FS510T - Switch NETGEAR - Free user manual and instructions
Find the device manual for free FS510T NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Unmanaged Fast Ethernet Switch |
| Model | FS510T |
| Brand | NETGEAR |
| Ports | 5 x 10/100 Mbps RJ-45 |
| Network Standards | IEEE 802.3, 802.3u, 802.3x |
| Switching Capacity | 1.0 Gbps |
| Forwarding Rate | 0.744 Mbps (64-byte packets) |
| MAC Address Table Size | 1 K entries |
| Jumbo Frame Support | No |
| Power Supply | External adapter, 5V DC |
| Power Consumption | 2.5W (max) |
| Dimensions (W x D x H) | 4.25 x 2.95 x 1.06 in (108 x 75 x 27 mm) |
| Weight | 0.4 lb (0.18 kg) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Activity per port |
| Mounting | Desktop or wall-mountable (screws included) |
| Fan | Fanless (silent operation) |
| Management | Unmanaged (plug-and-play) |
| Features | Auto-negotiation, auto-MDI/MDIX, store-and-forward |
| Cleaning | Wipe with a dry, soft cloth. Do not use liquids or sprays. |
| Safety | Keep away from water, heat sources, and direct sunlight. |
| Spare Parts & Repairability | No user-serviceable parts. Contact NETGEAR support for replacements. |
| Warranty | Limited lifetime warranty (from NETGEAR) |
Frequently Asked Questions - FS510T NETGEAR
How do I set up my NETGEAR FS510T switch?
The FS510T is plug-and-play. Connect the power adapter, then connect Ethernet cables from your devices to any port. The switch will automatically configure itself.
What is the maximum cable length supported?
The FS510T supports standard Ethernet cable lengths up to 100 meters (328 feet) per segment.
Does the FS510T support PoE (Power over Ethernet)?
No, the FS510T does not support PoE. It only passes data signals.
Can I mount this switch on a wall?
Yes, the FS510T has mounting holes on the bottom. Use two screws (not included) to mount it securely on a wall.
What do the LED lights mean?
The Power LED shows solid when powered. Each port has a Link/Activity LED: solid green indicates a link, blinking indicates activity.
My switch seems slow. What can I check?
Ensure all cables are Cat5e or better. Check for network congestion or faulty devices. The switch operates at 10/100 Mbps; upgrade to a Gigabit switch for faster speeds.
Can I connect this switch to a router?
Yes, connect one port of the FS510T to any LAN port of your router using a standard Ethernet cable. The switch will expand your wired network.
Is the FS510T compatible with Gigabit devices?
Yes, Gigabit devices can connect, but they will operate at 10/100 Mbps speed due to the switch's limitation.
How do I clean the switch?
Disconnect power. Use a dry, soft cloth to wipe the exterior. Never use liquids, solvents, or abrasive cleaners.
What should I do if the switch stops working?
Check the power adapter and cable connections. Try a different power outlet. If still not working, contact NETGEAR support for warranty assistance.
User questions about FS510T NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FS510T - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS510T by NETGEAR.