ProLiant DL325 G10 Plus - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL325 G10 Plus HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 1U |
| Dimensions (H x W x D) | 4.44 cm x 43.46 cm x 76.93 cm |
| Weight (maximum) | 12.5 kg |
| Processor | AMD EPYC 7003 series |
| Memory | Up to 4 TB DDR4-3200 |
| Storage | Up to 24 SFF SAS/SATA/NVMe drives |
| Power Supply | Dual redundant, 800W or 1600W options |
| Networking | Embedded 4x 1GbE, optional OCP 3.0 |
| Management | HP iLO 5 |
| Expansion Slots | 2x PCIe 4.0 x16, 1x OCP 3.0 |
| Power Consumption (typical) | 250 W - 500 W |
| Operating Temperature | 10°C to 35°C |
| Cooling | 6x hot-pluggable redundant fans |
| Maintenance | Tool-less access to drives, fans, and power supplies |
| Safety | ESD precautions required; proper grounding recommended |
| Spare Parts & Repairability | FRU model: CPU, memory, drives, PSU, fans, and controller available |
| General Information | Enterprise-class server for virtualization and cloud workloads |
Frequently Asked Questions - ProLiant DL325 G10 Plus HP
How do I perform the initial setup of the HP ProLiant DL325 G10 Plus?
Connect the server to a power source and network, then power on. Access the HP iLO interface via the default IP address to configure system settings, set up RAID, and install an operating system.
What operating systems are supported on this server?
Supported OS include Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi, and others. Check HP’s compatibility matrix for specific versions.
How do I configure RAID on the HP ProLiant DL325 G10 Plus?
Use the HP Smart Storage Administrator (HP SSA) during POST or from within the OS. Create logical drives by selecting the RAID level (0, 1, 5, 6, 10) and disk members.
How can I access the HP iLO remote management?
Connect to the server’s iLO dedicated network port, then open a web browser to the iLO IP address. Use the default credentials (printed on the server label) to log in and manage the server remotely.
What steps should I take for power supply redundancy?
Install two power supplies of the same wattage and connect each to a separate power source. The server automatically load-balances and provides failover if one PSU fails.
How do I clean and maintain the server?
Power off and unplug the server. Use compressed air to blow dust from fans, vents, and components. Avoid liquid cleaners. Check and replace air filters if present.
Can I expand storage beyond the initial 24 drive bays?
Yes, you can connect external storage enclosures via SAS or utilize HP Smart Array controllers to add more drives. Ensure the controllers support the expansion.
How do I update firmware on the HP ProLiant DL325 G10 Plus?
Download the latest SPP (Service Pack for ProLiant) from HP support. Use the HP Smart Update Manager (HP SUM) tool to apply firmware updates to all components.
What is the recommended procedure in case of hardware failure?
Identify the faulty component via iLO logs or system LEDs. For FRU parts like drives or fans, use hot-plug replacement if supported. For other parts, power down the server and replace the faulty module.
Is there a warranty and how do I get support?
The server comes with a standard 3-year warranty for parts and labor. For technical support, contact HP Support or visit the HP support website with your product serial number.
User questions about ProLiant DL325 G10 Plus HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL325 G10 Plus - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL325 G10 Plus by HP.