NT1000 - Microphone RODE - Free user manual and instructions
Find the device manual for free NT1000 RODE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Large-Diaphragm Condenser Microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | -36 dB re 1 V/Pa |
| Output Impedance | 200 ohms |
| Maximum SPL | 140 dB SPL |
| Equivalent Noise | 12 dBA |
| Power Requirements | 48V Phantom Power |
| Connector | 3-Pin XLR |
| Dimensions (Length x Diameter) | 214 mm x 50 mm |
| Weight | 648 g |
| Material | Brass with Nickel Finish |
| Included Accessories | Shock Mount, Pouch, Windscreen |
| Self-Noise | 12 dBA |
| Dynamic Range | 128 dB |
| Signal-to-Noise Ratio | 82 dB |
| Humidity | Operating: 0-95% non-condensing |
| Temperature Range | Operating: -20°C to 60°C |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Safety | Use phantom power only; keep away from moisture |
| Spare Parts | Available through Rode authorized service centers |
Frequently Asked Questions - NT1000 RODE
What power does the NT1000 require?
The Rode NT1000 requires 48V phantom power to operate. It will not work without it.
Does the NT1000 come with a shock mount?
Yes, the NT1000 includes a shock mount designed to reduce vibrations and handling noise.
What type of cable does the NT1000 use?
It uses a standard 3-pin XLR cable for balanced audio output.
Is the NT1000 good for vocals?
Yes, its cardioid polar pattern and warm sound make it excellent for vocal recording in studios.
Can I use the NT1000 for instruments?
Absolutely. It works well on acoustic guitars, piano, and as an overhead mic for drums.
How do I clean the NT1000?
Wipe the exterior with a soft dry cloth. Avoid liquids or cleaners on the capsule.
What is the frequency response of the NT1000?
The frequency response is 20 Hz to 20 kHz, with a slight presence boost for clarity.
How heavy is the NT1000?
It weighs approximately 648 grams, which is standard for a large-diaphragm condenser mic.
Where is the NT1000 made?
Rode microphones are designed and manufactured in Australia.
What accessories are included?
The package includes the microphone, shock mount, protective pouch, and windscreen.
User questions about NT1000 RODE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual NT1000 - RODE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NT1000 by RODE.