K181X90 - Range hood SMEG - Free user manual and instructions
Find the device manual for free K181X90 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Smeg |
| Model | K181X90 |
| Installation Type | Wall-mounted / Chimney |
| Width | 90 cm |
| Color/Finish | Stainless Steel |
| Extraction Rate (Max) | 600 m³/h |
| Noise Level (Max) | 65 dB |
| Number of Motor Speeds | 3 |
| Control Type | Electronic push buttons |
| Lighting | LED, 2x3W |
| Filter Type | Aluminum grease filter |
| Duct Diameter | 150 mm |
| Energy Class | A |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Power Consumption | 150 W |
| Dimensions (WxDxH) | 900 x 500 x 600-1000 mm |
| Weight | 18 kg |
| Exhaust Configuration | Ducted or recirculation (with optional charcoal filter) |
| Warranty | 2 years |
| Grease Filter Cleaning | Dishwasher safe |
| Safety Features | Auto shut-off timer (optional) |
Frequently Asked Questions - K181X90 SMEG
How to install the Smeg K181X90 range hood?
Installation should be performed by a qualified technician. Ensure the hood is mounted at least 65 cm above the cooking surface. Secure the chimney to the wall using the provided brackets, connect the duct to the exhaust outlet, and wire the hood to a 220-240V power supply. Refer to the manual for detailed steps.
How to clean the grease filters?
Remove the aluminum grease filters by releasing the clips. Wash them in a dishwasher or by hand with warm water and mild detergent. Ensure they are completely dry before reinstalling. Clean monthly or more often with heavy use.
Can the hood be used in recirculation mode?
Yes, if you purchase the optional charcoal filter (model code C150). The filter absorbs odors and recirculates clean air back into the kitchen. The charcoal filter should be replaced every 3-6 months.
What is the recommended duct size for installation?
Use a rigid or flexible duct with a diameter of 150 mm. A smaller diameter may reduce extraction performance and increase noise. Keep the duct length as short as possible with minimal bends.
How to replace the LED lights?
Turn off the power and wait for the LEDs to cool. Use a flat screwdriver to gently pry out the old LED module. Disconnect the wire connector, attach the new module (Smeg part 9410118), and secure it in place. Restore power.
Why is my hood not turning on?
Check if the power cord is plugged in and the circuit breaker is on. Ensure the control buttons are not locked. If the issue persists, inspect the internal fuse or contact Smeg customer service.
How to reduce noise from the hood?
Use the lower fan speed settings for quiet operation. Ensure the ductwork is properly sealed and not obstructed. Clean the grease filters regularly to maintain airflow. If noise persists, check for loose components.
When should I replace the charcoal filter?
Replace the charcoal filter every 3 to 6 months, depending on cooking frequency. A filter that is saturated will no longer absorb odors effectively. The hood may also have a filter saturation indicator.
How to pair a remote control with the hood?
This model comes with push-button controls; no remote is included. If you wish to use a universal remote, check compatibility with Smeg accessories. Refer to the manual for any optional remote pairing process.
What maintenance does the hood require?
Clean the exterior with a soft damp cloth and mild detergent. Wash grease filters monthly. Replace charcoal filters if used. Periodically check the duct connection for leaks. Annual professional servicing is recommended.
User questions about K181X90 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual K181X90 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K181X90 by SMEG.