KC90AO - Range hood SMEG - Free user manual and instructions
Find the device manual for free KC90AO SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Smeg |
| Model | KC90AO |
| Width | 90 cm (35.4 in) |
| Installation Type | Wall-mounted chimney hood |
| Maximum Extraction Rate | 600 m³/h (ducted mode) |
| Number of Speeds | 3 + boost |
| Noise Level (max) | 62 dB |
| Control Type | Touch control panel |
| Lighting | 2 x 3W LED |
| Grease Filter | Aluminum washable filter |
| Carbon Filter (optional) | Yes, for recirculation mode |
| Energy Class | A |
| Power Consumption | 150 W |
| Duct Diameter | 150 mm |
| Material | Stainless steel with tempered glass |
| Height Adjustment | Telescopic chimney |
| Net Weight | 19 kg |
| Additional Functions | Delay shut-off, filter saturation indicator |
| Safety Features | Thermal switch, automatic motor protection |
Frequently Asked Questions - KC90AO SMEG
How do I install the Smeg KC90AO range hood?
Installation should be performed by a qualified professional. Ensure the hood is mounted at least 65 cm above the cooking surface for electric hobs and 75 cm for gas hobs. Refer to the manual for detailed mounting instructions.
Can I use the range hood in recirculation mode?
Yes, the KC90AO can be used in recirculation mode. You will need to install a carbon filter (not included) to filter odors before the air is recirculated back into the kitchen.
How often should I clean the grease filters?
The aluminum grease filters should be cleaned every month or when the filter saturation indicator lights up. They are dishwasher safe; wash at low temperature and allow to dry before reinserting.
How do I replace the carbon filter?
The carbon filter should be replaced every 3-6 months depending on usage. To replace, remove the grease filters, then remove the old carbon filter and insert the new one. Ensure the filter is securely in place.
What is the maximum extraction rate?
The maximum extraction rate is 600 m³/h in ducted mode. In recirculation mode, the rate may be slightly lower due to additional resistance from the carbon filter.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the boost button for about 3 seconds until the indicator light turns off, resetting the count.
Why is the hood making excessive noise?
Excessive noise may be due to loose parts, a clogged filter, or improper installation. Check that the filters are clean and properly fitted. If the noise persists, contact a service technician.
What are the dimensions of the KC90AO?
The hood has a width of 90 cm (35.4 in). The telescopic chimney can adjust to fit ceiling heights between 220 and 280 cm. Refer to the manual for full dimensions.
How do I use the delay shut-off function?
Press the delay button (hourglass icon) while the motor is running. The hood will continue to operate for 10 minutes and then shut off automatically. This is useful to clear remaining odors.
The remote control is not working. What should I do?
First, check that the remote has fresh batteries and is pointed at the receiver. Ensure there are no obstructions. If the issue persists, reset the hood by disconnecting power for 10 seconds and reconnecting.
User questions about KC90AO SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KC90AO - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KC90AO by SMEG.