G7000 - Pregnant EDIFIER - Free user manual and instructions
Find the device manual for free G7000 EDIFIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Model | G7000 |
| Brand | Edifier |
| Dimensions (W x H x D) | 250 mm x 150 mm x 200 mm |
| Weight | 3.2 kg |
| Power Output | 30 W RMS (15 W per channel) |
| Frequency Response | 60 Hz – 20 kHz |
| Impedance | 8 ohms |
| Connectivity | Bluetooth 5.0, AUX (3.5 mm), USB, Optical |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Input Voltage | 100 – 240 V AC, 50/60 Hz |
| Speaker Configuration | 2-way: 1 inch tweeter, 4 inch woofer |
| Enclosure Type | Bass reflex with rear port |
| Remote Control | Included (wireless) |
| Controls | Volume, source, power on speaker |
| Audio Inputs | AUX, USB, Optical, Bluetooth |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Do not expose to water or high humidity. Unplug during thunderstorms. |
| Spare Parts / Repairability | Contact Edifier service for replacement parts. Repairability score: 6/10. |
Frequently Asked Questions - G7000 EDIFIER
How do I pair the Edifier G7000 with my phone via Bluetooth?
Ensure the speaker is turned on and in Bluetooth mode (press the source button until Bluetooth indicator blinks). On your phone, enable Bluetooth and search for 'Edifier G7000'. Select it to pair. If prompted, enter PIN 0000.
Can I connect the speaker to a TV without Bluetooth?
Yes, use the AUX (3.5 mm) or Optical input. Connect a cable from your TV's audio output to the corresponding input on the speaker. Then select the correct source on the speaker.
How do I clean the speaker?
Use a soft, lint-free cloth slightly dampened with water. Wipe the exterior gently. Do not use alcohol, ammonia, or abrasive cleaners. Avoid getting moisture into openings.
What should I do if there is no sound?
Check that the speaker is powered on and the volume is not muted. Verify the correct input source is selected. Ensure the connected device is playing audio and the cable (if wired) is securely plugged in. Try a different source or cable.
How do I reset the Edifier G7000 to factory settings?
Press and hold the 'Volume +' and 'Source' buttons simultaneously for about 5 seconds until the speaker resets. All settings will return to defaults and Bluetooth pairing list will be cleared.
What is the Bluetooth range of the G7000?
The effective Bluetooth range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.
Can I use the speaker while charging?
Yes, the Edifier G7000 can be used while connected to the power adapter. It does not have a built-in battery; it requires AC power.
Is there a remote control included?
Yes, the speaker comes with a wireless remote control that allows you to adjust volume, change sources, and power on/off from a distance.
How do I update the firmware on my G7000?
Firmware updates are available from Edifier's official website. Connect the speaker to a computer via USB and follow the instructions in the update tool. Alternatively, check if the speaker supports OTA updates via the Edifier app.
What are the dimensions and weight of the speaker?
Each speaker measures approximately 250 mm x 150 mm x 200 mm (W x H x D) and weighs about 3.2 kg.
User questions about G7000 EDIFIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual G7000 - EDIFIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G7000 by EDIFIER.