SFP10G-SR - Switch ZYXEL - Free user manual and instructions

Product Type	10G SFP+ Transceiver Module
Data Rate	10 Gbps
Connector Type	Dual LC Connector
Wavelength	850 nm
Maximum Distance	300 m over OM3 Multimode Fiber
Power Consumption	≤ 1.5 W
Operating Temperature	0 °C to 70 °C
Storage Temperature	-40 °C to 85 °C
Dimensions (W x D x H)	13.7 mm x 55.5 mm x 12.2 mm
Weight	Approx. 25 g
Compliance	IEEE 802.3ae, SFF-8472, RoHS
Compatibility	ZyXEL Switches with SFP+ Slots
Digital Diagnostic Monitoring (DDM)	Supported
Cable Type	Multimode Fiber (50/125 µm)
Hot-Pluggable	Yes
Low EMI	Yes
Cleaning	Use lint-free swab with isopropyl alcohol for optical connector
Safety	Class 1 Laser Product
Repairability	Non-repairable, replace if defective

Frequently Asked Questions - SFP10G-SR ZYXEL

What is the SFP10G-SR used for?

The SFP10G-SR is a 10 Gigabit SFP+ transceiver module used for short-range fiber optic connections in switches and routers, supporting distances up to 300 meters over multimode fiber.

Is the SFP10G-SR compatible with any switch?

It is designed for ZyXEL switches with SFP+ slots, but may work with other brand switches compliant with SFF-8472. Always check compatibility with your device before purchase.

What type of fiber cable is required?

Use multimode fiber (MMF) with 50/125 µm core, preferably OM3 or OM4, to achieve the maximum distance of 300 meters.

How do I install the SFP10G-SR module?

Insert the module into an available SFP+ slot until it clicks. Ensure the fiber cable is connected to the LC connectors. The module is hot-pluggable, so no power down is needed.

What does the LED indicator mean?

Most modules have no external LEDs; link status is indicated by the switch. Refer to your switch's documentation for port LED behavior.

Can I use this module for single-mode fiber?

No, the SFP10G-SR is designed for multimode fiber. For single-mode, use the SFP10G-LR module which supports longer distances.

How to clean the optical connector?

Use a lint-free swab moistened with isopropyl alcohol to gently clean the LC connector. Avoid touching the end face with fingers and inspect with a microscope if available.

What is the power consumption of this module?

Typical power consumption is ≤ 1.5 W, making it energy-efficient for high-density deployments.

Does the module support Digital Diagnostic Monitoring (DDM)?

Yes, it supports DDM providing real-time monitoring of temperature, voltage, laser bias current, and optical power levels via the switch interface.

What should I do if the module is not recognized?

Check the switch compatibility, ensure the module is fully inserted, and clean the connectors. Also verify the switch firmware is up-to-date. If problems persist, test with another port or module.

USER MANUAL SFP10G-SR ZYXEL

ZYXELSFP and SFP+ TransceiversUser's GuideSee the Zyel website for a list of supported transceivers	IntroductionUse a Transceiver module for connection to a remote device. SFP and SFP+ Transceiver modules are hot swappable. You can install and remove a module while your device is operating.SFP/SFP+ modules both use 3.3V power input and LC-type connectors.SFP/SFP+ modules support data rate of 100M/16/10G box and single mode/multi mode connection based on its specification.Handling WarningAll modules are static sensitive. To prevent damage from electrostatic discharge (ESD), it is recommended you attach on ESD preventive wrist strap to your wrist and to a bare metal surface when you install or remove a module.	1 Installing a Module	2 Connecting a Fiber-optic Cable
EU ImporterZyel Communications AISGrassvocq 398.2 th. 2800 Seccg Denmarkhttp://www.zyel.orgUS ImporterZyel Communications Inc.350 North White Street, Anheim, CA 00808-2001http://www.zyel.comCopyright © 2019 Zyel Communications Corp. All Rights ReservedEAC	All modules are dust sensitive. When not in use, always keep the dust plug on. Avoid getting dust and other contaminant into the optical boxes, as the optics do not work correctly when obstructed with dust.Safety WarningAll modules are equipped with a Class I laser, which emits invisible radiation. Read the following safety warnings carefully.• To avoid possible eye injury, do not look into an operating fiber optic module/s connectors.• Laser radiation is present when the device or system is powered up.• Only trained and qualified personnel should be allowed to install or replace these modules.Environmental Warnings• Dispase of your fiber optic module according to all national laws and regulations.	EN 1 Attach on ESD preventive wrist strap to your wrist and to a bare metal surface.2 Remove the a module from its protective packaging.3 Locate the transmit (Tx) and the receive (Rx) markings on the module.4 Align the module in front of the slot opening on a device.5 Insert the module into the slot until the module snaps into placeNote : Module installation orientation varies depending on your device. Your module comes with a mechanism that prevents incorrect insertion. Do NOT force or twist the module into a slot. Do NOT insert an SFP+ module into a 1-3 gigabit SFP slot.	EN 1 Remove the dust plugs from a module and the cables.2 Identify the signal transmission direction of the fiber-optic cable and the module. Insert one end of the fiber-optic cable into the module.3 Insert the other end of the fiber-optic cable into a remote deviceNote : Refer to the user's guide that comes with your device for module slot status.
ZYXELYour Networking AllyWarranty CardThank you for purchasing Zyel product, Zyel has the great reputation in the market to provide best quality and performance on product and service to our customer. It is our pleasure to invite you to visit our website and register your product for receiving the latest Firmware, drive and product related information. If you still have further question or problem related to the product, please contact your vendor or our subsidiaries worldwide for further warranty information, kindly be noted the warranty terms may vary by region, detail information is available on our website, please link to http://www.zyel.com/support/warranty_information.htmlPurchase InformationZyel Product Name:Hardware Serial Number:Date of Purchase:In certain countries, the warranty will be validated with seller's signature and stamp):[e-mail]/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/ Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Other/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/ Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/Total/