NE8FDP-R-B - Uncategorized Neutrik - Free user manual and instructions
Find the device manual for free NE8FDP-R-B Neutrik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | EtherCON D-Series Feedthrough Connector |
| Gender | Female (Jack) |
| Number of Contacts | 8 (RJ45) |
| Body Color | Black (B variant) |
| Panel Cutout | D-shape, 20.3 x 14.2 mm |
| Overall Depth | 19.8 mm (panel mount) |
| Weight | Approx. 6 g |
| Rated Voltage | 50 V (AC/DC) |
| Rated Current | 1.5 A per contact |
| Mating Cycles | > 1000 |
| Locking Mechanism | Push-pull latch |
| Housing Material | Zinc die-cast, nickel plated |
| Insert Material | Polyamide (PA66) |
| Operating Temperature | -30 °C to +80 °C |
| Protection Class | IP20 (mated) |
| Cable Connection | No cable exit; feedthrough for chassis |
| Mounting Type | Panel mount, D-shape hole |
| Standards | IEC 60603-7, IEEE 802.3 |
Frequently Asked Questions - NE8FDP-R-B Neutrik
Is the NE8FDP-R-B suitable for PoE (Power over Ethernet)?
Yes, it supports PoE, PoE+, and PoE++ up to 100W as per IEEE 802.3 standards due to its 1.5A contact rating.
What is the recommended panel thickness for mounting?
The connector fits panel thickness from 0.8 mm to 4.0 mm. Ensure the D-cutout is 20.3 x 14.2 mm.
Does the NE8FDP-R-B come with a dust cap?
The B variant (black) is the connector only. Dust caps are sold separately (e.g., NE8DCA-B).
Can I use this connector with Cat6a or Cat7 cables?
Yes, it is compatible with EtherCON plugs for Cat5e, Cat6, Cat6a, and Cat7 cables. The feedthrough itself does not limit category.
Is the NE8FDP-R-B waterproof?
It is rated IP20 which is not waterproof. For outdoor use, consider the NE8FDP-W or use a weatherproof enclosure.
How do I release the locking mechanism?
Pull back the sleeve on the mating plug to disengage the latch. The feedthrough has no moving parts.
What is the difference between NE8FDP-R-B and NE8FDV-B?
NE8FDP-R-B has a right-angle PCB connection internally (though it's a feedthrough), while NE8FDV-B is vertical. Both are D-series feedthroughs.
Can I solder wires directly to the NE8FDP-R-B?
No, this is a feedthrough connector designed for mating with an EtherCON plug. It does not have solder terminals; it is for panel pass-through.
What tools are needed for installation?
You need a D-shape punch or file to create the cutout and a screwdriver for the mounting screws (two M2.5 screws included).
Is the NE8FDP-R-B shielded?
Yes, the metal housing provides 360° shielding when mated with a shielded EtherCON plug.
User questions about NE8FDP-R-B Neutrik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual NE8FDP-R-B - Neutrik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NE8FDP-R-B by Neutrik.