FTA-CP-RJ45-102 - Home Automation Controller Crestron - Free user manual and instructions
Find the device manual for free FTA-CP-RJ45-102 Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Automation Controller |
| Brand | Crestron |
| Model | FTA-CP-RJ45-102 |
| Dimensions (H x W x D) | 1.2 x 4.3 x 3.6 in (30 x 109 x 91 mm) |
| Weight | 0.5 lb (225 g) |
| Power Supply | PoE (Power over Ethernet) or 24 VDC external adapter |
| Power Consumption | 5 W max |
| Processor | 32-bit ARM Cortex-M4 |
| Memory | 256 MB RAM, 512 MB Flash |
| Ethernet Ports | 1 x RJ45 10/100 Mbps |
| Control Interfaces | RS-232, IR, I/O ports, Cresnet |
| Main Functions | Automation control for lighting, shades, HVAC, AV systems; supports Crestron Home OS |
| Operating Temperature | 32-104°F (0-40°C) |
| Mounting | DIN rail or surface mount |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Low voltage device; follow local electrical codes. |
| Spare Parts & Repairability | Contact Crestron for replacement parts and service. |
| General Information | Manufactured in the USA; supports firmware updates via network. |
| Warranty | 3 years limited warranty |
Frequently Asked Questions - FTA-CP-RJ45-102 Crestron
How do I connect the FTA-CP-RJ45-102 to my network?
Connect an Ethernet cable from your router or switch to the RJ45 port on the controller. The device supports PoE, so if your switch provides PoE, no separate power supply is needed. Otherwise, connect the optional 24 VDC adapter.
What software is required to program this controller?
Use Crestron Home or SIMPL Windows programming software. For simple setups, the Crestron Home app can configure basic automation.
Can I control lighting and shades with this device?
Yes, the FTA-CP-RJ45-102 can control Crestron lighting modules, shade motors, and other devices via Cresnet, IR, or RS-232 connections.
What is the maximum number of devices it can control?
The controller supports up to 100 Cresnet devices and multiple IR/RS-232 devices depending on available ports and system load.
Does it work with third-party smart home systems?
Yes, through IP control and drivers, it can integrate with systems like Sonos, Lutron, and many others. Check Crestron's driver database for compatibility.
How do I update the firmware?
Connect the controller to the internet and use the Crestron Home app or Toolbox software to check for and install firmware updates.
What should I do if the controller is not powering on?
Verify PoE from your switch or check the 24 VDC adapter. Ensure the Ethernet cable is securely connected. Try a different port or cable. If still no power, contact Crestron support.
Can I mount this controller on a DIN rail?
Yes, the FTA-CP-RJ45-102 is designed for DIN rail mounting (35 mm) or surface mounting with screws. Mounting kit may be required.
Is the controller compatible with Crestron touch screens?
Yes, it works with Crestron TSW series touch screens via Ethernet or Cresnet for user interface and scheduling.
How can I reset the controller to factory defaults?
Press and hold the RESET button (small pinhole) on the front panel for 10 seconds until the LED blinks rapidly. This clears all programming and restores factory settings.
User questions about FTA-CP-RJ45-102 Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation Controller in PDF format for free! Find your manual FTA-CP-RJ45-102 - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTA-CP-RJ45-102 by Crestron.