ProLiant DL380e G8 - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL380e G8 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Form Factor | 2U Rack |
| Dimensions (H x W x D) | 8.73 cm x 44.54 cm x 67.95 cm |
| Weight | Approximately 27 kg (max configuration) |
| Processor Support | Dual Intel Xeon E5-2600 v2 series |
| Memory | Up to 384 GB DDR3 ECC (24 DIMM slots) |
| Storage Drive Bays | 8 or 14 LFF/SFF hot-plug SAS/SATA |
| Power Supply | 2 x 460 W or 750 W hot-plug redundant |
| Network Interfaces | 4 x 1 GbE, optional 10 GbE |
| Remote Management | HP iLO 4 |
| RAID Controller | HP Smart Array P420i / P821 (optional) |
| Expansion Slots | 7 PCIe 3.0 |
| Cooling | 8 hot-plug fans (N+1 redundancy) |
| Operating Temperature | 10°C to 35°C |
| Power Efficiency | 80 PLUS Gold certified |
| Maintenance | Tool-less access for drives, fans, and PSUs |
| Safety | Disconnect power before servicing; ESD precautions |
| Spare Parts Availability | Hot-plug HDD, PSU, fan modules, memory DIMMs |
| Operating System Support | Windows Server, Linux distributions, VMware |
| Included Accessories | Rail kit, power cords, manual CD |
Frequently Asked Questions - ProLiant DL380e G8 HP
How do I reset the iLO password?
Press the iLO reset button on the system board for 5 seconds to default the password to 'admin'.
What RAID levels are supported?
The HP Smart Array P420i supports RAID 0, 1, 5, 6, 10, 50, and 60 with optional cache upgrade.
How do I replace a failed hard drive?
Simply remove the hot-plug drive from its bay and insert a new one. The RAID controller will rebuild automatically.
Can I upgrade the memory?
Yes, the DL380e G8 supports up to 384 GB using PC3L-10600R DDR3 registered memory. Ensure matching modules across channels.
How to access the server remotely?
Use HP iLO 4 web interface. Default IP is 192.168.1.1 if not configured. Login with admin credentials.
What is the maximum supported processor TDP?
The server supports Xeon E5-2600 v2 series with a maximum TDP of 130W per socket.
How do I install the server in a rack?
Attach the supplied rail kit to the server and rack rails, then slide the server in and secure with screws.
Why does the server beep continuously at boot?
Continuous beeps indicate a hardware failure. Check the post codes on the system board or iLO logs for the specific component.
Can I mix different-sized memory modules?
It is recommended to use identical modules for optimal performance. Mixing may reduce speed to 1333 MHz.
How to update the firmware?
Download the latest firmware from HP Support and use the iLO web interface or HP Smart Update Manager (SUM) to apply updates.
User questions about ProLiant DL380e G8 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL380e G8 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL380e G8 by HP.