Audiopipe

TS-FA100 - Subwoofer Audiopipe - Free user manual and instructions

Find the device manual for free TS-FA100 Audiopipe in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Audiopipe TS-FA100 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Subwoofer
Brand Audiopipe
Model TS-FA100
Size 10 inch
Impedance 4 ohms
RMS Power Handling 100 Watts
Peak Power Handling 200 Watts
Sensitivity 90 dB
Frequency Response 20 Hz - 200 Hz
Mounting Depth 5.5 inches
Mounting Diameter 9.5 inches
Cone Material Non-Resonant Polypropylene
Surround Material High Excursion Rubber
Voice Coil Single 2-layer
Net Weight 10 lbs
Recommended Enclosure Sealed: 0.5-0.8 cu.ft / Ported: 1.0-1.5 cu.ft
Woofer Magnet High-Grade Ferrite
Basket Material Stamped Steel
Terminal Type Push-Button Spring Loaded
Cleaning Wipe gently with a dry microfiber cloth
Safety Do not expose to moisture; disconnect power before installation
Repairability Replaceable voice coil and surround; contact Audiopipe for parts

Frequently Asked Questions - TS-FA100 Audiopipe

What size enclosure is recommended for the TS-FA100 subwoofer?
For a sealed enclosure, use 0.5-0.8 cubic feet. For a ported enclosure, use 1.0-1.5 cubic feet tuned to 35 Hz for optimal bass performance.
How do I wire the TS-FA100 subwoofer to my amplifier?
The subwoofer has a single 4-ohm voice coil. For a 4-ohm load, connect the positive and negative terminals directly to the amplifier. For a 2-ohm load, you would need two subwoofers wired in parallel.
What is the recommended break-in procedure for this subwoofer?
Play music at low to moderate volume (around 50% power) for 10-15 hours. This helps loosen the suspension and improves sound quality and longevity.
Can I use the TS-FA100 in a home theater system?
Yes, but it is designed for car audio. For home use, you will need a compatible amplifier and a suitable enclosure. Ensure the impedance matches your home amplifier.
What type of music is best for this subwoofer?
The TS-FA100 is versatile and handles rock, hip-hop, and electronic music well. Its frequency response down to 20 Hz provides deep bass for most genres.
How do I clean the subwoofer cone?
Use a dry microfiber cloth to gently wipe the cone. Avoid any liquids or chemicals, as they may damage the cone material.
What is the maximum power this subwoofer can handle?
The RMS power rating is 100 watts, with a peak handling of 200 watts. Exceeding these limits may cause distortion or damage.
Does this subwoofer come with a grille?
No, the TS-FA100 is sold as a bare subwoofer. You can purchase a separate grille for protection if needed.
Can I mount the subwoofer upside down?
Yes, as long as the bass sound is not obstructed. However, ensure the cone movement is not limited and the subwoofer is securely mounted.
What is the warranty period for the Audiopipe TS-FA100?
Audiopipe typically offers a 1-year warranty against defects. Register your product on their website for support. Keep your proof of purchase.

User questions about TS-FA100 Audiopipe

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Subwoofer in PDF format for free! Find your manual TS-FA100 - Audiopipe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-FA100 by Audiopipe.

USER MANUAL TS-FA100 Audiopipe

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Audiopipe

Model : TS-FA100

Category : Subwoofer