Machete Lite M10 D2 - Subwoofer Deaf Bonce - Free user manual and instructions
Find the device manual for free Machete Lite M10 D2 Deaf Bonce in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Deaf Bonce |
| Model | Machete Lite M10 D2 |
| Size | 10 inches |
| Impedance | Dual 2 Ohm |
| RMS Power Handling | 800 W |
| Peak Power Handling | 1600 W |
| Sensitivity | 85 dB (1W/1m) |
| Frequency Response | 30 - 500 Hz |
| Mounting Depth | 6.5 inches |
| Mounting Hole Diameter | 9.25 inches |
| Voice Coil | Dual 2 Ohm |
| Recommended Enclosure | Sealed: 1.0 - 1.5 cu.ft; Ported: 1.5 - 2.0 cu.ft |
| Magnet Material | High-grade ferrite |
| Cone Material | Pressed paper with non-pressed surround |
| Surround Material | Foam |
| Overall Diameter | 10.2 inches |
| Weight | 12.5 lbs |
| Maintenance | Wipe with a dry cloth; avoid moisture and direct sunlight |
| Safety | Keep away from children; use within rated power to avoid damage |
| Warranty | 1 year limited |
Frequently Asked Questions - Machete Lite M10 D2 Deaf Bonce
How do I wire a dual 2 ohm subwoofer for a 1 ohm or 4 ohm load?
To achieve a 1 ohm load, connect the two voice coils in parallel (positive to positive, negative to negative, then to amp). For a 4 ohm load, connect them in series (positive of first to negative of second, remaining terminals to amp).
What is the recommended enclosure size for this subwoofer?
For a sealed enclosure, use 1.0 - 1.5 cubic feet. For a ported enclosure, use 1.5 - 2.0 cubic feet with a tuning frequency around 35 Hz. Always match the manufacturer's specifications for optimal performance.
Do I need to break in the subwoofer?
Yes, a break-in period of 10-20 hours at moderate volume is recommended to loosen the suspension and improve sound quality and low-frequency extension. Avoid full power during break-in.
What is the RMS power handling of the Machete Lite M10 D2?
The subwoofer is rated for 800 watts RMS and 1600 watts peak. Ensure your amplifier provides clean power within this range to prevent damage.
Can I use this subwoofer with a mono amplifier?
Yes, a mono amplifier is ideal. The dual 2 ohm voice coils allow wiring to 1 ohm (parallel) or 4 ohms (series), making it compatible with most mono amps. Check your amp's stability at the desired load.
What impedance do the voice coils have?
This subwoofer has dual 2 ohm voice coils, meaning each coil is 2 ohms. You can wire them in series (4 ohms total) or parallel (1 ohm total).
How do I properly set the gain on my amplifier?
Set the gain using a digital multimeter or oscilloscope to match the amplifier's output voltage to the subwoofer's RMS rating. Alternatively, use a test tone at a frequency like 50 Hz and adjust by ear until distortion is heard, then back off slightly.
What is the frequency response of this subwoofer?
The frequency response is 30 Hz to 500 Hz. It reproduces deep bass notes effectively, especially in a properly designed enclosure.
Is this subwoofer designed for car audio or home use?
This is a car audio subwoofer optimized for 12V systems. It can be used in home theater with a suitable amplifier and power supply, but it is primarily intended for vehicles.
How should I clean and maintain the subwoofer?
Clean the cone and surround with a soft, dry cloth. Avoid liquids, abrasives, or solvents. Do not expose to moisture or direct sunlight. Check mounting bolts periodically to ensure they are tight.
User questions about Machete Lite M10 D2 Deaf Bonce
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Machete Lite M10 D2 - Deaf Bonce and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Machete Lite M10 D2 by Deaf Bonce.