ProLiant ML570 G3 - Server HP - Free user manual and instructions
Find the device manual for free ProLiant ML570 G3 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server (Tower) |
| Brand | HP |
| Model | ProLiant ML570 G3 |
| Processor | Up to 4 Intel Xeon MP (up to 3.66 GHz) |
| Memory | Up to 64 GB DDR (16 DIMM slots) |
| Storage | Up to 10 hot-plug SCSI/SAS hard drives |
| RAID Support | Smart Array 5i or 6i controller |
| Remote Management | HP Integrated Lights-Out (iLO) Standard |
| Form Factor | 7U Tower or Rack-mountable |
| Dimensions (H x W x D) | 17.5 x 9 x 24.5 in (44.5 x 22.9 x 62.2 cm) |
| Weight | Up to 60 lb (27.2 kg) depending on configuration |
| Power Supply | 2 x 800W or 2 x 1200W hot-plug redundant |
| Cooling | 4 hot-plug fans with redundant configuration |
| Expansion Slots | 7 PCI-X slots (4 hot-plug) |
| Network | Dual embedded Gigabit Ethernet (NC7761) |
| Operating Systems Supported | Windows Server, Linux, Novell NetWare |
| Maintenance | Clean air filters quarterly; replace fans and drives as needed |
| Safety | Use grounded outlets; do not block vents; follow ESD precautions |
| Spare Parts | Hard drives, memory modules, power supplies, fans, RAID battery |
| Warranty | Standard 3-year parts and labor (depends on region) |
Frequently Asked Questions - ProLiant ML570 G3 HP
How do I install an operating system on the HP ProLiant ML570 G3?
Use the SmartStart CD that came with the server to configure hardware and install supported OS like Windows Server 2003 or Linux.
How can I upgrade the memory on this server?
Install registered ECC DDR DIMMs in the 16 slots. Populate banks in pairs, starting with the first bank.
What is the procedure to replace a failed hard drive?
Ensure the drive is hot-plug capable. Remove the failed drive from its bay, insert a new drive, and rebuild the RAID array using the Smart Array controller utility.
How do I reset the Integrated Lights-Out (iLO) to factory defaults?
Press and hold the iLO reset button (pinhole) on the server for 10 seconds, or use the iLO command line: reset /system1.
What RAID levels does the Smart Array 5i controller support?
It supports RAID 0, 1, 1+0, and 5. Use the Array Configuration Utility (ACU) to set up arrays.
Why is my server overheating and how can I fix it?
Check for blocked air vents, dirty fans, or failed fan modules. Clean filters and ensure ambient temperature is below 35°C.
Can I use non-HP memory in the ProLiant ML570 G3?
It is recommended to use HP-qualified memory to ensure compatibility. Non-HP memory may cause errors or system instability.
How do I access the BIOS/System Setup?
Press F9 during POST (when prompted) to enter the ROM-Based Setup Utility (RBSU).
What are the power supply requirements for this server?
The server accepts 100-240 V AC with a frequency of 50-60 Hz. Use two power supplies for redundancy; each is typically 800W or 1200W.
How do I update the firmware on the ProLiant ML570 G3?
Download the latest firmware from HP Support website. Use the Smart Update Manager (SUM) or bootable media to apply updates.
User questions about ProLiant ML570 G3 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant ML570 G3 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant ML570 G3 by HP.