WPSI 010 Professional - Drill/Driver BOSCH - Free user manual and instructions

Product Type	Cordless Drill Driver
Model	WPSI 010 Professional
Brand	Bosch
Battery Voltage	18 V
Battery Type	Lithium-Ion
Chuck Type	Keyless, 13 mm
Max Torque	50 Nm
No-Load Speed	0-400 / 0-1500 rpm (2-speed)
Drilling Capacity (Steel)	13 mm
Drilling Capacity (Wood)	35 mm
Weight (without battery)	1.2 kg
Dimensions (LxWxH)	200 x 65 x 180 mm
Power Source	Cordless, battery operated
Key Features	Variable speed trigger, LED work light, belt clip, ergonomic handle
Maintenance	Keep vents clean, check chuck regularly, store in dry place
Safety	Use safety glasses, avoid overload, disconnect battery when not in use
Spare Parts Availability	Chuck, carbon brushes, battery, charger available via Bosch service
Repairability	Designed for professional service; user-replaceable carbon brushes
General Information	Part of Bosch Professional series; compatible with 18V battery system

Frequently Asked Questions - WPSI 010 Professional BOSCH

What battery types are compatible with the Bosch WPSI 010 Professional?

The drill driver is compatible with all Bosch Professional 18V Lithium-Ion batteries from the compact to high-capacity range.

How do I change the drill bit?

Rotate the keyless chuck counterclockwise to open, insert the bit, then tighten clockwise by hand. Ensure the bit is centered.

What is the maximum torque of this drill?

The maximum torque is approximately 50 Nm, suitable for most drilling and screwdriving tasks.

Can I use this drill for hammer drilling?

No, the WPSI 010 is a drill driver only and does not have a hammer function. For masonry, use a hammer drill.

How to maintain the drill?

Keep the ventilation slots clear of dust, wipe the housing with a damp cloth, and periodically check the carbon brushes for wear.

What is the recommended battery charger?

Use Bosch chargers like the AL 18xx series for optimal charging speed and battery life.

Is the drill overload protected?

Yes, the drill features electronic overload protection to prevent motor damage under excessive load.

How do I adjust the speed?

The speed is controlled by the variable speed trigger; harder press = higher speed. Also, the 2-speed gearbox allows switching between low (0-400 rpm) and high (0-1500 rpm).

What is the weight of the drill without battery?

The drill weighs approximately 1.2 kg without battery, making it lightweight and easy to handle.

Where can I find spare parts?

Spare parts like chuck, carbon brushes, and battery are available from Bosch Professional service centers and authorized dealers.

USER MANUAL WPSI 010 Professional BOSCH

The right size clothing

Pay attention to these points:

A Chest measurement:

Put the tape measure horizontally around the widest part of your chest. This is used for jackets/combinations. Example: if your chest measures 102 cm, select a 104 cm jacket (always round measurements up). If you wear a pullover under the jacket, select the next size up, i.e. 112 cm.

K Measurement for low and normal waist height:

Put the tape measure horizontally around your waist.

L Hip measurement:

Put the tape measure horizontally around your hips.

E Leg length:

Measure from the crotch to the floor without wearing shoes. Normal 82 cm (32"), Long 90 cm (35").

Jackets, vests and shirts

Size S M L XL 2XL
A Chest measurement (cm)	92	100	104	112	116
A Chest measurement (inches)	36 39.5 41 44 45.5

Trousers and shorts

Size	C46	C47	C48	C49	C50	C51	C52	C54	C56	C58
K/L Waist size (cm)	78	80.5	83	85.5	88	90.5	93	98	103	108
K/L Waist size (inches, jeans size)	30	31	32	33	34	35	36	38	40	42

E Leg length (cm) 82	90
E Leg length (inches, jeans size)	32	35

When measuring trousers, the leg length E and the waist size are put together to form a combined size. For example, leg length E=82 and waist size K/L=78 results in a combined size of 82C46

Shoes and boots

Size
EU	40	41	42	43	44	45	46
UK	61/2	7	8	9	10	101/2	11

Heated outdoor jacket

for work and leisure

The right size clothing -

Pay attention to these points:

Chest measurement: Put the tape measure horizontally around the widest part of your chest. Example: if your chest measures 102 cm, select a jacket with chest measurement of 106 cm (always round measurements up). If you wear a pullover under the jacket, select the next size up, i.e. a jacket with chest measurement of 112 cm.

Height / Back length: Put the tape measure vertically from your neck to your coccyx.

Arm length: Put the tape measure from your wrist to your shoulder.

Heat+ Jacket 10.8 Volt Professional Men's version

		SMLXLXXL3XL
A	Chest measurement in cm	92	100	104	112	116	124
B	Height / Back length in cm	73	74	76	76	80	80
C	Arm length in cm	64	65	66	67	68	70

Heat+ Jacket 10.8 Volt Professional Ladies' version

		XSSMLXL
A	Chest measurement in cm 78 84 90 96 102
B	Height / Back length in cm 72 73 73 75 76
C	Arm length in cm 59 60 61 62 63