5R82G - Pregnant Russound - Free user manual and instructions
Find the device manual for free 5R82G Russound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Wall Speaker |
| Brand | Russound |
| Model | 5R82G |
| Driver Size | 5.25 inches |
| Impedance | 8 ohms |
| Power Handling (RMS) | 60 watts |
| Sensitivity | 87 dB (1W/1m) |
| Frequency Response | 50 Hz - 20 kHz |
| Cutout Dimensions | 7.5 x 7.5 inches (190 x 190 mm) |
| Overall Dimensions | 8.5 x 8.5 x 3.5 inches (216 x 216 x 89 mm) |
| Weight | 2.5 lbs (1.13 kg) |
| Color | White (paintable grille) |
| Mounting Type | Dog-ear clamp system |
| Grille | Magnetic, paintable |
| Wiring | Spring-loaded terminals |
| Cleaning and Maintenance | Wipe with dry cloth; avoid liquid cleaners |
| Safety Precautions | Do not expose to moisture; ensure secure mounting |
| Compliance | CE, RoHS |
Frequently Asked Questions - 5R82G Russound
How do I install the Russound 5R82G speaker?
Cut a hole to the specified cutout dimensions (7.5 x 7.5 inches). Connect speaker wire to the spring-loaded terminals, insert the speaker into the hole, and tighten the dog-ear clamps by turning the screws clockwise until secure.
Can I paint the grille to match my wall?
Yes, the grille is paintable. Remove it from the speaker, apply thin coats of paint, and allow to dry completely before reattaching.
What type of wire should I use?
Use 16- to 14-gauge speaker wire for distances up to 50 feet. For longer runs, use 12-gauge wire to minimize signal loss.
How do I clean the speaker?
Wipe the grille and frame with a soft, dry cloth. Avoid using water, liquid cleaners, or compressed air, as they may damage the driver.
What is the recommended amplifier power?
Pair with an amplifier delivering 10–60 watts RMS per channel at 8 ohms to achieve optimal performance without distortion.
Can this speaker be used outdoors?
No, the 5R82G is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the components.
How do I ensure proper polarity when connecting?
Connect the positive terminal (+) of the amplifier to the red terminal on the speaker, and the negative terminal (-) to the black terminal. Inconsistent polarity causes phase cancellation and poor bass.
Is this speaker compatible with 70V audio systems?
No, the 5R82G is an 8-ohm speaker designed for standard low-impedance systems. Do not connect directly to a 70V line without an appropriate step-down transformer.
What should I do if the speaker produces no sound?
Check the wire connections at both the speaker and amplifier. Ensure the amplifier is powered and the correct source is selected. Verify polarity and that the speaker is not shorted.
Can I use multiple 5R82G speakers on one amplifier channel?
Yes, but ensure the total impedance does not drop below the amplifier's minimum rating. For example, two 8-ohm speakers in parallel equal 4 ohms, which most amplifiers can handle. Use series wiring if needed.
User questions about 5R82G Russound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual 5R82G - Russound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5R82G by Russound.