BTC-1X - Network card / adapter Russound - Free user manual and instructions
Find the device manual for free BTC-1X Russound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Network card / adapter |
| Marque | Russound |
| Modèle | BTC-1X |
| Dimensions (approx.) | 8.5 in x 5.0 in x 1.7 in |
| Poids (approx.) | 2.0 lb |
| Alimentation | 12V DC, 2A |
| Fonctions principales | Stream audio over network, IR control, RCA audio output, Ethernet connection |
| Connectivité | Ethernet (RJ45), IR input, RCA stereo output |
| Entretien et nettoyage | Wipe with a dry, soft cloth. Do not use liquids or aerosols. |
| Sécurité | Keep away from moisture and heat sources. Disconnect power before cleaning. |
| Pièces détachées et réparabilité | Power supply available as spare part. No user-serviceable parts inside. |
| Garantie | 2 years limited warranty |
| Informations générales | Used in multi-room audio systems; compatible with Russound controllers. |
Frequently Asked Questions - BTC-1X Russound
How do I connect the BTC-1X to my network?
Connect an Ethernet cable from your router or switch to the RJ45 port on the back of the BTC-1X. Ensure the network supports DHCP for automatic IP assignment.
What audio sources can I stream with the BTC-1X?
The BTC-1X can stream audio from network sources such as NAS drives, internet radio, and music services compatible with Russound systems.
Does the BTC-1X require a separate amplifier?
Yes, the BTC-1X outputs line-level audio via RCA, so it must be connected to an amplifier or powered speakers.
How do I control the BTC-1X?
Control via IR remote, Russound keypads, or the Russound app (if supported). IR input is located on the back panel.
What is the maximum number of BTC-1X units I can use?
There is no hard limit, but network performance may vary. Typical installations use up to 12 units on a single network.
Can I use the BTC-1X with a third-party audio system?
The BTC-1X is designed for Russound systems but can be used with any amplifier via RCA input. Control features may be limited.
How do I reset the BTC-1X to factory defaults?
Press and hold the reset button (located near the power connector) for 10 seconds using a paperclip. The unit will restart with default settings.
What do the LED indicators mean?
Power LED: solid green when on. Network LED: flashes during activity. Status LED: solid green when connected, red on error.
The BTC-1X is not detected on my network. What should I do?
Check the Ethernet cable connection, ensure DHCP is enabled, and verify the router's connected devices list. Try a power cycle or factory reset.
Does the BTC-1X support Bluetooth?
No, the BTC-1X uses wired Ethernet for audio streaming. Bluetooth is not supported.
User questions about BTC-1X Russound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual BTC-1X - Russound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BTC-1X by Russound.