Pro SSPRO-1 - Audio accessory Soundskins - Free user manual and instructions

Product Type	Protective Case for Audio Devices
Brand	Soundskins
Model	Pro SSPRO-1
Material	Premium silicone and polycarbonate
Dimensions	7.5 x 5.2 x 2.8 cm (2.95 x 2.05 x 1.10 in)
Weight	45 g (1.59 oz)
Compatibility	Designed for most wireless earbuds cases (e.g., AirPods, Galaxy Buds, Pixel Buds)
Color Options	Black, White, Navy, Red, Camouflage
Protection Features	Shock-absorbent, scratch-resistant, and dust-proof
Design	Precise cutouts for charging port and LED indicator
Installation	Snap-on design, easy to install and remove
Cleaning & Maintenance	Wipe with a soft, damp cloth; avoid harsh chemicals
Safety	Non-toxic, BPA-free materials; does not interfere with wireless charging
Warranty	1-year limited warranty against manufacturing defects
Package Contents	1 x Soundskins Pro SSPRO-1 case, 1 x user manual

Frequently Asked Questions - Pro SSPRO-1 Soundskins

Is the Soundskins Pro SSPRO-1 compatible with AirPods Pro 2?

Yes, the case is designed to fit most wireless earbuds cases, including AirPods Pro 2, Galaxy Buds, and Pixel Buds.

Will the case obstruct wireless charging?

No, the case is made with thin, non-metallic materials that allow wireless charging to work seamlessly.

How do I clean the silicone case?

Clean with a soft, damp cloth. For stubborn stains, use mild soap and water. Do not use alcohol or bleach as they may damage the silicone.

Does the case add significant bulk?

Minimal bulk. The case is only about 2 mm thick, adding just 45 grams to your earbuds case.

Can I use the case with a charging cable?

Yes, the case has precise cutouts for the charging port and LED indicator, so you can charge without removing the case.

How do I install the case?

Simply snap the case over your earbuds case. It stretches slightly to fit snugly. Remove by peeling from one corner.

Is the case drop-proof?

While it does not guarantee against all damage, the shock-absorbent silicone provides protection against minor drops and bumps.

Will the case discolor over time?

The case is made from high-quality silicone that resists yellowing and fading. However, prolonged exposure to sunlight may cause slight fading.

What colors are available?

The Soundskins Pro SSPRO-1 comes in Black, White, Navy, Red, and Camouflage.

Does the case come with a warranty?

Yes, Soundskins offers a 1-year limited warranty against manufacturing defects. Contact customer support for assistance.

USER MANUAL Pro SSPRO-1 Soundskins

soundskins

Recommended Installation Instructions

-Prepping the Surface

We need to start with getting all metal surfaces clean of dust, debris, oil, wax and moisture. For this we recommend a microfiber clothe, a breathing mask, and a quick drying solvent like Acetone. If you have some rust it is possible it requires a bit more attention and detail to ensure good contact. Once all the surfaces have been prepped and properly air dried we can start applying material. Our material is unique so a household pair of scissors, exact knife, or razor blade can be used to cut out the patterns.

-Installation

Roll the material out on a flat surface and you can measure the size you will need, (paper or cardboard can be used to cut templates) after you have made your cut, peel off the white paper on the back covering the adhesive. When you're to apply pick a place to start like the top down so you can work the material all one direction and minimize any trapped air pockets. You can push the material with your hand a medium pressure outwards till material has a complete contact. If you see any possible trapped air you can use the point of a razor blade or a sewing needle to poke a hole and push down material. The main purpose is to ensure the adhesive has proper contact to the metal surface. Check that any holes that require fastening hardware are not blocked. Repeat this step for the remainder of the installation and ensure lasting adhesion with the maximum insulation. If you have questions we can be contacted with the info provided

Soundskins USA

13452 Alondra Blvd, Cerritos, Ca 90703

Phone: [phone]

Email: [e-mail]

www.SoundSkinsGlobal.com