StudioMax III AKC160 - Lighting Photogenic - Free user manual and instructions
Find the device manual for free StudioMax III AKC160 Photogenic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Studio Flash Monolight |
| Model | StudioMax III AKC160 |
| Brand | Photogenic |
| Power Output | 160 Ws |
| Power Adjustment | Variable from 1/8 to full power |
| Recycling Time | Approximately 0.5–1.5 seconds |
| Modeling Lamp | Built-in 150W halogen lamp |
| Flash Duration | 1/800 to 1/2000 seconds |
| Color Temperature | 5600K ± 200K |
| Power Supply | AC 100–240V, 50/60Hz |
| Dimensions (approx.) | 20 × 20 × 30 cm (without reflector) |
| Weight | 2.5 kg |
| Sync Connection | 3.5mm sync port and built-in slave cell |
| Mounting | Standard 5/8" light stand receiver |
| Main Features | Variable power output, modeling lamp, optical slave, overheat protection |
| Care & Cleaning | Wipe with dry cloth; avoid moisture; keep vents clear |
| Safety | Do not touch flash tube when hot; use grounded outlets; replace fuse with same type |
| Spare Parts | Flash tube, modeling lamp, fuse, sync cable |
| Repairability | User-accessible fuse; other repairs by authorized service center |
| General Information | Professional studio flash for portrait, product, and small studio photography |
Frequently Asked Questions - StudioMax III AKC160 Photogenic
How do I adjust the power output?
Use the power control dial on the back of the unit. Turn to select power levels from 1/8 to full power. The exact setting is indicated by a scale or LED display.
Can I use this flash with Bowens or other modifiers?
The StudioMax III AKC160 typically has a built-in reflector mount compatible with Photogenic's proprietary system. To use Bowens S-mount modifiers, you may need an adapter ring sold separately.
How do I trigger the flash wirelessly?
The flash has a built-in optical slave that triggers when it detects another flash. For radio triggering, connect a wireless receiver to the sync port (3.5mm jack).
What is the recycling time?
At full power, recycling time is approximately 1.5 seconds. At lower power settings, it can be as fast as 0.5 seconds. A ready light indicates when the flash is fully charged.
Is the modeling lamp dimmable?
Yes, the modeling lamp has a separate on/off switch and is proportional to the flash power setting in many versions. It can also be turned off independently.
What type of flash tube is used?
The unit uses a standard Photogenic flash tube rated for 160 Ws. Replacement tubes can be ordered from Photogenic or authorized dealers.
Can I use this flash on a regular light stand?
Yes, the flash has a 5/8-inch (16mm) receiver that fits most light stands. Ensure the stand is rated for at least 2.5 kg to safely support the weight.
What safety precautions should I take?
Always allow the flash tube and modeling lamp to cool before touching. Use grounded power outlets. Do not block ventilation slots. Replace the fuse only with the same type and rating.
How do I clean the flash?
Unplug the unit and let it cool. Wipe the exterior with a soft, dry cloth. Do not use liquids or cleaners. Clean the reflector and flash tube gently with a blower brush if dusty.
Where can I find spare parts?
Contact Photogenic customer service or authorized dealers. Common spare parts include flash tubes, modeling lamps, fuses, and sync cables. Use only genuine parts for safety.
User questions about StudioMax III AKC160 Photogenic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual StudioMax III AKC160 - Photogenic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. StudioMax III AKC160 by Photogenic.