FlexClip Go - Microphone RODE - Free user manual and instructions

Product Type	Clip-on Lavalier Microphone
Brand	Rode
Model	FlexClip Go
Polar Pattern	Omnidirectional
Cable Length	1.2 m (approx.)
Weight	12 g (approx.)
Power Source	Plug-in power from device (requires TRRS jack)
Frequency Response	20 Hz - 20 kHz
Signal-to-Noise Ratio	67 dB (typical)
Compatibility	Smartphones, tablets, cameras with TRRS input
Clip Material	Plastic with spring-loaded clip
Cable Jack	3.5 mm TRRS
Accessories Included	Windscreen, cable clip, pouch
Maintenance	Wipe with dry, soft cloth; avoid moisture
Safety Precautions	Do not expose to liquids; keep away from magnets
Spare Parts	Windscreen and cable clips replaceable
Repairability	Not user-serviceable; contact Rode support
Warranty	1 year limited warranty
General Information	Designed for clear vocal capture in video and podcasting

Frequently Asked Questions - FlexClip Go RODE

How do I connect the FlexClip Go to my smartphone?

Plug the 3.5mm TRRS jack into the headphone/mic port on your smartphone. Ensure the mic is securely clipped near your mouth.

Is the FlexClip Go compatible with my camera?

Yes, if your camera has a 3.5mm TRRS input. For TRS-only cameras, you may need an adapter.

How do I attach the included windscreen?

Slide the foam windscreen over the microphone capsule. It reduces wind noise and plosives.

Can I wash the windscreen?

Yes, gently wash with mild soap and water, then air dry completely before reattaching.

What should I do if the audio is low?

Check that the mic is properly inserted into the device and that volume settings are turned up. Also ensure the cable is not damaged.

How do I clean the microphone?

Use a soft dry cloth to wipe the body. Avoid getting moisture into the grille.

Does the FlexClip Go require batteries?

No, it is powered by the connected device (plug-in power). No batteries needed.

Can I replace the cable?

The cable is fixed and not user-replaceable. If damaged, contact Rode support for repair options.

Is the FlexClip Go waterproof?

No, it is not waterproof. Keep it away from moisture and liquids to avoid damage.

What is the warranty period?

Rode offers a 1-year limited warranty from the date of purchase. Keep your receipt.

USER MANUAL FlexClip Go RODE

Three black plastic clipers with metal contacts and circular symbols, arranged in a row (no text or labels visible)

The FlexClip GO is a set of three clips for the Wireless GO and Wireless GO II that allow for maximum versatility when mounting a transmitter onto talent and other objects. It includes the MagClip GO, CrossClip and Vampire Clip.

Includes:

• MagClip GO for easy mounting of the transmitter onto clothing or magnetic surfaces
• CrossClip allows the transmitter to be discreetly mounted vertically in either orientation
• VampireClip can be used to attach the transmitter to clothing or fabric using the integrated double-tooth pin

MAGCLIP GO Clip

MAGCLIP GO Magnet

Woman in green blazer and white top holding a small object, looking closed with closed eyes (no visible text or symbols)

MECHANICAL SPECIFICATIONS

MAGCLIP GO

Weight (grams): 14

Dimensions

(millimetres):

Clip

Width: 55

Height: 21.5

Depth: 5

Magnet

Width: 27.5

Height: 18.5

Depth: 4

CROSSCLIP

Weight (grams): 4

Dimensions

(millimetres):

Width: 35.5

Height: 41.5

Depth: 5.5

VAMPIRECLIP

Weight (grams): 6

Dimensions

(millimetres):

Width: 35

Height: 20

Depth: 7

CROSSCLIP

VAMPIRECLIP

Man in light blue suit and pink tie examining a small object (no visible text or symbols)

MECHANICAL SPECIFICATIONS

MAGCLIP GO

Weight (grams): 14

Dimensions

(millimetres):

Clip

Width: 55

Height: 21.5

Depth: 5

Magnet

Width: 27.5

Height: 18.5

Depth: 4

CROSSCLIP

Weight (grams): 4

Dimensions

(millimetres):

Width: 35.5

Height: 41.5

Depth: 5.5

VAMPIRECLIP

Weight (grams): 6

Dimensions

(millimetres):

Width: 35

Height: 20

Depth: 7