Steel Pro 10473 - Above-ground pool BESTWAY - Free user manual and instructions
Find the device manual for free Steel Pro 10473 BESTWAY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Above-Ground Pool |
| Brand | Bestway |
| Model | Steel Pro 10473 |
| Shape | Round |
| Diameter | 8 ft (2.44 m) |
| Height | 30 in (76 cm) |
| Water Capacity (90% full) | Approx. 1,124 L (297 gal) |
| Frame Material | Steel with rust-resistant coating |
| Liner Material | PVC with 3-ply reinforcement |
| Filter Pump Included | No (requires separate purchase) |
| Recommended Pump | Bestway 530-636 gal/hr filter pump |
| Assembly Required | Yes |
| Tool Required | Screwdriver (not included) |
| Maximum Number of Users | 3 persons |
| Surface Preparation | Flat, level ground; protective ground cloth recommended |
| Winter Use | Not recommended; must be disassembled and stored |
| Repair Kit Available | Yes (Bestway patch kit) |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Steel Pro 10473 BESTWAY
How do I set up the Bestway Steel Pro 10473 pool?
First, choose a flat, level surface free of rocks and debris. Lay out the ground cloth, then unroll the pool liner. Assemble the steel frame by connecting the uprights and top rails. Attach the liner to the frame using the provided clips. Fill with water slowly, smoothing out wrinkles as the pool fills. Refer to the manual for detailed steps.
What tools are needed for assembly?
You will need a screwdriver (Phillips head) to tighten screws on the frame. No other specialized tools are required. All hardware is included.
Can I set up the pool on uneven ground?
No, the ground must be flat and level to prevent structural stress and uneven water distribution. Use a spirit level and if necessary, dig out high spots or fill low spots. Never place the pool on a slope.
How do I clean the pool water?
Use a filter pump (sold separately) to circulate and filter the water. Add chlorine tablets or granules to disinfect. Test water pH regularly (ideal pH 7.2-7.6). Skim debris daily and vacuum the pool floor weekly.
How should I store the pool in winter?
Drain the pool completely, disassemble the frame, and clean the liner. Allow all parts to dry thoroughly to prevent mold. Store the liner and frame in a dry, temperature-controlled area away from sunlight and rodents.
What chemicals are safe to use with this pool?
Use chemicals specifically designed for above-ground pools: chlorine tablets or granules, pH increaser or decreaser, algaecide, and clarifier. Always follow the manufacturer's dosage instructions. Never mix chemicals directly.
Does the pool come with a filter pump?
No, the Bestway Steel Pro 10473 does not include a filter pump. It is recommended to purchase a pump with a flow rate of 530-636 gallons per hour, such as the Bestway 58095 or similar.
How do I repair a leak or tear in the liner?
Use a PVC patch kit (sold separately). Clean and dry the area around the tear, apply adhesive, and press the patch firmly. For small punctures, a vinyl repair tape can also be used. Allow 24 hours before refilling.
How many people can use the pool at once?
The maximum capacity is 3 persons depending on age and size. Do not exceed the maximum fill line to avoid damage. Children should always be supervised.
How long does assembly take?
Assembly typically takes 60-90 minutes for two people. The hardest part is leveling the ground. Once the ground is prepared, the frame and liner can be set up quickly.
User questions about Steel Pro 10473 BESTWAY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Above-ground pool in PDF format for free! Find your manual Steel Pro 10473 - BESTWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Steel Pro 10473 by BESTWAY.