a stable connection the smart control center remote controller

must be placed no more than 15 meters away if Ensure that your home router supports the I/OP

You can connect several mobile devices to the smart control centre, that means several users can control one and the same device. In this case the device will perform the last received command. To do so, synchronize the second mobile device with the appliance by repeating the step 5.

1. To turn the device off, set the switch to the "0" position, unplug the device.

2. To disable the remote control feature and delete information about previously connected devices, press and hold down the control button for about 10 seconds.

the indicator will blink, go out and then light up again. Release the button, the appliance will switch to the standby mode, the indicator will go out.

(4) Some of the authors do not know, but this is likely to be

III. CLEANING AND MAINTENANCE

Before you start cleaning the appliance, make sure that it is unplugged. Use soft damp cloth or sponge to clean the housing.

DO NOT immerse the housing in water or wash it under running water! Prevent moisture from getting on contact pins or inside the housing.

DO NOT use a sponge or tissue with hard or abrasive surface or abrasive pastes. DO

NUT use any chemically aggressive substances.

Storage and transportation

Store the assembled appliance in a dry, ventilated place away from heating appliances and direct sunlight.

During transportation and storage, do not expose the device to mechanical stress that may lead to damage of the device and/or violation of the package integrity.

Keep the device package away from water and other liquids.

IV. BEFORE CONTACTING SERVICE CENTER

Problem	Possible cause	Solution
The unit does not switch on	Voltage supply/failure	Check the voltage supply
	Electrical outlet is not working properly	Connect to properly working electrical outlet
The attempt of synchronizing has failed	Bluetooth function on the mobile device is disabled	Enable Bluetooth function on the mobile device
	Ready for Sky app on the mobile devices desticated	Run the Ready for Sky appon the mobile device
	Sync devices are too far	Ensure devices are locatedwithin 15 metres from each other

In case you didn't manage to eliminate the defects, please, refer to the authorized service centre.

NOTE! In case any failure occur in the operation of the Ready for Sky app, it is not obligatory to apply to the service centre. Apply to REDMOND technical support service and obtain the consultation of our specialists an error elimination and/or failure in Ready for Sky operation. Your comments and suggestions concerning application operation will be taken into account upon successive update. Contact data of user support service of REDMOND appliances can be found in your country on the website www.redmond.company. You may also obtain the help, filling the contact form provided at the website.

V. PRODUCT WARRANTY

We warrant this product to be free from defects for a period of 12 months from the date of purchase. If the appliance fails to operate properly within the warranty period and is found to be defective in material or workmanship, we will repair or replace it free of charge. This warranty comes into force only in case an original warranty service coupon with a serial article number and an accurate impress of the company of the seller proves the purchase date. This limited warranty does not cover damage caused by the failure to use this product for its normal purpose or in accordance with the instructions on the

proper use and maintenance of the product, or any kind of repair works. Do not try to disassemble the appliance and keep all package contents. This warranty does not cover normal wear of the appliance and its parts.

The service life and the applicable product warranty period start on the date of purchase or the date of manufacture (if the purchase date cannot be established). You can determine the manufacture date by the serial number, located on the identification label on the housing of the appliance. The serial number consists of 13 digits. 6th and 7th digits of the serial number identify the month. 8th digit the year of manufacture

The service life of the product, established by the manufacturer is 3 years from the date of purchase, provided that the unit is used and maintained in accordance with the user manual and applicable technical standards.

Environmentally friendly disposal (Waste Electrical and Electronic Equipment)

The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of electrical and electronic equipment. Do not throw away the electronic waste to help protect the environment.

Old appliances must not be disposed with other household waste but must be collected separately. Municipal disposal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste facility centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are treated as appropriate.

VI. PRODUCT WARRANTY

We warrant this product to be free from defects for a period of 12 months. If the product fails to operate properly within the warranty period and is found to be defective in material or workmanship, we shall either repair or exchange individual parts or the entire product. During the sale make sure that the seller properly filled the warranty card, indicated the device's serial number, date of sale, applied the stamp, as well as put his signature. Check the device for completeness, technical condition, review the terms of warranty and put your signature.

It is not allowed to alter, erase or copy the data indicated in the warranty card.

The warranty will be only VALID if:

1. Consumer submits proof or purchase in the form of user manual, service booklet (or any other documents that may prove the purchase, according to local law), and serial number identification label on the product.

2. Service booklet is provided with corresponding model number and serial number of the product, date of purchase, seller's stamp and signature.

3. Product was used in accordance with the user manual and applicable technical

4. Product was not disassembled, modified, or repaired in any way by any persons, unauthorized to do so by REDMOND; product was not damaged due to improper operation or maintenance.

This warranty is void if the warranty service coupon has been altered, or defaced in any way.

The present warranty is NOT ENFORCABLE if:

1. The product was used other than as intended and described in the product instruction manual.

2. Damages or defects to

- improper installation or connection (including connection to a power source with voltage supply different from the one specified in the user manual and rating plate on the product, or a power source that does not comply with your country's electrical safety standards):

- mechanical or thermal damages caused by misuse (including negligence, improper storage, or transportation) or any accident or injury caused by failure to comply with safety standards;

• damages or modifications to power cord;

- exposure of product parts which are not heat-proof to excessive heat or cold, - damages caused by foreign liquids or bodies, such as insects, rodents, etc.;

- untimely replacement or maintenance of any of the consumable parts and

accessories, requiring periodical cleaning/replacement, - any repairs, modifications, or opening of the product carried out by unauthorized

personnel, resulting in construction, functional, or software change;

- the product was repaired with unauthorised spare parts, connected to, or used with an accessory of improper quality, non-standard characteristics, or not intended for use with the product.

- all other defects arising from failure to follow instructions relating to the product's use.

1. Damages caused by careless or deliberate actions taken by third party.

2. Damages caused by disasters such as fire, flood, lightening, etc.

3. Product's serial number has been removed, erased, defaced, altered, or made

illegible in any way.

This warranty does not cover normal wear and tear of components, mechanisms, and accessories (eg. metal multicooker bowls, non-stick coated bread pans, juicer foam separators, blades, vacuum brushes, gaskets, LED bulbs), consumable parts (dust collectors, removable cartridges and filters, shampoos, and other liquids), replaceable batteries, and accumulators.

The warranty pledge does not apply to periodic maintenance and servicing, if such is required by the user manual.

If you require warranty service, please contact the Help Desk or nearest authorized service centre (refer to the user manual for the list of authorised service centres available). The list of the authorised service centres in your area can also be obtained at www.redmond.company/services.

EAC